Solid‐state batteries are considered as a reasonable further development of lithium‐ion batteries with liquid electrolytes. While expectations are high, there are still open questions concerning the choice of materials, and the resulting concepts for components and full cells. On the basis of an analysis of all materials and concept options, a roadmap for solid‐state batteries is presented, relying on both literature survey and experts' opinions. Diverse cell concepts with different solid electrolytes may be developed up to the commercial level, yet there are still major uncertainties concerning production routes, safety as well as cost. As one of the key developments, it appears that hybrid material and cell concepts may be particularly successful on the way to commercialization.
Lithium-ion (Li-ion) batteries have become the preferred power source for electric vehicles (EVs) due to their high energy density, low self-discharge rate, and long cycle life. Over the past decade, technological enhancements accompanied by massive cost reductions have enabled the growing market diffusion of EVs. This diffusion has resulted in customized and cost-effective Li-ion battery cell designs tailored to automotive requirements. This study describes design trends in Li-ion batteries from the pack to the electrode level based on empirical data, including pack energy, cell capacity, outer cell dimensions and formats, energy density, specific energy, and electrode properties, such as active material selection, porosities, and component thicknesses. Market share-weighted findings imply several trends, such as (1) increasing cell dimensions, with the longest cells reaching 500 mm (pouch) and almost 1000 mm (prismatic) in 2021, (2) increasing differentiation between either high-energy or low-cost cathode and anode materials, and (3) increasing cell energy, equivalent to gaining about 100% (energy density) and 70% (specific energy) compared to the 2010 and 2021 averages. Despite these improvements, this study finds that the widespread market diffusion of the latest cell technologies proceeds slower than industry announcements suggest and that several well-known, literature-proofed potentials are not yet fully exploited.
The increase in battery demand, particularly from the mobility sector, has resulted in a significant increase in the required production capacities. Europe is facing a large-scale expansion of production capacities. Currently, the battery cell demand in the region accounts for approximately 25% of global demand, while only 10% of global production capacities are located there. This has motivated the announcement of a large number of production projects of over 2 TWh by 2030, which would mean overcapacity compared to projected European cell demand. In recent years, however, many of the announced Gigafactories have been delayed or cancelled. This paper aims to develop a risk assessment model for forecasting realistic future capacities for battery cell production in Europe. The proposed model combines an evaluation of industry announcements at the project level with a Monte Carlo simulation to translate the announced production projects into a European production capacity forecast. Therefore, the likelihood of implementation for individual projects is analysed within 11 topics (company, country and maturity related) and scenarios for future European production capacities are elaborated. Model validation indicates that from 54% to 75% of the announced capacities in Europe are likely to be realised (approx. 1.2 GWh–1.7 GWh by 2030). The majority of battery production projects announced in Europe are still in the planning phase (66%) with Germany, France, Scandinavia and Eastern Europe emerging as key regions. The modelling of production capacities predicts that dependency on cell imports to Europe will be reduced compared to today.
Factory announcements for battery production are increasing in number as European demand for battery cells grows. Using a Monte Carlo simulation (108 projects as of October 2025) with risk factors for individual projects, the predicted theoretical production capacity for lithium-ion batteries in Europe will rise to 1.1–1.5 TWh, enabling a real production output of 0.8–1.0 TWh by 2030. Our analysis suggests necessary cumulative investments in battery cell gigafactories of 36–139 billion euros by 2030. The industrial output of LIB cells in 2030 will have a value of 35–99 billion euros, of which the market size of battery production is around 6–17 billion euros. Furthermore, 43,000–174,000 direct jobs could be created, with the strongest impacts seen in Eastern Europe by the end of the decade. The raw material demand generated by this industry rises steeply: lithium will rise from 14 kt in 2025 to 47–133 kt, and nickel from 83 kt to 226–640 kt by 2030, implying continued import dependencies. The energy demand of European cell production will be 8.4–19.9 TWh in 2030. Furthermore, CO2 emissions of cell production will be 1.6 to 3.7 Mt CO2-eq in 2030. The volume of production scrap is estimated at 160–398 kt in 2030, creating near-term demand for recycling capacities.
The rapid global expansion of lithium-ion battery manufacturing requires systematic methods to compare and evaluate established and innovative production technologies. This paper develops a multi-criteria decision analysis approach to assess process equipment along four dimensions: cost, throughput, quality and sustainability. Ten criteria are defined, derived from a literature review. Building on these criteria, PROMETHEE II is selected as a suitable multi-criteria decision analysis method and adapted to the battery manufacturing context. The adaptations include exclusion criteria for minimum performance requirements, modelling of parameter uncertainty via Monte Carlo simulation, tailored preference functions for different criteria, and a user-specific weighting scheme reflecting different stakeholder priorities. The evaluation method is illustrated in a case study comparing knife and laser slitting of electrodes. The case study shows that advantages, such as improved quality, must always be weighed against disadvantages, such as higher investment costs. A tipping-point analysis demonstrates how the method can translate abstract trade-offs into concrete technological or economic targets, e.g., required cost reductions. The proposed approach provides a transparent, flexible decision-support framework for selecting production technologies and for guiding R&D and investment priorities in battery cell manufacturing.