This study examines the potential of phosphogypsum—a by-product of the phosphoric acid production process—as a low-cost and sustainable adsorbent for the removal of crystal violet dye from aqueous solutions. Phosphogypsum was characterized using X-ray fluorescence, X-ray diffraction, particle size distribution, and zeta potential measurements, revealing that it is primarily composed of di-hydrate calcium sulfate, with a negatively charged surface in the pH range from 1.8 to 8.2 and a mean particle size of 12.2 microns. Experiments were conducted to evaluate the effects of pH, adsorbent dose, contact time, and temperature on its adsorption ability. The results indicated that the adsorption capacity increased with the pH up to a value of 5, while higher initial dye concentrations enhanced the uptake capacity but reduced the removal efficiency. The adsorption process was well described by the Langmuir isotherm, suggesting chemisorption as the dominant mechanism, while the pseudo-second-order kinetic model indicated that adsorption primarily occurred on the exterior surface. The thermodynamic analysis revealed that the process was exothermic and spontaneous at 20 °C and 30 °C, with a decrease in favorability at higher temperatures. The adsorbent demonstrated reusability, with a removal efficiency of 71% after five regeneration cycles. Furthermore, phosphogypsum was successfully applied to treat real textile effluent, achieving significant reductions in both biochemical oxygen demand (71%) and dye content (87%). These findings highlight the potential of phosphogypsum as an effective and eco-friendly adsorbent for wastewater treatment, contributing to waste valorization and environmental sustainability.
This study examined significant changes in phosphogypsum, a byproduct of the phosphoric acid industry, induced via mechanical activation through intensive grinding using a planetary ball mill. Alterations in crystallinity, surface area, and zeta potential were monitored using X-ray diffraction, Brunauer–Emmett–Teller analysis, zeta potential measurements, X-ray photoelectron spectroscopy, and scanning electron microscopy. The severe grinding of this mining waste led to the conversion of gypsum (CaSO4·2H2O) to anhydrite (CaSO4), an increase in surface area from 5.8 m2/g to 17.8 m2/g, and a decrease in pore radius from 76.6 nm to 9.3 nm. The zeta potential shifted as the isoelectric point changed from pH 8.5 to pH 4.3. These modifications enhanced the material’s potential as a cost-effective and eco-friendly adsorbent for wastewater treatment. The enhanced adsorption capabilities for Cd and Pb were evaluated, revealing a higher adsorption capacity (~40 mg/g for both) and removal efficiency (~90% for Cd and ~80% for Pb) for activated phosphogypsum. The adsorption process followed the Freundlich isotherm and pseudo-second-order kinetic model, indicating its physisorption nature and spontaneous thermodynamic characteristics, and highlighting its potential for wastewater treatment. The mechanically activated adsorbent demonstrated over 90% desorption efficiency over five cycles, ensuring effective regeneration and reusability for Cd and Pb removal. Real tannery wastewater was treated using mechanically activated phosphogypsum at pH 6 and 70 °C for 60 min, achieving a 94% Cd and 92% Pb removal efficiency, with an overall heavy metal removal efficiency of up to 83%. This study demonstrates the sustainable utilization of phosphogypsum, contributing to green wastewater management and environmental protection.