Mamdoh Alajmi

Prof. Mamdoh Alajmi

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 August 2019 in Journal of Geophysical Research: Solid Earth
Verified
Journal Article
Closed access
ISIlya V. Sychev
Ilya V. Sychev
Ivan KoulakovIvan Koulakov
Ivan Koulakov
IEIgor Egorushkin
Igor Egorushkin
SZSergey Zhuravlev
Sergey Zhuravlev
MWMichael West
Michael West
Mamdoh AlajmiMamdoh Alajmi
Mamdoh Alajmi

8 April 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
AAAbdulrahman Alosaimi
Abdulrahman Alosaimi
AAAbdulrahman A. Aljabbab
Abdulrahman A. Aljabbab
Mamdoh AlajmiMamdoh Alajmi
Mamdoh Alajmi
AQAyman N. Qadrouh
Ayman N. Qadrouh
MFMohsen Farahat
Mohsen Farahat
RARAMZI SAUD ALMUTAIRI
RAMZI SAUD ALMUTAIRI
This study examines the potential of phosphogypsum—a by-product of the phosphoric acid production process—as a low-cost and sustainable adsorbent for the removal of crystal violet dye from aqueous solutions. Phosphogypsum was characterized using X-ray fluorescence, X-ray diffraction, particle size distribution, and zeta potential measurements, revealing that it is primarily composed of di-hydrate calcium sulfate, with a negatively charged surface in the pH range from 1.8 to 8.2 and a mean particle size of 12.2 microns. Experiments were conducted to evaluate the effects of pH, adsorbent dose, contact time, and temperature on its adsorption ability. The results indicated that the adsorption capacity increased with the pH up to a value of 5, while higher initial dye concentrations enhanced the uptake capacity but reduced the removal efficiency. The adsorption process was well described by the Langmuir isotherm, suggesting chemisorption as the dominant mechanism, while the pseudo-second-order kinetic model indicated that adsorption primarily occurred on the exterior surface. The thermodynamic analysis revealed that the process was exothermic and spontaneous at 20 °C and 30 °C, with a decrease in favorability at higher temperatures. The adsorbent demonstrated reusability, with a removal efficiency of 71% after five regeneration cycles. Furthermore, phosphogypsum was successfully applied to treat real textile effluent, achieving significant reductions in both biochemical oxygen demand (71%) and dye content (87%). These findings highlight the potential of phosphogypsum as an effective and eco-friendly adsorbent for wastewater treatment, contributing to waste valorization and environmental sustainability.

22 March 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
AAAbdulrahman Alosaimi
Abdulrahman Alosaimi
AAAbdulrahman A. Aljabbab
Abdulrahman A. Aljabbab
Mamdoh AlajmiMamdoh Alajmi
Mamdoh Alajmi
AQAyman N. Qadrouh
Ayman N. Qadrouh
MFMohsen Farahat
Mohsen Farahat
SASultan A Alkhammali
Sultan A Alkhammali
This study examined significant changes in phosphogypsum, a byproduct of the phosphoric acid industry, induced via mechanical activation through intensive grinding using a planetary ball mill. Alterations in crystallinity, surface area, and zeta potential were monitored using X-ray diffraction, Brunauer–Emmett–Teller analysis, zeta potential measurements, X-ray photoelectron spectroscopy, and scanning electron microscopy. The severe grinding of this mining waste led to the conversion of gypsum (CaSO4·2H2O) to anhydrite (CaSO4), an increase in surface area from 5.8 m2/g to 17.8 m2/g, and a decrease in pore radius from 76.6 nm to 9.3 nm. The zeta potential shifted as the isoelectric point changed from pH 8.5 to pH 4.3. These modifications enhanced the material’s potential as a cost-effective and eco-friendly adsorbent for wastewater treatment. The enhanced adsorption capabilities for Cd and Pb were evaluated, revealing a higher adsorption capacity (~40 mg/g for both) and removal efficiency (~90% for Cd and ~80% for Pb) for activated phosphogypsum. The adsorption process followed the Freundlich isotherm and pseudo-second-order kinetic model, indicating its physisorption nature and spontaneous thermodynamic characteristics, and highlighting its potential for wastewater treatment. The mechanically activated adsorbent demonstrated over 90% desorption efficiency over five cycles, ensuring effective regeneration and reusability for Cd and Pb removal. Real tannery wastewater was treated using mechanically activated phosphogypsum at pH 6 and 70 °C for 60 min, achieving a 94% Cd and 92% Pb removal efficiency, with an overall heavy metal removal efficiency of up to 83%. This study demonstrates the sustainable utilization of phosphogypsum, contributing to green wastewater management and environmental protection.

9 April 2026 in Geophysical Journal International
Verified
Journal Article
Open access
JBJing Ba
Jing Ba
MTMaozheng Tong
Maozheng Tong
MPMengqiang Pang
Mengqiang Pang
AQAyman N Qadrouh
Ayman N Qadrouh
Mamdoh AlajmiMamdoh Alajmi
Mamdoh Alajmi
MBMartin Balcewicz
Martin Balcewicz
SUMMARY: Tight sandstone reservoirs, as a sort of widely distributed unconventional hydrocarbon resource, are characterized by complex microstructural features that give rise to intricate elastic wave responses. In this study, we estimate the wave properties of tight sandstones using a reformulated digital rock physics method. Nine tight sandstone cores from the Sichuan and Ordos Basins in China are selected for X-ray diffraction and ultrasonic measurements under varying pressures and fluid saturations. Variations in elastic wave velocities with respect to effective pressure are analysed for both gas and water saturation. Computed tomography (CT) scans at two resolutions are conducted to reconstruct multiphase digital rocks and investigate the effects of mineral boundaries (MB). Numerical simulations using the finite element and finite difference methods are then performed and compared with the ultrasonic data. The results show that the simulations can effectively estimate elastic properties when accounting for the effects of MB. Furthermore, the resolution of CT scans determines the scale of microstructures captured, which in turn dictates the pressure range over which the numerical simulations produce valid results. The findings indicate that the wave responses derived from these simulations are intrinsically linked to the scan resolution.

30 April 2026 in Geophysical Journal International
Verified
Journal Article
Open access
AQAyman N Qadrouh
Ayman N Qadrouh
JCJosé M Carcione
José M Carcione
Mamdoh AlajmiMamdoh Alajmi
Mamdoh Alajmi
JBJing Ba
Jing Ba
SUMMARY: The intrinsic attenuation of a seismic wave is a key property of rocks. Knowledge of Q (quality factor), which measures the attenuation, provides information not only about the type of rock, but above all about the pore fluids. In addition, the attenuation is needed for inverse Q filtering and is useful for localizing seismic sources. The methods for determining Q are based on the amplitude and frequency content of the signal, for example, the spectral ratio and frequency shift methods. In this paper, we consider a nearly frequency-independent Q factor so that the attenuation factor is proportional to frequency, so that high frequencies are attenuated. We use the frequency shifts (from the source to the receiver) to estimate the Q-factor for media with arbitrary geometric interfaces. The amplitude can be affected by factors other than attenuation, namely, geometric spreading and transmission coefficient. The shifts depend on the type of spectrum, which differs for seismic, microseismic and seismological (earthquake) sources. The inversion for Q assumes that the source spectrum is known, as well as the seismic velocities and the location of the interfaces and the source. On the other hand, if Q is known, sources can be located based on a generalization of the Battaglia–Aki method to heterogeneous media and using the centroid of the spectrum and the traveltimes at the receivers instead of the amplitude of the signal in the time domain. Alternatively, we provide formulas for the maximum of the signal spectrum that can also be used (peak frequency shift). Modelling and inversion is performed with 2-D and 3-D ray tracing algorithms based on Fibonacci search and minimizations with the Praxis algorithm and simulated annealing. We generate synthetic test seismograms with a direct 2-D full-wave algorithm based on the pseudo-spectral Fourier method, compare the results with those of ray tracing and use the minimization algorithm in combination with ray tracing to determine the source location.