Enes Ekinci

Dr. Enes Ekinci


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
EEEnes Ekinci
Enes Ekinci
Fatih KantarcıFatih Kantarcı
Fatih Kantarcı
Müslüm Murat MaraşMüslüm Murat Maraş
Müslüm Murat Maraş
EEErgun Ekinci
Ergun Ekinci
ITIbrahim Turkmen
Ibrahim Turkmen
RDRamazan Demirboğa
Ramazan Demirboğa
First introduced by Davidovits in the late 1970s, geopolymer binders were defined as a novel class of inorganic polymers. Then, research progressed from fundamental investigations into their structure and chemistry to a rapidly expanding body of work on construction applications. While geopolymers have attracted considerable interest for their superior performance, durability and reduced environmental footprint, their widespread adoption depends on extensive evaluation and well-defined future directions. The present paper provides a crucial and comprehensive overview of performance criteria, production parameters and future perspectives of geopolymer binders. A bibliometric trend analysis indicates that research on geopolymers has expanded markedly in recent years. From this body of literature, this paper offers priority directions for future work: standardization of diverse raw materials; development of safer, more sustainable activator systems; systematic improvement of fresh mix properties; acquisition of long-term durability data under realistic exposures; and progression toward internationally accepted test methods and design standards. These insights offer a concise roadmap for advancing geopolymer technology from a promising alternative to a widely adopted construction material.

31 January 2026 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FBFurkan Bayındır
Furkan Bayındır
EEEnes Ekinci
Enes Ekinci
TSTalha Sarıcı
Talha Sarıcı
AÖAlper Özmen
Alper Özmen
This study aimed to examine the impact of various production parameters on the shear performance at the interface between geopolymer mortar (GPM) and sand soil. Initially, the effects of varying NaOH concentrations (5, 10 and 15 M), aggregate types (stream aggregates (SA), crushed stone aggregates (CS) and construction and demolition waste (CDW) aggregates) and alkali/binder ratios (0.5 and 0.6) on GBFS-based GPM specimens were investigated. For this purpose, compressive strength, water absorption and ultrasonic pulse velocity (UPV) tests were carried out on GPM samples cured for 28 days. The maximum 28-day compressive strength (43.6 MPa) and the minimum water absorption (3.78%) were observed in GPM specimens activated with 15 M NaOH, produced with CS, water-cured and cast at an alkali/binder ratio of 0.5. Experimental findings revealed that the effects of aggregate type on high mechanical and low permeability properties were graded as CS > SA > CDW. Additionally, UPV test results showed positive correlation with compressive strength and water absorption values. Subsequently, the shear performance between GPM and sand soil were determined by using shear box test. In direct shear experiments, decreasing the alkali/binder ratio from 0.6 to 0.5 and the usage of CS increased the sand–GPM friction angle. Moreover, numerical modelling was employed to analysed soil-GPM interaction using the finite element method (FEM) in ABAQUS. FEM results showed that the obtained numerical findings demonstrated strong consistency with experimental data, capturing force–displacement trends therefore the numerical model can be used for parametric studies.

12 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ITIbrahim Turkmen
Ibrahim Turkmen
EEEnes Ekinci
Enes Ekinci
Fatih KantarcıFatih Kantarcı
Fatih Kantarcı
EEErgun Ekinci
Ergun Ekinci
AAAbdulrahman Alymani
Abdulrahman Alymani
YAYaşar AYAZ
Yaşar AYAZ
The successful application of extrusion-based 3D-printed geopolymer mortars largely depends on precursor chemistry, activator composition, mixture proportions, and fresh-state behavior, which is highly sensitive to time-dependent structural build-up. This review examines the relationships among mix design, geopolymerization chemistry, rheological properties, and printability requirements for 3D-printed geopolymer mortars. Particular emphasis is placed on the effects of precursor type, alkaline activator characteristics, liquid-to-solid ratio, additives, and fibers on flowability, yield stress, viscosity, extrudability, buildability, shape retention, and interlayer bonding. The review further discusses how geopolymerization kinetics influence the evolution of fresh-state properties, the printable time window, and the transition from extrusion to structural stability. In addition, early-age performance is evaluated in terms of setting behavior, green strength development, and layer-interface integrity. Current challenges, including the lack of standardized test methods, limited comparability among published studies, and the complex coupling between material design and process parameters, are also highlighted. Finally, the review identifies key research gaps and proposes future directions for developing robust, printable, and sustainable geopolymer mortar systems for additive manufacturing in construction.

6 July 2026 in Journal of Sustainable Cement-Based Materials
Verified
Journal Article
Closed access
GDGülşah Deniz
Gülşah Deniz
AKAlican Küçükbayram
Alican Küçükbayram
EEEnes Ekinci
Enes Ekinci
FKFatih Kantarcı
Fatih Kantarcı
AÖAlper Özmen
Alper Özmen
1. Concrete remains one of the most widely used construction materials because of its relatively low cost, widespread availability, and satisfactory long-term performance [1]. For existing reinforc...

29 August 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ITIbrahim Turkmen
Ibrahim Turkmen
MGMuhammed Şamil GÜRKAN
Muhammed Şamil GÜRKAN
EEEnes Ekinci
Enes Ekinci
RDRamazan Demirboğa
Ramazan Demirboğa
AAAbdulrahman Alymani
Abdulrahman Alymani
The physical, mechanical, and microstructural degradation that occurs in concrete elements exposed to high temperatures constitutes an important research topic in terms of the fire safety and service performance of structures. In this study, the behavior of plaster mortars produced with cement-based and ground granulated blast furnace slag (GGBFS)-based binders, as well as normal concrete (interior concrete) specimens coated with these mortars, under high-temperature exposure was experimentally investigated. After the prepared mortars and plastered concrete specimens were exposed to temperatures of 100, 300, 500, and 700 °C, changes in compressive strength, ultrasonic pulse velocity (UPV), water absorption, mass loss, and bulk density were evaluated. Analysis of the experimental results showed that high temperatures, particularly 300 °C and above, caused significant performance losses in all binder systems. Although calcium aluminate cement-based mortars developed high early-age strength, they exhibited more pronounced strength losses under elevated temperatures, whereas geopolymer-based binders demonstrated more stable performance at low and medium temperatures. Additionally, a strong correlation (R2 ≈ 0.89) was observed between UPV and compressive strength in the plastered interior concrete specimens. At 500 and 700 °C, the plastered concrete specimens exhibited 9.8–13.3% and 10.4–18.1% higher residual compressive strength, respectively, compared with the unplastered control specimens. At 700 °C, the PC-based plaster provided the highest improvement in residual compressive strength (18.1%), while the G-Na system exhibited the lowest water absorption, which was 19.5% lower than that of the control concrete. Plastered concrete specimens retained their mechanical and physical properties better than the control (unplastered) concrete specimens at all temperature levels, and this finding was further supported by microstructural analyses. The results indicate that plaster systems produced with different binders are effective in limiting thermal damage to the interior concrete.

3 June 2026 in Archives of Civil and Mechanical Engineering
Verified
Journal Article
Open access
PDF file
EEEnes Ekinci
Enes Ekinci
Fatih KantarcıFatih Kantarcı
Fatih Kantarcı
This study systematically investigates the synergistic effects of specimen dimensions and curing regimes on the mechanical, physical, microstructural, and high-temperature properties of alkali-activated mortars (AAMs). AAMs were prepared by mixing aggregates with ground granulated blast furnace slag, and activated with 10 M NaOH solution. These mixtures were cast into moulds of three different specimen dimensions (5 × 5 × 5 cm, 10 × 10 × 10 cm, and 15 × 15 × 15 cm) and cured under three distinct curing regimes (ambient laboratory conditions, water curing, and outdoor winter exposure. The experimental program focused on the high-temperature performance of AAMs, as well as strength, water absorption, fracture analyses. In addition, the microstructural characteristics of AAM specimens were examined using by Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy, X-ray Diffractometry, and Fourier Transform Infrared Spectroscopy analyses. The results demonstrated that larger specimen dimensions and water curing substantially improved compressive strength (exceeding 50 MPa at 28 days) and reduced water absorption (< 4%), while outdoor curing led to poor performance. Moreover, after exposure to 750 °C, it was observed that larger water-cured specimens maintained higher residual strength and a denser aluminosilicate matrix with fewer cracks. Overall, this study contributes to the potential applications of AAMs by highlighting their suitability for prefabricated and fire-resistant elements, while also providing a novel perspective by demonstrating that AAM’s compressive behavior cannot be fully explained through fracture behavior of traditional Portland cement based composites.