Resin composites employing structural coloration have recently been developed. These resins match to various tooth shades despite being a single paste. To accomplish this, the filler and base resin are tightly bonded, which is thought to provide excellent discoloration resistance. Here, we investigated the surface properties of one of these resins, including the discoloration of the repolished surface. We developed an innovative in vitro method to adjust the repolished surface, in which structural degradation is removed according to scanning electron microscopy (SEM) observation rather than by the naked eye. The resin samples (20 mm (length) × 10 mm (width) × 4 mm (depth)) were manufactured using this resin material. After accelerated aging of the resin by alkaline degradation, the resin was repolished and the discoloration (ΔE*ab), surface roughness (the arithmetic mean roughness (Ra)), and glossiness (the 60° specular) were measured. SEM observation showed that the appearance of the bond between the organic composite filler and base resin on the repolished surface was different from that on the mirror-polished surface. This revealed that according to our in vitro method it was difficult to make the repolished surface structurally identical to the mirror-polished surface. Among the properties of the repolished surface, the degree of discoloration did not change despite the rougher and less glossy surface. It can be concluded that the factors that induce discoloration in this resin composite are independent of the surface roughness and glossiness.
This study aimed to clarify the effects of high-concentration fluoride varnish application on the inhibition of the progression of initial enamel caries. Remineralization capacity and acid resistance following high-concentration fluoride varnish application were compared with untreated models and models treated with fluoride mouthwash. Bovine enamel was used to create a model of initial enamel caries. The high-concentration fluoride varnishes Enamelast and Clinpro White Varnish and the fluoride mouthwash Miranol were used. Specimens were evaluated using Contact Microradiography (CMR) and an Electron Probe Micro-Analyzer (EPMA). While a single application of high-concentration fluoride varnish and short-term fluoride mouthwash use did not appear to cause remineralization in the subsurface demineralized layer, improvements in acid resistance were observed, leading to reduced demineralization under subsequent acidic challenges.