Microneedles (MNs) represent the concept of attractive, minimally invasive puncture devices of micron-sized dimensions that penetrate the skin painlessly and thus facilitate the transdermal administration of a wide range of active substances. MNs have been manufactured by a variety of production technologies, from a range of materials, but most of these manufacturing methods are time-consuming and expensive for screening new designs and making any modifications. Additive manufacturing (AM) has become one of the most revolutionary tools in the pharmaceutical field, with its unique ability to manufacture personalized dosage forms and patient-specific medical devices such as MNs. This review aims to summarize various 3D printing technologies that can produce MNs from digital models in a single step, including a survey on their benefits and drawbacks. In addition, this paper highlights current research in the field of 3D printed MN-assisted transdermal drug delivery systems and analyzes parameters affecting the mechanical properties of 3D printed MNs. The current regulatory framework associated with 3D printed MNs as well as different methods for the analysis and evaluation of 3D printed MN properties are outlined.

The study’s primary purpose was to explore the abrasive water jet (AWJ) cut machinability of stainless steel X5CrNi18-10 (1.4301). The study analyzed the effects of such process parameters as the traverse speed (TS), the depth of cut (DC), and the abrasive mass flow rate (AR) on the surface roughness (Ra) concerning the thickness of the workpiece. Three different thicknesses were cut under different conditions; the Ra was measured at the top, in the middle, and the bottom of the cut. Experimental results were used in the developed feed-forward artificial neural network (ANN) to predict the Ra. The ANN’s model was validated using $k$-fold cross-validation. A lowest test root mean squared error (RMSE) of $0.2084$ was achieved. The results of the predicted Ra by the ANN model and the results of the experimental data were compared. Additionally, as TS and DC were recognized, analysis of variance at a $95$% confidence level was used to determine the most significant factors. Consequently, the ANN input parameters were modified, resulting in improved prediction; results show that the proposed model could be a useful tool for optimizing AWJ cut process parameters for predicting Ra. Its main advantage is the reduced time needed for experimentation.

Reinforcing the polymer with nanoparticles and fibers improves the mechanical, thermal and electrical properties. Owing to this, the functional parts produced by the FDM process of such materials can be used in industrial applications. However, optimal parameters’ selection is crucial to produce parts with optimal properties, such as mechanical strength. This paper focuses on the analysis of influential process parameters on the tensile strength of FDM printed parts. Two statistical methods, RSM and ANN, were applied to investigate the effect the layer thickness, printing speed, raster angle and wall thickness on the tensile strength of test specimens printed with a short carbon fiber reinforced polyamide composite. The reduced cubic model was developed by the RSM method, and the correlation between the input parameters and the output response was analyzed by ANOVA. The results show that the layer thickness and raster angle have the most significant influence on tensile strength. As for machine learning, among the nine different tested ANN topologies, the best configuration was found based on the lowest MAE and MSE test sample result. The results show that the proposed model could be a useful tool for predicting tensile strength. Its main advantage is the reduction in time needed for experiments with the LOSO (leave one subject out) k-fold cross validation scheme, offering better generalization ability, given the small set of learning examples.

As manufacturing technologies advance, the integration of artificial neural networks in machining high-hardness materials and optimization of multi-objective parameters is becoming increasingly prevalent. By employing modeling and optimization strategies during the machining of such materials, manufacturers can improve surface roughness and tool life while minimizing cutting time, tool vibrations, and cutting forces. In this paper, the aim was to analyze the impact of input parameters (cutting speed, feed rate, depth of cut, and insert radius) on surface roughness and cutting forces during the machining of 90MnCrV7 using feed-forward neural network models and SHAP analysis. Afterward, multi-criteria optimization was applied to determine the optimal parameter levels to achieve minimum surface roughness and cutting forces using the modified PSI-TOPSIS method. According to the SHAP analysis, the insert radius has the most significant impact on the surface roughness and passive force, while in the multi-criteria analysis, according to ANOVA results, the insert radius has the most significant impact on all considered outputs. The results show that an insert radius of 0.8 mm, a cutting speed of 260 m/min, a feed rate of 0.08 mm, and a depth of cut of 0.5 mm are the optimal combination of input parameters.

The application of additive manufacturing technologies for producing parts from polymer composite materials has gained significant attention due to the ability to create fully functional components that leverage the advantages of both polymer matrices and fiber reinforcements while maintaining the benefits of additive technology. Polymer composites are among the most advanced and widely used composite materials, offering high strength and stiffness with low mass and variable resistance to different media. This study aims to experimentally investigate the impact of selected process parameters, namely, wall thickness, raster angle, printing temperature, and build plate temperature, on the flexural properties of carbon fiber reinforced polyamide (CFrPA) fused deposition modeling (FDM) printed samples, as per ISO 178 standards. Additionally, regression and artificial neural network (ANN) models have been developed to predict these flexural properties. ANN models are developed for both normal and augmented inputs, with the architecture and hyperparameters optimized using random search technique. Response surface methodology (RSM), which is based on face centered composite design, is employed to analyze the effects of process parameters. The RSM results indicate that the raster angle and build plate temperature have the greatest impact on the flexural properties, resulting in an increase of 51% in the flexural modulus. The performance metrics of the optimized RSM and ANN models, characterized by low MSE, RMSE, MAE, and MAPE values and high R² values, suggest that these models provide highly accurate and reliable predictions of flexural strength and modulus for the CFrPA material. The study revealed that ANN models with augmented inputs outperform both RSM models and ANN models with normal inputs in predicting these properties.