LEDs (Light-Emitting Diodes) are widely applied not only in decorative illumination but also in everyday lighting in buildings, flats, public areas, and automotive fields. These application areas often mean harsh environments, for example, regarding the humidity content of the surrounding air: besides outdoor and automotive illumination, even the household use cases (kitchen, bathroom, cellar) may represent extreme temperature and humidity variations (often reaching relative humidity levels close to 100%) for these devices; thus, their reliability behaviour in such circumstances should be better understood. Thermally activated processes were studied in several previous publications, but less information is available regarding high-humidity environmental tests. Moisture and temperature ageing tests with appropriate environmental parameter settings were performed as accelerated lifetime tests to investigate not only the effect of temperature but also that of humidity on the ageing and reliability of LED packages containing RGB (red green blue) chips and phosphor-converted white (pcW) LEDs. The ageing was followed not only through monitoring optical/electrical/spectral parameters but also with material analysis. Moisture–material interaction models were proposed and set up. It was found that humidity-accelerated ageing processes are more severe than expected from previous assumptions. RGB and pcW LEDs showed strongly different behaviour.
19 May 2023 in IEEE Transactions on Components, Packaging and Manufacturing Technology
The ability to dim LEDs is a big advantage compared to previous light sources, but it can also lead to new aging mechanisms. Due to the different coefficients of thermal expansion of the individual structural layers, the temperature cycle can negatively affect the main thermal path. In this article, we investigate how different dimming frequencies influence the aging of LEDs and to what extent they impair the thermal conductivity of structural layers belonging to different thermal time constants. In this paper the methodology of the joint examination of the integral structure function and the time constant spectrum is described, i.e. the determination of the time constants and the frequency values that expose the individual structural layers to the most mechanical stress. The theoretical results are demonstrated using an LM-80 based LED lifetime test supplemented with thermal transient testing which is also presented in this paper.
In this paper, a novel method is presented to estimate the parameters of the SPICE-like multi-domain model of light-emitting diode (LED) chips developed and proposed by the Delphi4LED project. The proposed estimation algorithm employs a modified Nelder-Mead method, as the gradient methods and the original version of Nelder-Mead fail to properly handle this problem. By using the new, modified Nelder-Mead method presented in this paper the parameters are estimated faster, compared to the previously used brute-force algorithm-based parameter extraction process, allowing the same precision of the SPICE-like multi-domain LED model. The modification of the parameter extraction procedure also allows speeding up and simplifying the multi-domain LED characterization method proposed earlier by the Delphi4LED project. The speed and robustness of the new model eliminate the need for time-consuming junction temperature control during measurements by employing a novel extraction strategy that seeks the global minimum, rather than relying on the composition of marginal minima.
In this article, thermal investigation methods for electrically insulating and thermally conductive substrate materials will be presented. The investigations were performed in their real-world application environment, i.e., in the form of IGBT (insulated gate bipolar transistor) module substrate plates. First, the overall thermal resistance and thermal structure function of the system in a multivariable parameter space were revealed using CFD (computational fluid dynamics) simulations. Afterwards, thermal transient testing was performed on real samples, with the help of which the thermal resistance values of the modules were determined using the thermal dual interface test method. The presented tests are not intended to determine material parameters, but to rank different substrate materials based on their thermal performance.
In this paper, a detailed description of the mid-power LED aging experiment carried out within the AI-TWILIGHT H2020 ECSEL project shall be provided. This was a mitigation action, called the JointLab project to provide detailed LED aging data to allow the creation of even LED-age dependent multi-domain models with the timeframe of the 3 years of AI-TWILIGHT. This was an extended LM-80 test with the collaboration of the laboratories of three academic partners, during which a large space of stress conditions applied during the aging process was covered and a set of measurements more detailed than usual in a standard LM-80 lifetime test had been performed at the predetermined intervals, more frequently than in most LM-80 tests. The goal was to create a so-called multi-domain circuit simulation model that could also describe the effect of LED aging as a function of the elapsed operating time and operating conditions.