A quasi-axisymmetric stellarator, the CFQS, has been designed as a joint project of the National Institute for Fusion Science and Southwest Jiaotong University to prove intrinsic advantages of quasi-axisymmetry. Principal parameters of the CFQS are as follows: the major radius is 1 m, the magnetic field strength is 1 T, the aspect ratio is 4, and the toroidal periodic number is 2. The magnetic field configuration is designed based on that of the CHS-qa. Enhanced confinement properties within the context of neoclassical theory are achieved by its quasi-axisymmetric configuration. In the entire radial range, the magnetic well is retained to keep favourable stability features in the magnetohydrodynamic equilibrium. A magnetic field coil system was designed for the CFQS, which consists of 16 modular coils, 12 toroidal field coils, and 4 poloidal field coils. The supporting structure is designed to withstand strong electromagnetic force under 1 T operation, maintaining enough space for heating and diagnostic systems. The mock-up modular coil with the most complicated shape was constructed by Hefei Keye Electro Physical Equipment Manufacturing Co., Ltd. to check manufacturability and the achieved accuracy. A heat-run test was performed to check the temperature rise of conductors, and the capability of 1 T operation was confirmed. After various tests for the mock-up coil, construction of actual modular coils and the vacuum vessel has begun.
Controlled particulate injections from the PPPL impurity powder dropper (IPD) into the Large Helical Device have demonstrated positive effects on the wall conditions on both an intra and inter-shot basis. Injections over a range of densities, input powers, pulse lengths, heating schemes, injection quantities and main ion species show conclusive evidence of improvement to plasma wall conditions. Successful injections are confirmed by both spectroscopic measurements as well as real-time visible camera signals. In 7 s long plasmas the responses include a reduction in wall recycling as well as a reduction in native impurity content as observed over the course of several discharges. For plasmas longer than 40 s, improvements to the recycling rate and increased impurity control are observed in real time as a consequence of the extended particulate injections. These experiments demonstrate the extended applicability of this solid particulate conditioning technique to the control and maintenance of the plasma wall conditions. In addition they are an important initial step in the development of the real-time boronization technique as a supplement to standard conditioning scenarios.
6 April 2004 in Plasma Physics and Controlled Fusion