The strength properties of softwood components with bonded joints reinforced with fasteners were investigated and compared. Initial tests of the strength of the glue joints were carried out, with a change in the type of adhesive used. The application method significantly influenced the shear strength of the joint. With the adhesive and pre-bonding systems used, the shear strength of the adhesive joint of pine wood (Pinus silvestris L.) with PUR and PVAC resin was determined. The industrial results were 31% lower than in the shear test of the wooden joint bonded with PVAC glue. In terms of transverse shear force with staples, the joint has a transverse holding force that is higher than components connected with screws or nails. As the number of glue sticks increased, the shear strength of the pine wood increased. The strengths of the joined components in the glue roller method had an intermediate value. They did not differ significantly between the two-row gluing systems used. An increase in the force required to shear the bonded joint was observed for the different adhesive systems, the fasteners used, and their density.
This study employs the finite element method to propose a model-based design strategy for upholstered furniture frames. Three-dimensional discrete models of these frames were created, considering the orthotropic characteristics of pine (Pinus sylvestris L.) and spruce (Picea abies L.) wood, reinforced structurally with glue joints and upholstery staples. The modelling process utilised the CAE system Autodesk Inventor Nastran, applying the finite element method (FEM). Static analyses were performed by simulating standard loading conditions. The calculations incorporated the stiffness coefficients of the frame’s comb joint connections. The findings illustrate the stress distribution, displacements, and equivalent strains within the furniture frame models. The deformation and strength parameters of the frames introduce a novel perspective on designing upholstered furniture structures using the component-based FEM approach. These outcomes are applicable to the development of upholstered furniture designs.