Lirong Guo

Dr. Lirong Guo

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 November 2017 in Vehicle System Dynamics
Verified
Journal Article
Closed access
LGLirong Guo
Lirong Guo
KWKaiyun Wang
Kaiyun Wang
ZCZaigang Chen
Zaigang Chen
ZSZhiyong Shi
Zhiyong Shi
KLKaikai Lv
Kaikai Lv
TJTiancheng Ji
Tiancheng Ji
This paper aims to improve car body stability performance by optimising locomotive parameters when coupler jack-knifing occurs during braking. In order to prevent car body instability behaviour caused by coupler jack-knifing, a multi-locomotive simulation model and a series of field braking tests are developed to analyse the influence of the secondary suspension and the secondary lateral stopper on the car body stability performance during braking. According to simulation and test results, increasing secondary lateral stiffness contributes to limit car body yaw angle during braking. However, it seriously affects the dynamic performance of the locomotive. For the secondary lateral stopper, its lateral stiffness and free clearance have a significant influence on improving the car body stability capacity, and have less effect on the dynamic performance of the locomotive. An optimised measure was proposed and adopted on the test locomotive. For the optimised locomotive, the lateral stiffness of secondary lateral stopper is increased to 7875 kN/m, while its free clearance is decreased to 10 mm. The optimised locomotive has excellent dynamic and safety performance. Comparing with the original locomotive, the maximum car body yaw angle and coupler rotation angle of the optimised locomotive were reduced by 59.25% and 53.19%, respectively, according to the practical application. The maximum derailment coefficient was 0.32, and the maximum wheelset lateral force was 39.5 kN. Hence, reasonable parameters of secondary lateral stopper can improve the car body stability capacity and the running safety of the heavy haul locomotive.

19 November 2020 in Vehicle System Dynamics
Verified
Journal Article
Closed access
XGXin Ge
Xin Ge
LLLiang Ling
Liang Ling
LGLirong Guo
Lirong Guo
ZSZhiyong Shi
Zhiyong Shi
KWKaiyun Wang
Kaiyun Wang
Turnouts are among the weakest links of railway lines, but the derailment risk of vehicles passing the through route of a turnout is seldom considered. The potential factors affecting derailment are screened according to field investigations of a train derailment case at the through route of a turnout. A detailed wagon-turnout interaction model considering the non-uniform cross-sections of turnout rails and the interaction between adjacent wagons is developed and validated. Through numerical simulation, the dynamic performance of an empty wagon passing the through route of turnout at a low speed is studied. When the wagon passes the turnout under the continuous lateral force condition, the wheels climb onto the rail head at the switch area in the facing direction, while the derailment occurs at the frog area in the trailing direction. Moreover, the possibility of derailment of the empty wagon increases with increasing coupler force and wheel-rail friction coefficient, and with decreasing speed. To improve the safety of empty wagons in the turnout area, rail lubrication should be implemented to reduce the wheel-rail friction coefficient, and large braking forces should be avoided. Furthermore, the wheel surface condition after re-profiling requires continuous attention.

31 October 2017 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Verified
Journal Article
Closed access
LGLirong Guo
Lirong Guo
KWKaiyun Wang
Kaiyun Wang
Coupler jackknifing has caused a number of derailments, and it is a significant topic that needs in-depth studies. This paper aims to investigate the characteristics of coupler jackknifing and its effects on the dynamic performance of locomotives during braking. A field braking experiment using three eight-axle locomotives was conducted on a tangent track. The experimental results indicated that in-service couplers with a friction arc surface are prone to coupler jackknifing once the compressive force of the coupler exceeds 400 kN. After coupler jackknifing, the coupler angle has a significant positive correlation with the yaw angle of the car body; both coupler jackknifing and coupler angle increase rapidly to maximum values. The contact between the car body and the bogie seriously affects the dynamic performance of the locomotive and causes lateral instability of the locomotive. In particular, the lateral deviation of the coupling couplers generates an eccentric wear on the tail of the coupler. A numerical simulation model is developed to investigate the effect of coupler jackknifing on the running safety of the locomotive. Simulation results show that coupler jackknifing induces an excessive lateral force on the wheelset and increases the risk of derailments and gauge widening. Compared with the existing measures against coupler jackknifing, in this study, an effectively active measure is proposed to improve the stability of the coupler and to prevent possible derailments caused by coupler jackknifing during braking.

11 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
ATAiqin Tian
Aiqin Tian
KSKang Sun
Kang Sun
QCQuanwei Che
Quanwei Che
BJBeichen Jiang
Beichen Jiang
XSXiangang Song
Xiangang Song
SXShoune Xiao
Shoune Xiao
The continuous increase in the operating speed of rail vehicles demands higher requirements for passive safety protection and lightweight design. This paper focuses on an energy-absorbing component (circular tubes) at the end of a train. Thin-walled carbon fiber-reinforced polymer (CFRP) tubes were prepared using the filament winding process. Through a combination of sled impact tests and finite element simulations, the effects of a chamfered trigger (Tube I) and embedded trigger (Tube II) on the impact response and crashworthiness of the structure were investigated. The results showed that both triggering methods led to the progressive end failure of the tubes. Tube I exhibited a mean crush force (MCF) of 891.89 kN and specific energy absorption (SEA) of 38.69 kJ/kg. In comparison, the MCF and SEA of Tube II decreased by 21.2% and 21.9%, respectively. The reason for this reduction is that the presence of the embedded trigger in Tube II restricts the expansion of the inner plies (plies 4 to 6), thereby affecting the overall energy absorption mechanism. Based on the validated finite element model, a modeling strategy study was conducted, including the failure parameters (DFAILT/DFAILC), the friction coefficient, and the interfacial strength. It was found that the prediction results are significantly influenced by modeling methods. Specifically, as the interfacial strength decreases, the tube wall is more prone to circumferential cracking or overall buckling under axial impact.

26 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LGLirong Guo
Lirong Guo
JZJingke Zhang
Jingke Zhang
Tao ZhuTao Zhu
Tao Zhu
SXShoune Xiao
Shoune Xiao
LYLiu Yanwen
Liu Yanwen
BLBenhuai Li
Benhuai Li
Orderly and controllable dissipation of impact kinetic energy is the key to ensuring train collision safety in different collision scenarios. Therefore, it is necessary to analyze the change rule of collision energy dissipation under different collision scenarios and design the parameters of the energy-absorbing structure to meet the demand for collision energy dissipation. Four representative train collision scenarios are formulated based on train collision accidents, and the concept of energy dissipation rate is proposed to characterize the drastic degree of collision energy change under different collision scenarios. Based on the train longitudinal collision dynamics model verified by the line collision test of the train, the effects of varying collision scenarios on the energy dissipation rate, energy absorption and maximum average acceleration of train collision are studied. The study results show that the longitudinal collision dynamics model of the train established in this paper can better characterize the dynamic response of the vehicle by comparing it with the results of the line collision test. The maximum difference in the speed of each vehicle after the collision is 4.91%. The differences in the energy dissipation process, interface energy absorption and maximum average acceleration are minor in four collision scenarios, including a moving train hitting a stationary train, rear-end train collision and head-on train collision. The maximum difference in energy absorbed at the interface for head-on collision is 1.54%. The initial and residual collision kinetic energy is greater in the train rear-end collision scenario, and the train rear-end collision scenario should be considered when evaluating the train’s lateral instability and vertical climbing behavior.