In this study, a method to prepare self-healing coatings by incorporating Alodine-containing microcapsules as fillers in Shape Memory Polyurethane (SMPU) was presented.
The stress corrosion behavior of 7xxx series aluminium alloys in different concentrations NaCl solution was studied, and numerical simulation was conducted in COMSOL Multiphysics based on experimental results. Different stresses were applied on the experiment pieces, the pitting crater deepened with the change of stress level. The corrosion rate increased with the raising stress. There is no positive correlation between stress corrosion degree and chloride ion concentration. The most severe corrosion occurs in 5.0 wt% NaCl solution instead of 6.0 wt% NaCl solution due to the increase of water film conductivity and decrease of solubility of oxygen under high Cl− environment. The finite element model was used to analyze the stress distribution on aluminium alloy surface, to describe the dynamic equation of anodic dissolution of metal due to elastic and plastic deformation. Corrosion occurs mainly in stress concentrated areas. When the stress loading exceeds a certain threshold, plastic strain occurs on the surface of both the specimen and the structural part, the corrosion current density increases instantaneously, and the corrosion behavior in the stress concentration area gradually intensifies. The survey can provide practical theoretical guidance for predicting stress corrosion and extending the service life of equipment in (harsh) marine environments.
This research investigated the potential use of 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) as a biocide in aircraft fuel systems, which is rarely studied due to the unique properties of such systems. The study assessed the effectiveness of CMIT against three microbial isolates using minimum inhibitory concentrations and bacteriostatic tests, and showed that CMIT had good activity against them. Electrochemical studies were conducted to determine the impact of CMIT on the 7B04 aluminum alloy, which demonstrated that CMIT acted as a cathodic inhibitor and exhibited certain levels of short-term and long-term corrosion inhibition effects at concentrations of 100 mg L−1 and 60 mg L−1, respectively. Additionally, the research provided insights into the mechanisms governing microbial problems by studying the reaction of CMIT with glutathione and sulfate. Overall, the study suggested that CMIT may be a useful biocide in aircraft fuel systems and provided important information on its efficacy and mechanism of action.
3 August 2023 in Journal of Applied Electrochemistry
The mechanical properties and crack propagation behavior of aluminum alloys, both with and without corroded surfaces, were thoroughly investigated through molecular dynamic (MD) simulations. The study delved into the effects of corrosion depth and width on the mechanical properties of corroded aluminum alloys. It was found that as the corrosion depth increases, the yield strength experiences an initial decrease followed by a subsequent increase. This can be attributed to the impact of increased corrosion depth on the healing of surface roughness, which ultimately leads to significant changes in yield strength. Furthermore, the presence of corrosion pits was identified as a key factor in regulating the local microstructure evolution within the material, leading to pronounced differences in stress distribution localization. This, in turn, influenced the path of crack propagation within the material. These findings not only contribute to a deeper understanding of the behavior of aluminum alloys under corrosion, but also provide valuable insights for the development of aluminum alloys with enhanced mechanical properties.
Flaky carbonyl iron (FCI) powder is a typical absorbing material with excellent magnetic loss performance. However, its single absorption mechanism, narrow effective absorption bandwidth (RL < −10 dB), poor corrosion resistance, and high density restrict the application of FCI in marine environments. In this study, carbonized urea-formaldehyde resin (UFC)-coated flaky carbonyl iron (FCI@UFC) composites were prepared by in situ polymerization and pyrolysis. Various characterization techniques were employed to investigate the phase structure, microstructure, absorption performance, and corrosion resistance of FCI@UFC. The results showed that FCI@UFC effectively combined the magnetic loss of FCI and the dielectric loss of the porous carbon layer, achieving a wider effective absorption band (EAB) with a smaller thickness. When the simulated absorption layer thickness was 1.2 mm, the EAB ranged from 10.32 to 18 GHz, which demonstrated excellent microwave absorption performance. Additionally, the porous carbon coating slowed down the direct reaction between the corrosive medium and FCI, and the porous structure could also accommodate electrolytes, maintaining a stable electrochemical environment. As a result, FCI@UFC exhibited a higher corrosion potential (−0.472 V) and a lower corrosion current (1.45 × 10−7 A/cm2), indicating good corrosion resistance. This work provides new insights for the preparation of composite materials with excellent microwave absorption and corrosion resistance in practical applications.