This study investigates the effect of polyvinylidene fluoride–CoFe2O4 (PVDF-CFO) composite film thickness on their supramolecular structure, phase composition, and dielectric properties. The composites were synthesized from PVDF with CFO nanoparticles using the Dr. Blade method to obtain film thicknesses ranging from 15 to 58 μm. The data obtained show that the thinner film (15 μm) has a higher β-phase content compared to the thicker films (58 μm), as confirmed by FTIR and Raman spectroscopy. Scanning electron microscopy (SEM) showed that increasing film thickness within the studied range leads to the development of larger spherulitic structures and increased porosity. Atomic force microscopy (AFM) analysis also showed that thicker films have higher tensile strength due to their larger cross-sectional area, while thinner films exhibit lower elasticity. A more uniform microstructure and an increased electroactive phase in thin films result in increased permittivity, which is critical for PVDF-based sensors and energy devices.
The phase transition in composites based on polyvinylidene fluoride and cobalt ferrite nanoparticles under uniaxial stretching at 100, 200, and 300% has been investigated. It was found that, when the composite is stretched at 300%, there is a maximum increase in the β-phase fraction: from 1% for the unstretched sample to 91%, while the fraction of the electrically active phase increases from 74 to 92%. It was also established that tensile stretching of the composites leads to an increase in the tensile strength: from 5.7 to 85.0 MPa. This tensile pattern also contributes to the increase in coercivity, which is due to the increase in the interparticle distance in the composite structure. These results emphasize the importance of the mechanical properties and phase changes in ferrite-containing polymer composites for their future applications.
1 April 2025 in Bulletin of the Russian Academy of Sciences: Physics
Results are presented from studying a nanocomposite made of polyvinylidene fluoride and cobalt ferrite nanoparticles coated with oleic acid. It is established that the nanocomposite has low porosity and a highly dispersed distribution of nanoparticles in the polymer matrix. An effect of 24.5 mV/(cm Oe), which is strong for a polymer-based magnetoelectric composite, is observed inside it. This makes the considered material promising for use in biomedical applications as a scaffold for cell stimulation.
In this paper, we have investigated piezoelectric, magnetic and magnetoelectric properties of composite materials, consisting of polyvinylidene fluoride (PVDF) matrix and CoFe 2 O 4 nanoparticles in the form of filament extrusion and 3D printed films. We used PVDF powders from different manufacturers each with different molecular weights and phase compositions. For PVDF with lower molecular weight and higher electroactive phase content of the, we observed that approximately 80 % of the electroactive phase in the starting polymer was effectively transferred to the printed films through all technological stages. The composite filaments exhibited ferromagnetic behavior with a large coercive force of 1.7±0.1 kOe consistent with a particle size of about 20 nm. The magnetoelectric coefficient was about 2 mV/(Oe∙cm) for printed composite films from both precursors, which is sufficient for a range of applications including microelectronics and tissue engineering using magnetically stimulated electric fields.
1 January 2026 in REVIEWS ON ADVANCED MATERIALS SCIENCE
This study systematically investigates how ligands on CoFe 2 O 4 nanoparticles control the magnetoelectric (ME) performance of poly(vinylidene fluoride) (PVDF)-based multiferroic composites and modulate the behavior of mesenchymal stem cells (MSCs) cultured on these surfaces. Particles bearing different organic coatings (polyethylene glycol, oleylamine, oleic acid, citric acid, and uncoated) were incorporated into a PVDF matrix and characterized by nanoparticle dispersion, interfacial coupling, bulk and local ME response, and magnetically mediated effects on adherent cells. Bulk ME coefficients ranged from 10 to 38 mV cm −1 Oe −1 for oleic acid- and oleylamine-coated particles, respectively, a variation attributable to differences in dispersion and polymer–filler coupling. Localized surface measurements revealed signals up to 6,000 mV cm −1 Oe −1 in oleic acid-containing films, consistent with nanoparticle aggregation and surface-localized piezoactive spherulites. Both oleylamine- and oleic acid-containing composites induced the formation of densely packed mesenchymal stem cell aggregates, morphologically resembling mesenchymal condensation under ME stimulation, but only the oleylamine-containing composite enhanced the density of adherent cells. These findings delineate coating-dependent mechanisms for tuning ME outputs and provide concrete design criteria for flexible biocompatible ME scaffolds.