Kenan Muhamedagic

Prof. Kenan Muhamedagic

Faculty of Mechanical Engineering - Department of Machinery Production Engineering
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 October 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
Amina Tucak SmajicAmina Tucak Smajic
Amina Tucak Smajic
Merima SirbubaloMerima Sirbubalo
Merima Sirbubalo
LHLamija Hindija
Lamija Hindija
Ognjenka RahicOgnjenka Rahic
Ognjenka Rahic
JHJasmina Hadžiabdić
Jasmina Hadžiabdić
Edina VranićEdina Vranić
Edina Vranić
Although transdermal drug delivery systems (DDS) offer numerous benefits for patients, including the avoidance of both gastric irritation and first-pass metabolism effect, as well as improved patient compliance, only a limited number of active pharmaceutical ingredients (APIs) can be delivered accordingly. Microneedles (MNs) represent one of the most promising concepts for effective transdermal drug delivery that penetrate the protective skin barrier in a minimally invasive and painless manner. The first MNs were produced in the 90s, and since then, this field has been continually evolving. Therefore, different manufacturing methods, not only for MNs but also MN molds, are introduced, which allows for the cost-effective production of MNs for drug and vaccine delivery and even diagnostic/monitoring purposes. The focus of this review is to give a brief overview of MN characteristics, material composition, as well as the production and commercial development of MN-based systems.

22 June 2021 in Pharmaceutics
Verified
Journal Article
Open access
PDF file
Merima SirbubaloMerima Sirbubalo
Merima Sirbubalo
Amina Tucak SmajicAmina Tucak Smajic
Amina Tucak Smajic
KMKenan Muhamedagic
Kenan Muhamedagic
LHLamija Hindija
Lamija Hindija
Ognjenka RahicOgnjenka Rahic
Ognjenka Rahic
Edina VranićEdina Vranić
Edina Vranić
Microneedles (MNs) represent the concept of attractive, minimally invasive puncture devices of micron-sized dimensions that penetrate the skin painlessly and thus facilitate the transdermal administration of a wide range of active substances. MNs have been manufactured by a variety of production technologies, from a range of materials, but most of these manufacturing methods are time-consuming and expensive for screening new designs and making any modifications. Additive manufacturing (AM) has become one of the most revolutionary tools in the pharmaceutical field, with its unique ability to manufacture personalized dosage forms and patient-specific medical devices such as MNs. This review aims to summarize various 3D printing technologies that can produce MNs from digital models in a single step, including a survey on their benefits and drawbacks. In addition, this paper highlights current research in the field of 3D printed MN-assisted transdermal drug delivery systems and analyzes parameters affecting the mechanical properties of 3D printed MNs. The current regulatory framework associated with 3D printed MNs as well as different methods for the analysis and evaluation of 3D printed MN properties are outlined.

14 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KMKenan Muhamedagic
Kenan Muhamedagic
LBLucijano Berus
Lucijano Berus
DPDavid Potočnik
David Potočnik
ACAhmet Cekic
Ahmet Cekic
DBDerzija Begic-Hajdarevic
Derzija Begic-Hajdarevic
Mirko FickoMirko Ficko
Mirko Ficko
Reinforcing the polymer with nanoparticles and fibers improves the mechanical, thermal and electrical properties. Owing to this, the functional parts produced by the FDM process of such materials can be used in industrial applications. However, optimal parameters’ selection is crucial to produce parts with optimal properties, such as mechanical strength. This paper focuses on the analysis of influential process parameters on the tensile strength of FDM printed parts. Two statistical methods, RSM and ANN, were applied to investigate the effect the layer thickness, printing speed, raster angle and wall thickness on the tensile strength of test specimens printed with a short carbon fiber reinforced polyamide composite. The reduced cubic model was developed by the RSM method, and the correlation between the input parameters and the output response was analyzed by ANOVA. The results show that the layer thickness and raster angle have the most significant influence on tensile strength. As for machine learning, among the nine different tested ANN topologies, the best configuration was found based on the lowest MAE and MSE test sample result. The results show that the proposed model could be a useful tool for predicting tensile strength. Its main advantage is the reduction in time needed for experiments with the LOSO (leave one subject out) k-fold cross validation scheme, offering better generalization ability, given the small set of learning examples.

6 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MPMirza Pasic
Mirza Pasic
DMDejan Marinkovic
Dejan Marinkovic
Dejan LukićDejan Lukić
Dejan Lukić
DBDerzija Begic-Hajdarevic
Derzija Begic-Hajdarevic
AZAleksandar M. Zivkovic
Aleksandar M. Zivkovic
KMKenan Muhamedagic
Kenan Muhamedagic
As manufacturing technologies advance, the integration of artificial neural networks in machining high-hardness materials and optimization of multi-objective parameters is becoming increasingly prevalent. By employing modeling and optimization strategies during the machining of such materials, manufacturers can improve surface roughness and tool life while minimizing cutting time, tool vibrations, and cutting forces. In this paper, the aim was to analyze the impact of input parameters (cutting speed, feed rate, depth of cut, and insert radius) on surface roughness and cutting forces during the machining of 90MnCrV7 using feed-forward neural network models and SHAP analysis. Afterward, multi-criteria optimization was applied to determine the optimal parameter levels to achieve minimum surface roughness and cutting forces using the modified PSI-TOPSIS method. According to the SHAP analysis, the insert radius has the most significant impact on the surface roughness and passive force, while in the multi-criteria analysis, according to ANOVA results, the insert radius has the most significant impact on all considered outputs. The results show that an insert radius of 0.8 mm, a cutting speed of 260 m/min, a feed rate of 0.08 mm, and a depth of cut of 0.5 mm are the optimal combination of input parameters.

19 May 2025 in PLOS ONE
Verified
Journal Article
Open access
PDF file
AAAbdulsalam Abdulaziz Al-Tamimi
Abdulsalam Abdulaziz Al-Tamimi
KMKenan Muhamedagic
Kenan Muhamedagic
DBDerzija Begic-Hajdarevic
Derzija Begic-Hajdarevic
AVAjdin Vatres
Ajdin Vatres
EKEdin Kadric
Edin Kadric
The application of additive manufacturing technologies for producing parts from polymer composite materials has gained significant attention due to the ability to create fully functional components that leverage the advantages of both polymer matrices and fiber reinforcements while maintaining the benefits of additive technology. Polymer composites are among the most advanced and widely used composite materials, offering high strength and stiffness with low mass and variable resistance to different media. This study aims to experimentally investigate the impact of selected process parameters, namely, wall thickness, raster angle, printing temperature, and build plate temperature, on the flexural properties of carbon fiber reinforced polyamide (CFrPA) fused deposition modeling (FDM) printed samples, as per ISO 178 standards. Additionally, regression and artificial neural network (ANN) models have been developed to predict these flexural properties. ANN models are developed for both normal and augmented inputs, with the architecture and hyperparameters optimized using random search technique. Response surface methodology (RSM), which is based on face centered composite design, is employed to analyze the effects of process parameters. The RSM results indicate that the raster angle and build plate temperature have the greatest impact on the flexural properties, resulting in an increase of 51% in the flexural modulus. The performance metrics of the optimized RSM and ANN models, characterized by low MSE, RMSE, MAE, and MAPE values and high R2 values, suggest that these models provide highly accurate and reliable predictions of flexural strength and modulus for the CFrPA material. The study revealed that ANN models with augmented inputs outperform both RSM models and ANN models with normal inputs in predicting these properties.

1 January 2019
Verified
Book Chapter
Closed access
ACAhmet Cekic
Ahmet Cekic
DBDerzija Begic-Hajdarevic
Derzija Begic-Hajdarevic
MHMaida Cohodar Husic
Maida Cohodar Husic
KMKenan Muhamedagic
Kenan Muhamedagic
MOMaida Osmanlic
Maida Osmanlic