Alejandro Rodriguez Barroso

Alejandro Rodriguez Barroso

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2019 in Sensors
Verified
Journal Article
Open access
PDF file
Juan S. CelyJuan S. Cely
Juan S. Cely
Roque SaltarenRoque Saltaren
Roque Saltaren
GPGERARDO PORTILLA
GERARDO PORTILLA
Oz YakrangiOz Yakrangi
Oz Yakrangi
ABAlejandro Rodriguez Barroso
Alejandro Rodriguez Barroso
Hydrodynamic coefficients are essential for the development of underwater robots; in particular, for their design and navigation control. To obtain these coefficients, several techniques exist. These methods are usually experimental, but, more recently, some have been designed by a combination of experiments with computational methods based on Computational Fluid Dynamics (CFD). One method for obtaining the hydrodynamic coefficients of an ROV (Remote Operated Vehicle) is by using an experimental PMM (Planar Motion Mechanism) or CWC (Circular Water Channel); however, the use of these experimental infrastructures is costly. Therefore, it is of interest to obtain these coefficients in other ways, for example, by the use of simple experiments. The Free Decay Test is an ideal type of experiment, as it has a low cost and is simple to implement. In this paper, two different free decay tests were carried out, to which three different methods for obtaining coefficients were applied. They were compared with results obtained by CFD simulation to conduct a statistical analysis in order to determine their behaviours. It was possible to obtain values of the drag and added mass coefficients for the models analysed, where the values were obtained for an Underwater Drone Robot (UDrobot).

22 August 2018 in Sensors
Verified
Journal Article
Open access
PDF file
ABAlejandro Rodriguez Barroso
Alejandro Rodriguez Barroso
Roque SaltarenRoque Saltaren
Roque Saltaren
GPGERARDO PORTILLA
GERARDO PORTILLA
Juan S. CelyJuan S. Cely
Juan S. Cely
MAMarco Alexander Carpio Alemán
Marco Alexander Carpio Alemán
Redundancy in cable-driven parallel robots provides additional degrees of freedom that can be used to achieve different objectives. In this robot, this degree of freedom is used to act on a reconfigurable end effector with one degree of freedom. A compliant actuator actuated by one motor exerts force on both bodies of the platform. Due to the high tension that appears in this cable in comparison with the rest of the cables, an elastic model was developed for solving the kinestostatic and wrench analysis. A linear sensor was used in one branch of this cable mechanism to provide the needed intermediate values. The position of one link of the platform was fixed in order to focus this analysis on the relationship between the cables and the platform’s internal movement. Position values of the reconfigurable end effector were calculated and measured as well as the tension at different regions of the compliant actuator. The theoretical values were compared with dynamic simulations and real prototype results.

21 February 2023 in Physical Review Applied
Verified
Journal Article
Closed access
PDF file
GCGuillermo Camacho
Guillermo Camacho
ABAlejandro Rodriguez Barroso
Alejandro Rodriguez Barroso
OMOscar Martinez-Cano
Oscar Martinez-Cano
JMJose R. Morillas
Jose R. Morillas
PTPietro Tierno
Pietro Tierno
Juan de VicenteJuan de Vicente
Juan de Vicente
Shear thinning fluids represent a class of non-Newtonian media characterized by a decrease of the apparent viscosity when increasing the shear rate. Here we experimentally demonstrate a deterministic ratchet effect in such media that enables directed transport of microscopic particles under a square-wave magnetic force. The applied modulation is designed in such a way that it does not produce any average speed when the particles are dispersed in a Newtonian fluid (e.g., water). However, in a dilute biopolymer solution, we observe the emergence of a net colloidal current when the forcing wave is composed of different amplitudes and time durations within a single period. The shear thinning nature of the dispersing medium nonlinearly raises the mean speed for strong forces, breaking the spatial symmetry of the particle displacement and generating a net colloidal transport. We complement our findings with numerical simulations that capture well the underlying physical mechanism, showing good agreement with the experimental results. Our technique to ratchet magnetic particles could be potentially extended in active microrheology to probe other non-Newtonian, complex fluids and to infer the nonlinear properties of viscoelastic materials.

17 August 2019 in Sensors
Verified
Journal Article
Open access
PDF file
GPGERARDO PORTILLA
GERARDO PORTILLA
RSRoque Saltarén
Roque Saltarén
FEFrancisco Montero de Espinosa
Francisco Montero de Espinosa
ABAlejandro Rodriguez Barroso
Alejandro Rodriguez Barroso
Juan S. CelyJuan S. Cely
Juan S. Cely
Oz YakrangiOz Yakrangi
Oz Yakrangi
In this research, the dynamic walking of a legged robot in underwater environments is proposed. For this goal, the underwater zero moment point (Uzmp) is proposed in order to generate the trajectory of the centre of the mass of the robot. Also, the underwater zero moment point auxiliary (Uzmp aux.) is employed to stabilize the balance of the robot before it undergoes any external perturbations. The concept demonstration of a legged robot with hydraulic actuators is developed. Moreover, the control that was used is described and the hydrodynamic variables of the robot are determined. The results demonstrate the validity of the concepts that are proposed in this article, and the dynamic walking of the legged robot in an underwater environment is successfully demonstrated.

19 July 2019 in Robotics
Verified
Journal Article
Open access
PDF file
MAMarco Alexander Carpio Alemán
Marco Alexander Carpio Alemán
Roque SaltarenRoque Saltaren
Roque Saltaren
ABAlejandro Rodriguez Barroso
Alejandro Rodriguez Barroso
GPGERARDO PORTILLA
GERARDO PORTILLA
JPJuan Diego Placencia
Juan Diego Placencia
Cable-Driven Parallel Robots (CDPR) operate over a large positional workspace and a relatively large orientation workspace. In the present work, the expansion of the orientation Wrench Feasible Workspace (WFW) in a planar four-cable passive reconfigurable parallel robot with three degrees of freedom was determined. To this end, we proposed a circular-geometry effector mechanism, whose structure allows automatic mobility of the two anchor points of the cables supporting the End Effector (EE). The WFW of the proposed circular structure robot was compared with that of a traditional robot with a rectangular geometry and fixed anchor points. Considering the feasible geometric and tension forces on the cables, the generated workspace volume of the robot was demonstrated in an analysis-by-intervals. The results were validated by simulating the orientation movements of the robot in ADAMS software and a real experimental test was developed for a hypothetical case. The proposed design significantly expanded the orientation workspace of the robot. The remaining limitation is the segment of the travel space in which the mobile connection points can slide. Overcoming this limitation would enable the maximum rotation of the EE.

19 February 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Oz YakrangiOz Yakrangi
Oz Yakrangi
Roque SaltarenRoque Saltaren
Roque Saltaren
Juan S. CelyJuan S. Cely
Juan S. Cely
ABAlejandro Rodriguez Barroso
Alejandro Rodriguez Barroso
Cecilia Elisabet Garcia CenaCecilia Elisabet Garcia Cena
Cecilia Elisabet Garcia Cena
ASAmir Shapiro
Amir Shapiro
The aim of this article is to present the fuzzy Petri net algorithm and its implementation on the Guide d’etude des modes de marche et d’arrêt (GEMMA) guide paradigm. Additionally, this article presents a brief description of the GEMMA guide paradigm, the fuzzy logic approach, the Petri nets theory, and fuzzy Petri nets. Each algorithm is intended for a specific set of transitions, depending on their essential conditions. All these algorithms generate intelligent and safe control of the GEMMA guide paradigm in order to have the best control system for the machine. Moreover, the algorithms are able to make the best decision automatically depending on the machine’s situation and condition, something that allows the machine to be placed in the appropriate mode for each situation. The results show that the different fuzzy Petri net algorithms were working properly for the GEMMA guide paradigm and provided a proper solution for the automation of production systems.