Kefiran, which was isolated from kefir grains, was used for the fabrication of cryogel-films in the presence of plasticizers, such as glycerol and sorbitol. Varying concentration ratios of the exopolysaccharide/plasticizer system were employed in the process of the cryogel-film formulation and their effect on the physical (film thickness, moisture content, and solubility) and the mechanical (tensile strength and elongation at break) properties of the films was monitored. Kefiran-film vapor adsorption isotherms were calculated, and a thermal analysis of the samples was also performed. The structural characteristics of the cryogel-films were observed using confocal laser scanning microscopy. The cryo-treatment, alongside the plasticizer addition, affected the physical and mechanical properties of the kefiran films, as well as their morphology. Increasing kefiran concentration resulted in increasing the film thickness, the moisture content, and the tensile strength, while decreased their solubility and their elongation at break. Kefiran-film adsorption isotherms were affected by the cryo-treatment, the kefiran concentration, and the plasticizer use and concentration. The thermal analysis of the kefiran films showed thermal stability. The presence of the plasticizers and their increment concentration resulted in decreasing the glass transition and the melting temperatures. The cryo-treatment and the presence of plasticizers resulted in the films appearing smoother. Glycerol proved to affect more than the sorbitol–water vapor adsorption and the morphology of kefiran films.

Research background. Formulations based on vegetable or fish oil and modifications in the production technology of dry fermented sausages have emerged in recent years aiming to achieve the desirable target of reducing the fat content of these meat products. However, previous efforts have confronted many difficulties, such as high weight loss and unacceptable appearance due to intensely wrinkled surfaces and case hardening. The objective of this study was to produce and evaluate dry fermented sausages by utilizing a meat protein-olive oil emulsion as fat substitute and indigenous lactic acid bacteria (LAB) with probiotic properties isolated from traditional Greek meat products. Experimental approach. A novel formulation with extra virgin olive oil and turkey protein was developed to totally replace the conventionally added pork fat. Identification and evaluation of the probiotic and safety characteristics of autochthonous LAB isolates from spontaneously fermented sausages were performed and three LAB isolates were finally selected as starter cultures. Physicochemical, microbiological and sensory analyses were carried out in all treatments (control, L. acidophilus, L. casei, L. sakei, P. pediococcus) during fermentation. Results and conclusions. Ready-to-eat sausages were found to be microbiologically stable. The olive oil-based formulation produced in this study generated a mosaic pattern visible in the sliced product simulating the fat in conventional fermented sausages and was regarded as an ideal fat substitute for the production of fermented sausages. An autochthonous isolate of Lactobacillus casei exhibited the best adaptation in the final products as it was molecularly identified to be present in the highest counts among the LAB isolates used as starter cultures. Novelty and scientific contribution. Α novel and high-quality dry fermented meat product was produced replacing added pork fat with a fat substitute based on a meat protein-olive oil emulsion. Autochthonous LAB with in vitro probiotic properties could have a potential use in large-scale novel dry fermented sausages production. Such isolates could be used as starters in an effort to standardize the production process and retain the typical organoleptic and sensory characteristics. Moreover, isolates like L. casei 62 that survived in high counts in the final products, can increase the safety of fermented sausages by competing not only with pathogens but also with the indigenous microbiota and could have a potential functional value for the consumer.

The demand of consumers for a healthier and functional diet necessitates amongst others, extending the shelf life of the natural probiotic kefir, reducing simultaneously packaging, transportation, and storage costs. Among the different drying methods, spray drying is widely used and industrially favorable to produce powdered products. The aim of the present work was to study the effect of the final fermentation pH and the pre-drying storage temperature (4 °C for 7 days) on the physicochemical properties, moisture content, pH, color, adsorption isotherms, and the microbiological characteristics of spray dried kefir. Kefir grains were used for the fermentation and the production of the samples. Viabilities of lactococci, lactobacilli, and yeasts were determined during a storage period of 45 days. Both final fermentation pH and low-temperature storage significantly affected the properties of the kefir powders and their respective reconstituted samples. According to the findings of the study, the desirable microbial populations of the reconstituted kefir powders are possible to accomplish by using an increased final fermentation pH at 5.2 and/or by applying low-temperature storage of the fermented milk, together with the kefir grains, at 4 °C for 7 days prior to drying. The yeast population was affected the least by the studied factors, and the use of kefir grains as starter culture favored the viability of lactococci and lactobacilli after spray drying and during storage up to 45 days.

The effect of fat content and added yoghurt, honey and pomegranate juice concentration on the overrun, and the physicochemical, rheological and sensory properties of frozen yoghurt samples was investigated, aiming in the production of a novel low-fat and functional dairy fermented frozen dessert. For this purpose, the methodology of mixture experiment was applied to twenty samples, while a control sample (without using honey and pomegranate juice) was also produced. According to the results, the increase in yoghurt concentration resulted in increasing pH, overrun, brightness, elastic modulus (G´) determined at -2 °C and sensory hardness of the samples, while it reduced color parameters a* and b*, creaminess, sweetness and fattiness. Increasing honey concentration reduced lactic acid concentration, G´ at -2 °C, hardness, sensory acidity, and to a lesser extent pH, while increased color parameter b*, overrun, sensory color intensity, creaminess, sweetness, and fattiness of the samples. The increase in pomegranate juice concentration resulted in decreasing pH, brightness and b*, as well as increasing a*, color intensity, creaminess and sensory acidity. Finally, fat, by interacting with one or two of the three constituents (yoghurt, honey and pomegranate juice), decreased pH, creaminess and fattiness, while increased lactic acid concentration, b*, color intensity and to a lesser degree the overrun level of the samples. Overall acceptability of the samples indicated that it is possible to use honey and pomegranate juice in the production of low-fat frozen yoghurt with favorable sensory properties.

The biological and nutritional value of kefir makes it imperative to widen its customer reach by extending its shelf life, enabling its storage and transport at ambient temperatures, and reducing its packaging cost requirements. A well-documented and widely used food processing method that can achieve the above-mentioned outcomes is spray drying through the formulation of kefir powder, with quality attributes that will closely resemble that of the original product. In the present work, a variety of drying carriers (trehalose, fructo-oligosaccharides, maltodextrin, gum arabic, and whey proteins) were studied with regard to their effect on the properties of powdered and reconstituted kefir samples. Particularly, the physicochemical characteristics (moisture content, pH, acidity, color), powder properties (bulk density, tapped density, water solubility index, insoluble matter), adsorption isotherms, particle size distribution, microbiological properties, and structural characteristics of the samples were evaluated. Gum arabic and maltodextrin produced kefir powder samples with the lowest moisture content. Spray drying affected a reduced acidity and, as a consequence, an increased pH in the reconstituted samples, especially without any carrier addition and with trehalose and fructo-oligosaccharides irrespective of their concentration. Desirable color attributes were achieved on the kefir powder samples with trehalose, fructo-oligosaccharides, and maltodextrin regardless of their concentration in the product. Fructo-oligosaccharides, added at 3%, gave the highest values of bulk density, while whey proteins, due to their nature, exhibited the lowest. All carriers tested improved the water solubility index when compared to the control sample. The sample with 10% whey proteins exhibited the lowest moisture adsorption compared to the control at the highest relative humidity environments employed for the test. In the absence of agglomeration, powder granule size and structural morphology were not affected by the carriers. The survival of lactococci in the powdered kefir samples, in comparison to the control product, was higher in the case where 4% trehalose or 5 to 10% whey proteins were added. On the contrary, yeast populations decreased significantly during drying and they were not affected by the presence of the different carriers. As shown by the findings of the present study, trehalose proved to be the most effective carrier, among the others used, for producing high-quality kefir powder products. However, further work is required with regard to the keeping quality of the product during long-term storage.

Kefiran, the extracellular polysaccharide produced from the Generally Recognized as Safe (GRAS) bacteria in kefir grains, with its well-documented functional and health-promoting properties, constitutes a promising biopolymer with a variety of possible uses. Its compatibility with other biopolymers, such as milk proteins, and its ability to form standalone cryogels allow it to be utilized for the fabrication of films with improved properties for applications in the food and biomedical–pharmaceutical industries. In the present work, the properties of kefiran films were investigated in the presence of milk proteins (sodium caseinate, native and heat-treated whey proteins, and their mixtures), alongside glycerol (as a plasticizer) and cryo-treatment of the film-forming solution prior to drying. A total of 24 kefiran films were fabricated and studied for their physical (thickness, moisture content, water solubility, color parameters and vapor adsorption), mechanical (tensile strength and elongation at break), and optical properties. Milk proteins increased film thickness, solubility and tensile strength and reduced water vapor adsorption. The hygroscopic effect of glycerol was mitigated in the presence of milk proteins and/or the application of cryo-treatment. Glycerol was the most effective at reducing the films’ opacity. Heat treatment of whey proteins proved to be the most effective in increasing film tensile strength, reducing, at the same time, the elongation at break, while sodium caseinates in combination with cryo-treatment resulted in films with high tensile strength and the highest elongation at break. Cryo-treatment, carried out in the present study through freezing followed by gradual thawing of the film-forming solution, proved to be the most effective factor in decreasing film roughness. Based on our results, proper selection of the film-forming solution composition and its treatment prior to drying can result in kefiran–glycerol films with favorable properties for particular applications.