Jukkapun Greebmalai

Mr. Jukkapun Greebmalai


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2025 in Materials
Verified
Journal Article
Open access
PDF file
JGJukkapun Greebmalai
Jukkapun Greebmalai
KMKazuyuki Matsumoto
Kazuyuki Matsumoto
KMKeita Marumoto
Keita Marumoto
MYMotomichi Yamamoto
Motomichi Yamamoto
Application of high-heat input welding on high-tensile strength steels causes deterioration of mechanical properties of the welded joint, due to softening and grain coarsening in the heat-affected zone (HAZ). In this study, low-heat input narrow-gap hot-wire laser welding was applied to 12 mm thick 780 MPa-class high-tensile strength steel plate. Conditions were optimized based on microstructural observations of joints produced at various welding speeds. Heat input was estimated from measured grain size. Evaluation of properties of joints welded at 0.5 m/min revealed sound toughness, tensile strength, and elongation. The effect of undermatched weld metal width on joint strength was analyzed using a finite element method. When the width of undermatched weld metal was 2.5 mm, the joint strength was 99% of the base metal strength; when it was 7.5 mm, the strength dropped to 95%. The effect of HAZ softening width on joint strength with even-matched weld metals was similarly analyzed, showing that even when the HAZ softening width was 2.0 mm, the joint strength was 98% of the base metal strength. The results of this study suggest that narrow-gap hot-wire laser welding can efficiently reduce heat input and the HAZ softening zone, thereby achieving both high strength and high toughness.

18 July 2025 in Metals
Verified
Journal Article
Open access
PDF file
JGJukkapun Greebmalai
Jukkapun Greebmalai
SSShun Sadasue
Shun Sadasue
KMKeita Marumoto
Keita Marumoto
EWEakkachai Warinsiriruk
Eakkachai Warinsiriruk
MYMotomichi Yamamoto
Motomichi Yamamoto
This study joins a 20 mm thick 5000-series aluminum alloy using hot-wire insertion combined with narrow-gap laser welding to evaluate the feasibility and welding characteristics of this technique. The findings indicate that weld formation is primarily influenced by the laser energy density and material deposition rate. A strategy for improving weld beads is introduced incorporating a reoriented laser spot during the final pass on narrow-gap joints. This approach improves penetration and produces defect-free joints. The optimal processing conditions result in complete joint formation with four welding passes. Microstructural analysis reveals that the aluminum matrix morphology evolves according to the local thermal history during welding. Measurements show that the weld region is slightly harder than the base metal, whereas slightly lower hardness is observed at the fusion line and inter-pass boundaries, which correlates with the microstructure result.

12 June 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
JGJukkapun Greebmalai
Jukkapun Greebmalai
SSShun Sadasue
Shun Sadasue
KMKeita Marumoto
Keita Marumoto
EWEakkachai Warinsiriruk
Eakkachai Warinsiriruk
MYMotomichi Yamamoto
Motomichi Yamamoto
Laser welding for aluminum alloys has many difficulties. This study joins a 20-mm-thick 5000-series aluminum alloy using hot-wire insertion combined with narrow-gap laser welding to evaluate the feasibility and welding characteristics of this technique. First, an experiment is conducted to analyze weld formation in hot-wire laser welding of aluminum narrow-gap joints. The welds are classified into three categories: lack of fusion, suitable bead formation, and excessive melting. The findings indicate that weld formation is primarily influenced by laser energy density and material deposition rate. Second, a strategy for improving weld beads is introduced that incorporates a reoriented laser spot during the final pass on narrow-gap joints. This approach improves penetration and produces defect-free joints without lack of fusion. The optimal processing conditions result in complete joint formation with four welding passes. Finally, the microstructure and hardness of the aluminum joints are evaluated. Microstructural analysis reveals that the aluminum matrix morphology evolves according to the local thermal history during welding. Measurements show that the weld region is slightly harder than the base metal, whereas slightly lower hardness is observed at the fusion line and inter-pass boundaries, which correlates with the microstructure result.