The mechanical properties and crack propagation behavior of aluminum alloys, both with and without corroded surfaces, were thoroughly investigated through molecular dynamic (MD) simulations. The study delved into the effects of corrosion depth and width on the mechanical properties of corroded aluminum alloys. It was found that as the corrosion depth increases, the yield strength experiences an initial decrease followed by a subsequent increase. This can be attributed to the impact of increased corrosion depth on the healing of surface roughness, which ultimately leads to significant changes in yield strength. Furthermore, the presence of corrosion pits was identified as a key factor in regulating the local microstructure evolution within the material, leading to pronounced differences in stress distribution localization. This, in turn, influenced the path of crack propagation within the material. These findings not only contribute to a deeper understanding of the behavior of aluminum alloys under corrosion, but also provide valuable insights for the development of aluminum alloys with enhanced mechanical properties.
Flaky carbonyl iron (FCI) powder is a typical absorbing material with excellent magnetic loss performance. However, its single absorption mechanism, narrow effective absorption bandwidth (RL < −10 dB), poor corrosion resistance, and high density restrict the application of FCI in marine environments. In this study, carbonized urea-formaldehyde resin (UFC)-coated flaky carbonyl iron (FCI@UFC) composites were prepared by in situ polymerization and pyrolysis. Various characterization techniques were employed to investigate the phase structure, microstructure, absorption performance, and corrosion resistance of FCI@UFC. The results showed that FCI@UFC effectively combined the magnetic loss of FCI and the dielectric loss of the porous carbon layer, achieving a wider effective absorption band (EAB) with a smaller thickness. When the simulated absorption layer thickness was 1.2 mm, the EAB ranged from 10.32 to 18 GHz, which demonstrated excellent microwave absorption performance. Additionally, the porous carbon coating slowed down the direct reaction between the corrosive medium and FCI, and the porous structure could also accommodate electrolytes, maintaining a stable electrochemical environment. As a result, FCI@UFC exhibited a higher corrosion potential (−0.472 V) and a lower corrosion current (1.45 × 10−7 A/cm2), indicating good corrosion resistance. This work provides new insights for the preparation of composite materials with excellent microwave absorption and corrosion resistance in practical applications.
A100 steel corrosion in salt fog-SO 2 follows triphasic kinetics, forming dual-layer rust. Alloying and microstructure regulate resistance, but synergistic ions eventually degrade protection, informing its use in marine aviation equipment.