We propose a power and data transfer network on a conductive fabric material based on an existing serial communication protocol, Inter-Integrated Circuit (I $^2$ C). We call the proposed network inter-IC for wearables (I $^2$ We). Continuous dc power and I $^2$ C-formatted data are simultaneously transferred to tiny sensor nodes distributed on a double-sided conductive textile. The textile comprises two conductive sides, isolated from each other, and is used as a single planar transmission line. I $^2$ C data are transferred along with dc power supply based on frequency division multiplexing. Two carriers are modulated with the clock and the data signals of I $^2$ C. A modulation and demodulation circuit is designed such that off-the-shelf I $^2$ C-interfaced sensor ICs can be used. The novelty of this work is that a special filter to enable passive modulation is designed by locating its impedance poles and zeros at the appropriate frequencies. The term ``passive modulation'' herein implies that the sensor nodes do not generate carrier waves by themselves; instead, they reflect only the externally supplied careers for modulation. The proposed scheme enables the flexible implementation of wearable sensor systems in which multiple off-the-shelf tiny sensors are distributed throughout the system.
A compact configuration of a 2.45-GHz microwave to dc power conversion circuit realizing a class-F operation is proposed. In the ideal class-F operation, harmonic power dissipations are eliminated by open and short terminations for the odd and the even harmonics, respectively. The proposed antisymmetric configuration of two single-shunt-diode rectifiers do not need explicit filters for the even harmonics. A design example that contains an impedance matching network at the fundamental frequency and a third-harmonic rejection filter is presented. Simulation results show that it also realizes approximately short terminations for the second and the fourth harmonics. A fabricated circuit achieved 77.9% RF-dc conversion efficiency when 27-dBm power of 2.45-GHz microwave was supplied.
We propose a powering scheme for tiny wearable devices attached on a cloth without individual one-to-one wires. Devices with a special connector consisting of a tack and a clutch are stuck through a special cloth embroidered with conductive threads. Physical mounting of the devices and electrical connection are integrated into a single action, i.e., just sticking the connector. Combining microwave/high-frequency circuit technology and recent highly conductive soft fabric materials opens up a new implementation scheme for wearable sensing/display/communication systems.
We propose a simplex version of Inter-IC for Wearables (I 2 We), which enables the simultaneous transfer of Inter-Integrated Circuit (I 2 2C)-formatted serial bitstream and dc power over a single transmission line consisting of a pair of conductive textiles. In a previous study, a half-duplex I 2 We (HD-I 2 We) was proposed for power and data transfer among microcontrollers and sensors distributed on a relatively small piece of conductive textile. The passive modulation operation of HD-I 2 We was implemented in a small footprint by designing a special filter. However, to extend the conductive textile area to cover the human body as clothing does, the filter design requires unrealistically low-loss circuit components. Simplex I 2 We (S-I 2 We) does not require these unrealistic components. This paper also presents demonstration systems in which LEDs and actuators are attached to jackets composed of conductive textiles. The proposed S-I 2 We will enable the implementation of wearable and flexible sensor/actuator systems in the form of daily wear.
Wireless body networks comprising battery-free on-body sensors and textile-based wireless readers can enable daily health monitoring and activity tracking by continuously monitoring physiological signals across the body. However, previous textile-based wireless networks made of coils or antennas have limited the data and power transmission area because covering the whole body results in undesirable levels of electromagnetic interactions with the body, degrading the scalability, power consumption, and data rate. Here, we report Full-body NFC, digitally-knitted electronic textiles based on a twin meander coil design that enables body-scale near-field communication (NFC) with battery-free sensor tags arbitrarily placed around the body. Full-body NFC features i) a meander coil that enhances the magnetic field intensity on the body's surface while suppressing undesired interactions with deep tissues, in addition to ii) paired identical coil structure that enables highly-sensitive and motion-robust NFC using a differential architecture. Additionally, industrial digital knitting machines loaded with conductive yarn allow the integration of the Full-body NFC system into daily garments supporting approximately $70-80\%$ large-scale NFC-enabled area of the body. We demonstrate Full-body NFC could achieve mW-class energy-efficient near-field sensor networks with hundreds of kbps-class NFC battery-free sensor tags occupying less than $0.3\%$ of the coverage area under severe body movements.