As manufacturing technologies advance, the integration of artificial neural networks in machining high-hardness materials and optimization of multi-objective parameters is becoming increasingly prevalent. By employing modeling and optimization strategies during the machining of such materials, manufacturers can improve surface roughness and tool life while minimizing cutting time, tool vibrations, and cutting forces. In this paper, the aim was to analyze the impact of input parameters (cutting speed, feed rate, depth of cut, and insert radius) on surface roughness and cutting forces during the machining of 90MnCrV7 using feed-forward neural network models and SHAP analysis. Afterward, multi-criteria optimization was applied to determine the optimal parameter levels to achieve minimum surface roughness and cutting forces using the modified PSI-TOPSIS method. According to the SHAP analysis, the insert radius has the most significant impact on the surface roughness and passive force, while in the multi-criteria analysis, according to ANOVA results, the insert radius has the most significant impact on all considered outputs. The results show that an insert radius of 0.8 mm, a cutting speed of 260 m/min, a feed rate of 0.08 mm, and a depth of cut of 0.5 mm are the optimal combination of input parameters.

Self-excited vibrations represent one of the most unfavorable phenomena in the cutting process because they can lead to the accelerated wear or breakage of the tool, a sudden deterioration in the quality of the machined surface, and an increase in noise and energy consumption. To avoid these negative effects, stability diagrams are used when defining the cutting regimes, which, depending on the main spindle speed and the cutting depth, show the border between the stable and unstable machine tool operation states from the aspect of self-excited vibrations. These diagrams, known as “stability lobe diagrams”, can be defined using mathematical models (analytical or numerical) or through experimental methods. However, when machining at relatively low main spindle revolutions, process damping occurs, which increases the system stability, i.e., enables a greater cutting depth limit. For the stability diagram to be effectively used for predicting the cutting depth limits at low machining speeds, it is necessary to take the effect of process damping into account. This paper introduces an experimental method for the determination of process damping and its integration into the mathematical framework of the Fourier series method, commonly utilized for the construction of stability lobe diagrams.

Micro milling of metallic materials presents unique dynamic challenges due to highly nonlinear cutting forces and the susceptibility to self-excited vibrations (chatter). This paper presents a novel mathematical model for chatter prediction in micro milling, based on an enhanced formulation of cutting forces that includes the frictional interaction between the tool’s flank face and the machined surface. The proposed approach enables accurate simulation of the cutting process and prediction of the limiting depth of cut, beyond which chatter occurs. Experimental validation was performed using pneumatic spindle and micro end mills, with chatter detection based on surface inspection via digital microscopy. A strong correlation was observed between the simulated and experimentally determined limiting depths of cut, confirming the model’s predictive capability. This research offers a new methodology for modelling cutting forces and improves the ability to predict chatter in micro milling processes, contributing to the optimization of machining parameters across a wide range of materials.

This paper analyzes different approaches for the mathematical modeling and optimization of process parameters in the hard turning process of 42CrMo4 steel using a hybrid approach combining response surface methodology (RSM), multi-criteria decision making (MCDM), and machine learning through, support vector regression (SVR) with one-factor-at-a-time (OFAT) sensitivity analysis. Controlled process parameters such as cutting speed, depth of cut, feed, and insert radius are applied to conduct the experiments based on a full factorial experimental design. RSM was used to develop models that describe the effect of controlled parameters on surface roughness and cutting forces. Special emphasis was placed on the analysis of standardized residuals to evaluate the predictive capabilities of the RSM-developed model on an unseen data set. For all four outputs considered, analysis of the standardized residuals shows that over 97% of the points lie within ±3 standard deviations. A multi-criteria optimization technique was applied to establish an optimal combination of input parameters. The SVR model had high performance for all outputs, with coefficient of determination values between 89.91% and 99.39%, except for surface roughness on the test set, with a value of 9.92%. While the SVR model achieved high predictive accuracy for cutting forces, its limited generalization capability for surface roughness highlights the higher complexity and stochastic nature of surface formation mechanisms in the turning process. OFAT analysis showed that feed rate and depth of cut have been shown to be the most important input variables for all analyzed outputs.