Rapid advances in antennas, propagation, electromagnetics, and materials are opening new and unexplored opportunities in body area sensing and stimulation. Next-generation wearables and implants are seamlessly providing round-the-clock monitoring. In turn, numerous applications are brought forward with the potential to ultimately transform healthcare, sports, consumer electronics, and beyond. This review paper provides a comprehensive overview, discusses challenges and opportunities, and indicates future directions for: (a) enabling technologies needed to make body area sensing and stimulation a reality, and (b) emerging bioelectromagnetics applications that may readily benefit from such technologies.
29 April 2022 in IEEE Open Journal of Antennas and Propagation
In this article, we report the first ever antenna array with >90% transparency that is intended for 5G networks for smart cities. This level of transparency is achieved by using Gallium-doped Zinc Oxides. The array designed and tested is for sub-6GHz 5G and operates at 5.8GHz. This seamless design allows such arrays to be integrated into windows of buildings within the smart city to provide consistent network coverage. The phased array has good gain and scanning characteristics as presented below. We have also included a discussion regarding gain and beam steering capabilities in comparison to similar arrays made of conventional copper and RF substrates. This study presents the comparison of two antenna arrays, one constructed from copper antenna elements (Simulated operational band from 5.67 GHz to 6.62 GHz, 7.6% bandwidth, and gain of 2.18 dBi) and one constructed from GZO antenna elements (Simulated operational band from 2.8 GHz to 10 GHz, 112.5% bandwidth, approximately 8% efficiency, and a gain of -10.87 dBi). Both element designs have a 1.5cm by 1.5cm footprint. The results show that a 4x1 array of GZO elements will increase the gain to 0.34 dBi from a gain of -10.87 dBi of a thin film, GZO antenna element. In addition, over 90% transparency allows window integration without obstructing the view. The techniques described in this article also can be used to integrate such arrays in glasses and other transparent materials for various IoT applications.
12 February 2024 in IEEE Antennas and Propagation Magazine
Growing demand in the wearable device industry for noninvasive, user-connected, and real-time activity trackers and body monitors is increasing the need for low-profile wearable antennas on fabric substrates, particularly for health and safety applications. Current data regarding environmental and human factors in this field that affect the real-world use of the devised antennas are incomplete. This article presents data regarding the impact of garment position, especially the distance between the skin and fabric substrate, on antenna performance. A distance of the substrate from the skin in the less than a 5-mm range was found to have a significant influence on antenna performance. The effects of humidity and dampness on the permittivity of five types of fabrics commonly used in commercial and health care-related garments are also investigated. The performance of a textile-based RFID printed directly on a nonconductive interface layer situated on single jersey knit cotton fabric was studied, and sheet resistance results of inkjet printing with two conductive nanoparticle inks from NovaCentrix are presented.
10 April 2023 in IEEE Open Journal of Antennas and Propagation
We report the fabrication methodology of stereolithography (SLA) printed molds for metal and resin cast antennas. In the first method, a conical horn created using metal cast molds printed from a glass-filled resin utilizes a casting technique allowing for low-cost 3D printing to fabricate metal antennas, reducing the losses incurred by metallized plastics, while still producing complex geometries quickly. This metal cast conical horn is compared to a horn constructed using a more traditional 3D printing method. The second casting method demonstrates the interchangeability between creating parts via SLA printing with a glass-filled resin and using the same resin cast into a reusable Polydimethylsiloxane (PDMS) mold. We demonstrate this method by casting an interchangeable slug for a capacitively coupled, mechanically reconfigurable disk loaded monopole. Simulated and experimental data are presented for S11, and Gain. Simulated BW, directivity, gain and efficiency as a function of frequency are presented. The results indicate that the 3D printed metal casting process produces antennas with a higher gain and lower return loss than metallized resin antennas. The method is suitable for difficult geometries requiring resolution of at least 50 lm. The capacitively coupled disk loaded monopole demonstrates the versatility of 3D printing in antenna fabrication.
31 December 2024 in IEEE Transactions on Antennas and Propagation
Conventional electromagnetic antennas cannot be aggressively miniaturized since their gain and radiation efficiency plummet when their sizes become much smaller than the radiated wavelength. Recently, we demonstrated a new genre of unconventional extreme sub-wavelength nano-antennas that are several orders of magnitude smaller than the wavelength they radiate, and yet they radiate efficiently, beating the conventional Harrington limits on the gain and radiation efficiency by many orders of magnitude. This is made possible by their unique unconventional mechanism of activation. These nano-antennas are implemented with two dimensional periodic arrays of ~100 nm sized nanomagnets deposited on piezoelectric substrates. A surface acoustic wave (SAW) launched in the substrate excites resonant spin waves in the nanomagnets at discrete (GHz) frequencies via phonon-magnon coupling, which radiate electromagnetic waves very efficiently at those frequencies via magnon-photon coupling. Normally, one would expect such ultrasmall antennas to behave as point sources that radiate isotropically. Surprisingly, they do not because of the intrinsic anisotropy in the nanomagnet array. The radiation patterns in the plane of the nanomagnets and the two transverse planes are anisotropic. By changing the direction of SAW propagation in the plane of the nanomagnets, one can change the radiation patterns in all three planes, which heralds a new method of beam steering or active electronic scanning.
Wearable biosensors for continuous health monitoring, particularly those used for glucose detection, have a limited operational lifetime due to biodegradation and fouling. As a result, patients must change sensors frequently, increasing cost and patient discomfort. Arrays of multiple sensors, where the individual devices can be activated on demand, increase overall operational longevity, thereby reducing cost and improving patient outcomes. This work demonstrates the feasibility of this approach via decomposition of combustible nitrocellulose membranes that protect the individual sensors from exposure to bioanalytes using a current pulse. Metal contacts, connected by graphene-loaded PEDOT:PSS polymer on the surface of the membrane, deliver the required energy to decompose the membrane. Nitrocellulose membranes with a thickness of less than 1 µm consistently transfer on to polydimethylsiloxane (PDMS) wells. An electrical energy as low as 68 mJ has been shown to suffice for membrane decomposition.