We present a new type of fiber Mach–Zehnder interferometer based on a fiber taper and a pair of inner air bubbles for highly sensitive ethanol concentration measurement. The experimental results show there is a nonlinear relationship between the wavelength shift of the dip located near 1485 nm and the ethanol concentration but in the concentration range from 0.3 to 0.7 it can be seen as a linear response with a sensitivity of 28 nm/vol.
In recent years, the transition metal carbonitrides(MXenes) have been widely applied to photoelectric field, and better performance of these applications was achieved via MXene complex structures. In our work, we proposed a MXene core-shell nanosheet composed of a Ti2C (MXene) phase and gold nanoparticles, and applied it to mode-locked and single-frequency fiber laser applications. The optoelectronic results suggested that the performances of these two applications were both improved when MXene core-shell nanosheets were applied. As a result, we obtained a mode-locking operation with 670 fs pulses, and the threshold pump power reached to as low as 20 mW. Besides, a single-frequency laser with the narrowest linewidth of ~1 kHz is also demonstrated experimentally. Our research work proved that MXene core-shell nanosheets could be used as saturable absorbers (SAs) to promote versatile photonic applications.
This paper introduces a mode-hop-free switchable single-dual-frequency fiber laser based on Ti2C MXene quantum dots and a phase-shifted fiber Bragg grating that exhibits two single-frequency operating states and one dual-frequency operating state for the first time. In our experiments, this laser has a threshold as low as 6 mW, a narrowest linewidth of 473.5 Hz, a relative intensity noise of −101.5 dB/Hz, an optical signal-to-noise ratio over 83 dB, and a slope efficiency that reaches 2.2% as a single-frequency fiber laser. Compared with other congeneric lasers, it has the best performance in terms of the threshold and signal to noise ratio. An easily detectable beat frequency of 122 MHz was measured when the laser was switched to be a dual-frequency fiber laser. This switchable single-dual-frequency fiber laser has the potential to be applied as a Lidar source for the measurement of static targets and moving subjects.
Dual-frequency lasers with narrow linewidth and high coherence serve as essential light sources for systems such as heterodyne detection, LiDAR, and precision interferometry. However, existing technologies cannot directly separate the two frequency components at MHz-scale differences, which remains a persistent bottleneck in this field. In this paper, we present a dual-frequency fiber laser based on a bidirectional dual-path ring cavity. The proposed laser supports flexible switching between single-frequency and dual-frequency operation while allowing straightforward physical separation of the two outputs via intrinsic beam routing. In single-frequency mode, the two beams exhibit Lorentzian linewidths of 1.1 kHz and 1.16 kHz, respectively. In dual-frequency operation, the laser produces a beat signal at 470 MHz with a 3-dB linewidth of 340.2 Hz and a signal-to-noise ratio (SNR) exceeding 70 dB. This dual-frequency fiber laser provides a novel and practical source for heterodyne detection and LiDAR-based measurement systems.