The aim of this case study was to explore patient satisfaction with the quality of prosthetic leg sockets intended for persons with lower limb amputations. A qualitative study based on in-depth interviews, preceded by a questionnaire session, was carried out with patients from the Rehabilitation Center and Hospital in Malaysia. Twelve out-patient and in-patient amputees with lower limb amputations, specifically below-knee amputations, were chosen randomly. The analysis of patients’ narratives aimed to identify the functional and esthetic characteristics of currently used prosthetic leg sockets and any problems related to them. The obtained results indicated that out of the 12 participants, 41.7% and 25% were satisfied and somewhat satisfied with their current prosthetic sockets. Durability and comfort were rated by the participants as the most important characteristics of prosthetic sockets, with 83.3%. As regards the esthetic appearance of the socket, 66.7% of the respondents considered that the most important feature was the material from which the socket was fabricated. Thus, we conclude that current satisfaction levels with the quality of prosthetic sockets among amputees in Malaysia are suitable, prosthesis being preferred by many amputees. The results can be used to direct future research on cosmesis and functionality of prosthetic socket design.
13 June 2018 in IOP Conference Series: Materials Science and Engineering
Prosthesis is a process of creating artificial human body part. The primary function of below-knee prosthesis is controlling the leg during static and dynamic conditions. The aim of this study is to develop a prosthetic socket made from kenaf-glass fiber composite. The development of prosthetic socket with kenaf-glass fiber was carried out as an attempt to substitute prosthetic socket made from fiberglass polyester composites. Lamination method was adopted to fabricate the prosthetic socket. The laminates contain woven kenaf, glass silk knitted fabric and nylon knitted fabric. The effect of kenaf fabric layering sequence on the volumetric and mechanical properties were evaluated. The flexural and impact strength of 2 layers of kenaf fiber-based laminates are 7.11 MPa and 16.7 kJ/m2 respectively which is higher than the single layer kenaf fabric-based composites. From the results woven kenaf fabric composites has the potential to replace the existing glass fabric-based polymer composites. It is a great initiative to fabricate a prosthetic socket which biodegradable, environmental friendly, locally available, lightweight, comfortable and psychosocially acceptable.
This study describes a newly developed prosthetic leg socket design for a below-knee amputation. Excessive heat and the resulted perspiration within a prosthetic socket were the most common causes for reporting a reduced quality of life for prosthetic users. The product namely AirCirc means air circulation and it has been designed by approach of medical device design process in providing the amputees to maintain the skin temperature inside the socket. This device has been designed to provide the amputees with comfort and ultimate breathable. In order to design the device, the small hole was made in prosthetic socket surface since it has a function as air circulation. Four types of proposed sockets namely P1, P2, P3 and P4 and one control socket were compared on a single patient to determine the best design of prosthetic socket. The result successfully reveals that by using holes can be maintain the temperature inside prosthetic socket. In addition to the eco-friendly material, the woven kenaf was used as material that provides good strength as compared to glass fibre and offer sustainable and biodegradable product yet provides unique and aesthetic surface as came from woven kenaf itself. The objective of this paper is to provide the airflow prosthetic socket design and optimize the use of natural fibre in prostheses field. Thus, with the use of the environmental friendly material, functionality device and heat removal capability make the device suitable for maintaining a comfortable and healthy environment for prosthesis.
29 July 2024 in International Journal of Occupational Safety and Ergonomics
Objectives. The prevalence rate of work-related musculoskeletal disorders (WMSDs) globally is notably high. There are a limited number of studies investigating WMSDs and their associated risk factors. However, there are currently no data available for WMSDs among industrial workers in Peninsular Malaysia. This study aimed to identify the prevalence of WMSDs and associated risk factors among industrial workers experiencing WMSDs through their daily working tasks. Methods. A quantitative study using a questionnaire was conducted among industrial workers from rehabilitation centres and factories in Peninsular Malaysia. The analysis of 232 participant narratives aimed to identify the correlation between job tasks and musculoskeletal pain, especially in case of repetitive and heavy handling tasks. Results. The prevalence of WMSDs among industrial workers stands at 93.1%. The results also indicate that the most affected part of the body was the lower back, with 62.1% for 7 days or more in the last year, caused by industrial workers' job tasks. The prominent risk factors associated with body parts include gender, age, working hours and most difficult tasks with MSDs, especially in the lower back. Conclusion. This survey helps us to understand whether the workers are experiencing any discomfort, pain or disability related to workplace activities.
Work related musculoskeletal disorders (WMSDs) are relatively common among industrial workers. Repetitively lifting, standing, bending, pulling and pushing are the major causes to WMSDs. This paper presents a literature review of studies that have been carried out on the ergonomic workstation design of industrial workers to overcome WMSDs. The objective is to provide information on WMSDs among workers and discusses the implementation of ergonomics to prevent WMSDs among industrial workers through workstation design. The results indicate that many workers in different sectors are exposed to ergonomic risk factors such as repetitive movement, prolonged standing, and awkward posture. Various ergonomic interventions have also been studied to prevent WMSDs. To conclude, it is recommended for future studies to assess these risk factors and its ergonomic implementation to mitigate WMSD risks among industrial workers.