Enrique  Acuña

Dr. Enrique Acuña


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2021 in Processes
Verified
Journal Article
Open access
PDF file
JCjuan pablo Hurtado Cruz
juan pablo Hurtado Cruz
BVBryan Villegas
Bryan Villegas
SPSebastian Pérez
Sebastian Pérez
EAEnrique Acuña
Enrique Acuña
The connection between an intake fan and a ventilation shaft must be designed in such a way that it minimizes the energy waste due to singularity losses. As a result, the questions of which radius of curvature to use and if guide vanes have to be included need to be answered. In that case, the variables such as the number, upstream and downstream penetration length, radius of curvature, and width of the vanes, need to be defined. Although this work is oriented to mine ventilation, these questions are usually valid in other engineering applications as well. The objective of this study is to define the previously mentioned variables to determine the optimal design combination for the radius/diameter relationship (r/D). Computational fluid dynamics was used to determine the shock loss factor of seven elbow curvature ratios for a 3 m diameter duct and fan, with and without guide vanes to estimate the best performing configuration and, therefore, to maximize the fan airflow volume. The methodology used consisted of initially developing models in 2D geometries, to optimize the meshing and the CPU use, and studying separately the number of vanes, upstream and downstream penetration, radius of curvature, and width of the vanes for each curvature ratio (r/D). Then, the best-performing variable combinations for each curvature ratio were selected to be simulated and studied with the 3D geometries. The application of the guide vane designs for three-dimensional simulated geometries is presented, first without and then with guide vanes, including the shock loss factors obtained. The methodology and obtained results allowed quantifying the energy savings and to reduce the CFD simulations steps required to optimize the design of the elbow and guide vanes. The results obtained cannot be used with elbows in exhaust fans, because fluid dynamics phenomena are different.

8 September 2021 in Processes
Verified
Journal Article
Open access
PDF file
JCjuan pablo Hurtado Cruz
juan pablo Hurtado Cruz
GRGabriel Reyes
Gabriel Reyes
JNJuan Pablo Vargas Norambuena
Juan Pablo Vargas Norambuena
EAEnrique Acuña
Enrique Acuña
A Computational fluid dynamic (CFD) model was developed considering three geometries for primary parallel fan stations that have already been developed, implemented, and are currently in operation within Chilean mines. To standardize the comparison, the same primary fan was used in all the simulations with a unique set of settings (speed, blade angle, and density). The CFD representation was used to determine the operating point per configuration and compare the performances in terms of airflow and pressure delivered. This approach allowed ranking primary fan station geometry based on resistance curve and energy consumption of the fan. This paper presents the results obtained through the CFD simulations and the corresponding primary fans operating points of each configuration: symmetrical branches (SB), overlap branches (OB), and run around (RA) bypass. The RA configuration was identified as the best-performing station geometry on the lowest frictional and shock pressure losses, highest airflow delivery, and lowest energy cost. The results are discussed, considering pressure, velocity, and vector contours to understand the fluid dynamics phenomena occurring inside the station. The capital cost involved in the development of each primary parallel station was considered in the analysis in addition to the energy cost to determine the economic configuration over time.