In this paper, in order to increase the power conversion efficiency we demonstrated the selective growth of “nanoforest” composed of high density, long branched “treelike” multigeneration hierarchical ZnO nanowire photoanodes. The overall light-conversion efficiency of the branched ZnO nanowire DSSCs was almost 5 times higher than the efficiency of DSSCs constructed by upstanding ZnO nanowires. The efficiency increase is due to greatly enhanced surface area for higher dye loading and light harvesting, and also due to reduced charge recombination by providing direct conduction pathways along the crystalline ZnO “nanotree” multi generation branches. We performed a parametric study to determine optimum hierarchical ZnO nanowire photoanodes through the combination of both length-wise growth and branched growth processes. The novel selective hierarchical growth approach represents a low cost, all solution processed hydrothermal method that yields complex hierarchical ZnO nanowire photoanodes by utilizing a simple engineering of seed particles and capping polymer.

The future electronics will be soft, flexible and even stretchable to be more human friendly in the form of wearable computers. However, conventional electronic materials are usually brittle. Recently, carbon based materials are intensively investigated as a good candidate for flexible electronics but with limited mechanical and electrical performances. Metal is still the best material for electronics with great electrical properties but with poor transparency and mechanical performance. Here we present a simple approach to develop a synthesis method for very long metallic nanowires and apply them as new types of high performance flexible and transparent metal conductors as an alternative to carbon nanotubes, graphene and short nanowire based flexible transparent conductors and indium tin oxide based brittle transparent conductors. We found that very long metallic nanowire network conductors combined with a low temperature laser nano-welding process enabled superior transparent flexible conductors with high transmittance and high electrical conductivity. Further, we demonstrated highly flexible metal conductor LED circuits and transparent touch panels. The highly flexible and transparent metal conductors can be mounted on any non-planar surfaces and applied for various opto-electronics and ultimately for future wearable electronics.

All-printed electronics is the key technology to ultra-low-cost, large-area electronics. As a critical step in this direction, we demonstrate that laser sintering of inkjet-printed metal nanoparticles enables low-temperature metal deposition as well as high-resolution patterning to overcome the resolution limitation of the current inkjet direct writing processes. To demonstrate this process combined with the implementation of air-stable carboxylate-functionalized polythiophenes, high-resolution organic transistors were fabricated in ambient pressure and room temperature without utilizing any photolithographic steps or requiring a vacuum deposition process. Local thermal control of the laser sintering process could minimize the heat-affected zone and the thermal damage to the substrate and further enhance the resolution of the process. This local nanoparticle deposition and energy coupling enable an environmentally friendly and cost-effective process as well as a low-temperature manufacturing sequence to realize large-area, flexible electronics on polymer substrates. (Some figures in this article are in colour only in the electronic version)