Ramazan Demirboğa

Dr. Ramazan Demirboğa


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
EEEnes Ekinci
Enes Ekinci
Fatih KantarcıFatih Kantarcı
Fatih Kantarcı
Müslüm Murat MaraşMüslüm Murat Maraş
Müslüm Murat Maraş
EEErgun Ekinci
Ergun Ekinci
ITIbrahim Turkmen
Ibrahim Turkmen
RDRamazan Demirboğa
Ramazan Demirboğa
First introduced by Davidovits in the late 1970s, geopolymer binders were defined as a novel class of inorganic polymers. Then, research progressed from fundamental investigations into their structure and chemistry to a rapidly expanding body of work on construction applications. While geopolymers have attracted considerable interest for their superior performance, durability and reduced environmental footprint, their widespread adoption depends on extensive evaluation and well-defined future directions. The present paper provides a crucial and comprehensive overview of performance criteria, production parameters and future perspectives of geopolymer binders. A bibliometric trend analysis indicates that research on geopolymers has expanded markedly in recent years. From this body of literature, this paper offers priority directions for future work: standardization of diverse raw materials; development of safer, more sustainable activator systems; systematic improvement of fresh mix properties; acquisition of long-term durability data under realistic exposures; and progression toward internationally accepted test methods and design standards. These insights offer a concise roadmap for advancing geopolymer technology from a promising alternative to a widely adopted construction material.

12 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ITIbrahim Turkmen
Ibrahim Turkmen
EEEnes Ekinci
Enes Ekinci
Fatih KantarcıFatih Kantarcı
Fatih Kantarcı
EEErgun Ekinci
Ergun Ekinci
AAAbdulrahman Alymani
Abdulrahman Alymani
YAYaşar AYAZ
Yaşar AYAZ
The successful application of extrusion-based 3D-printed geopolymer mortars largely depends on precursor chemistry, activator composition, mixture proportions, and fresh-state behavior, which is highly sensitive to time-dependent structural build-up. This review examines the relationships among mix design, geopolymerization chemistry, rheological properties, and printability requirements for 3D-printed geopolymer mortars. Particular emphasis is placed on the effects of precursor type, alkaline activator characteristics, liquid-to-solid ratio, additives, and fibers on flowability, yield stress, viscosity, extrudability, buildability, shape retention, and interlayer bonding. The review further discusses how geopolymerization kinetics influence the evolution of fresh-state properties, the printable time window, and the transition from extrusion to structural stability. In addition, early-age performance is evaluated in terms of setting behavior, green strength development, and layer-interface integrity. Current challenges, including the lack of standardized test methods, limited comparability among published studies, and the complex coupling between material design and process parameters, are also highlighted. Finally, the review identifies key research gaps and proposes future directions for developing robust, printable, and sustainable geopolymer mortar systems for additive manufacturing in construction.

21 September 2026 in Buildings
Verified
Journal Article
Open access
PDF file
RDRamazan Demirboğa
Ramazan Demirboğa
ITIbrahim Turkmen
Ibrahim Turkmen
ABAhmet Ferhat Bingöl
Ahmet Ferhat Bingöl
ATAhmet Tortum
Ahmet Tortum
KFKhatib Farhan
Khatib Farhan
AAAbdulrahman Alymani
Abdulrahman Alymani
Fire remains one of the most damaging exposures a concrete structure can face, yet how entrained air interacts with that damage is still not fully mapped out. This work looks at that gap directly, testing concretes with nominal total fresh-concrete air contents of approximately 2% (control), 4% (AE-4), and 6% (AE-6) after exposure to temperatures between 23 °C and 700 °C, followed by either air or water cooling. Six properties were measured: dry unit weight, thermal conductivity, compressive strength, flexural strength, ultrasonic pulse velocity (UPV), and dynamic modulus of elasticity (DEM), and each was then modeled with a dedicated feed-forward artificial neural network (ANN) using only AE content and temperature as inputs. The compressive strength of the control mix fell from 65.30 MPa at ambient temperature to 8.57 MPa at 700 °C, an 87% loss, with comparably steep reductions recorded for the other properties. At every temperature tested, water-cooled control specimens retained less strength and stiffness than their air-cooled counterparts. The ANN models, trained with the Levenberg–Marquardt algorithm, reproduced the experimental trends closely, returning coefficients of determination between 0.9364 and 0.9735. Sensitivity analysis placed temperature well ahead of AE content as the dominant driver of property change in every model (sensitivity ratio of 2.36–7.25 versus 1.14–1.87), although AE content was never negligible. The models provide accurate predictions within the investigated experimental ranges and may support preliminary assessment of comparable air-entrained concrete systems. Scanning electron microscopy tied these numbers to what was actually happening inside the material: the C–S–H structure held together reasonably well up to about 500 °C, then broke down visibly by 700 °C, with the AE’s air voids appearing to interrupt crack growth along the way. Together, the results offer both a practical dataset and a set of ready-to-use ANN tools for assessing the residual condition of air-entrained concrete after fire.

28 July 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ITIbrahim Turkmen
Ibrahim Turkmen
Fatih KantarcıFatih Kantarcı
Fatih Kantarcı
EEEnes Ekinci
Enes Ekinci
AAAbdulrahman Alymani
Abdulrahman Alymani
MKMehmet Burhan Karakoç
Mehmet Burhan Karakoç
RDRamazan Demirboğa
Ramazan Demirboğa
3D-printed geopolymer mortars (3DPGPMs) are emerging as low-carbon construction materials that combine digital fabrication with alkali-activated binder technology. However, their hardened performance remains difficult to assess because it is controlled not only by geopolymer chemistry but also by printing parameters, rheological evolution, curing conditions, interlayer bonding, pore structure, and loading direction. This review critically examines the current literature on extrusion-based 3DPGPMs, with emphasis on mechanical properties, durability, sustainability, standardization, and practical implementation. The reviewed studies show that precursor type, activator system, aggregate/binder ratio, additives, printing conditions, and curing regime strongly influence compressive, tensile, flexural, interlayer bond, and anisotropic mechanical responses. Durability performance is also governed by the coupled effects of matrix chemistry and printing-induced features, including interlayer voids, directional pore networks, weak interfaces, and transport pathways that may affect shrinkage, water absorption, chloride penetration, carbonation, acid and sulphate resistance, freeze–thaw response, and elevated-temperature behavior. From a sustainability perspective, the environmental benefits of 3DPGPMs are conditional and depend on activator production, precursor availability, curing demand, transport distance, life-cycle assessment boundaries, and field-scale implementation conditions. The review identifies that the main knowledge gap is the limited availability of integrated datasets linking fresh-state rheology, interlayer quality, multi-scale porosity, mechanical anisotropy, durability indicators, and structural-scale validation. Future research should therefore prioritize standardized reporting, performance-based acceptance criteria, long-term exposure testing, field-scale validation, and predictive material–process–durability models. Overall, this review provides a hardened-performance-oriented synthesis to support the development of reliable, durable, and sustainable 3DPGPMs for construction applications.

7 September 2026 in Journal of Engineered Fibers and Fabrics
Verified
Journal Article
Open access
RDRamazan Demirboğa
Ramazan Demirboğa
ITİbRahim Turkmen
İbRahim Turkmen
KFKhatib Farhan
Khatib Farhan
ATAhmet Tortum
Ahmet Tortum
ABAhmet Ferhat Bingol
Ahmet Ferhat Bingol
AAAbdulrahman Ahmed Alymani
Abdulrahman Ahmed Alymani
This study establishes critical performance thresholds for polypropylene fiber (PPF) reinforced concrete exposed to extreme temperatures up to 700°C. Five concrete groups with PPF volume fractions of 0%, 0.15%, 0.25%, 0.35%, and 0.50% were systematically tested post- high temperature exposure for residual thermal conductivity, compressive/flexural strength, dynamic modulus of elasticity, and ultrasonic pulse velocity and were duly complemented by microstructural analysis. Results identify a pivotal degradation temperature of 500°C, beyond which all mixes suffered severe property loss. However, PPF incorporation demonstrably improved fire resistance. An optimal dosage of 0.25% PPF increased ambient compressive strength by 19% and most effectively mitigated strength loss after high-temperature exposure. All PPF mixes reduced thermal conductivity, with a maximum 12% reduction at 0.50% dosage. Microstructural evidence indicates that melted PPF creates pathways to relieve internal vapor pressure, delaying damage. The predictive modelling results were also quantified: on independent test data, XGBoost achieved R 2 values of 0.9442–0.9815, while GPR achieved R 2 values of 0.9549–0.9824 across the five target properties. For compressive and flexural strength, GPR produced lower RMSE values than XGBoost (2.7944 MPa vs. 2.9923 MPa, and 0.2377 MPa vs. 0.4191 MPa, respectively), while also providing uncertainty estimates for reliability-based interpretation. The findings deliver clear, dosage-dependent guidelines for material design, defining the specific fiber content and temperature thresholds that govern residual performance. This work provides essential criteria for optimizing PPF concrete to enhance structural fire resistance.

29 August 2026 in Polymers
Verified
Journal Article
Open access
PDF file
ITIbrahim Turkmen
Ibrahim Turkmen
MGMuhammed Şamil GÜRKAN
Muhammed Şamil GÜRKAN
EEEnes Ekinci
Enes Ekinci
RDRamazan Demirboğa
Ramazan Demirboğa
AAAbdulrahman Alymani
Abdulrahman Alymani
The physical, mechanical, and microstructural degradation that occurs in concrete elements exposed to high temperatures constitutes an important research topic in terms of the fire safety and service performance of structures. In this study, the behavior of plaster mortars produced with cement-based and ground granulated blast furnace slag (GGBFS)-based binders, as well as normal concrete (interior concrete) specimens coated with these mortars, under high-temperature exposure was experimentally investigated. After the prepared mortars and plastered concrete specimens were exposed to temperatures of 100, 300, 500, and 700 °C, changes in compressive strength, ultrasonic pulse velocity (UPV), water absorption, mass loss, and bulk density were evaluated. Analysis of the experimental results showed that high temperatures, particularly 300 °C and above, caused significant performance losses in all binder systems. Although calcium aluminate cement-based mortars developed high early-age strength, they exhibited more pronounced strength losses under elevated temperatures, whereas geopolymer-based binders demonstrated more stable performance at low and medium temperatures. Additionally, a strong correlation (R2 ≈ 0.89) was observed between UPV and compressive strength in the plastered interior concrete specimens. At 500 and 700 °C, the plastered concrete specimens exhibited 9.8–13.3% and 10.4–18.1% higher residual compressive strength, respectively, compared with the unplastered control specimens. At 700 °C, the PC-based plaster provided the highest improvement in residual compressive strength (18.1%), while the G-Na system exhibited the lowest water absorption, which was 19.5% lower than that of the control concrete. Plastered concrete specimens retained their mechanical and physical properties better than the control (unplastered) concrete specimens at all temperature levels, and this finding was further supported by microstructural analyses. The results indicate that plaster systems produced with different binders are effective in limiting thermal damage to the interior concrete.