Adrian Trociński

Dr. Adrian Trociński

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 September 2020 in Materials
Verified
Journal Article
Open access
PDF file
RMRadoslaw Mirski
Radoslaw Mirski
DDDorota Dziurka
Dorota Dziurka
MCMonika Chuda-Kowalska
Monika Chuda-Kowalska
Marek WieruszewskiMarek Wieruszewski
Marek Wieruszewski
JKJakub Kawalerczyk
Jakub Kawalerczyk
ATAdrian Trociński
Adrian Trociński
The study assessed the quality of pine lumber by marking the modulus of elasticity in the horizontal system. The research material was a plank with the following dimensions: 137 mm wide × 39.50 mm thick × 3485 mm long. The pine wood was obtained by sawing timber in the form of logs with round cross sections and originating from the Forest Division Olesno (50°52′30″ N, 18°25′00″ E). Each long log was sawn to provide four logs of about 3.5 m, which were marked as butt-end logs (O), middle logs (S)—2 items, and top logs (W). The origin of the logs from the trunk (Pinus sylvestris L.) has a significant impact on the physical and mechanical properties of the wood from which they are made. Only butt-end logs (log type O) allows for the production of high-quality timber elements. The pine timber that was evaluated in this paper had a high density of about 570 kg/m3 and a high percentage of timber items were assigned to class C24 and higher (above 50%). The adopted horizontal model of evaluation of the modulus of elasticity gave similar results to those obtained in an evaluation according to the EN-408.

14 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
ADAdam Derkowski
Adam Derkowski
MKMarcin Krzysztof Kuliński
Marcin Krzysztof Kuliński
ATAdrian Trociński
Adrian Trociński
JKJakub Kawalerczyk
Jakub Kawalerczyk
RMRadoslaw Mirski
Radoslaw Mirski
The aim of this study was to determine the mechanical properties of laminated beams containing selected wood species in the tension zone using a four-point bending test. Three beam types were manufactured with respect to the timber used in the tension zone, i.e., beams containing oak or beech timber of I and II quality class and pine timber with no defects (as defects had been removed). The manufactured beams were assessed with respect to bending strength and the modulus of elasticity. The obtained results were compared with the performance of BSH (Industrial beams GL made in Germany—Brettschichtholz) industrial beams. We concluded that beams made from pine timber are an appropriate alternative to spruce beams. The static bending strength of the beams made with hardwood faces was 70% higher than that of beams made with pine wood. All types of beams manufactured in the laboratory met the requirements of at least the GL24c class.

18 November 2022 in Forests
Verified
Journal Article
Open access
PDF file
PBPiotr Boruszewski
Piotr Boruszewski
RARadosław Auriga
Radosław Auriga
Jacek WilkowskiJacek Wilkowski
Jacek Wilkowski
AAAlicja Auriga
Alicja Auriga
ATAdrian Trociński
Adrian Trociński
Seng Hua LeeSeng Hua Lee
Seng Hua Lee
Wood–plastic composites (WPCs) increase the range of applications of materials by creating new material solutions. As part of this research, PLA (polylactic acid)- and HDPE (high-density polyethylene)-based composites were manufactured. Softwood sawdust or conifer bark with different sizes (large and small) were used as filler. In selected cases, the addition of 3% additives, such as calcium oxide in the case of PLA or polyethylene-graft-maleic anhydride in the case of HDPE, were tested. The manufactured composites were examined for their density profile and their susceptibility to drilling, defined by the value of the axial force occurring during drilling. The obtained results revealed that the type of matrix had the greatest influence on the axial forces during drilling. Regardless of the composite formulation, composites based on PLA had 25% to 56% higher axial forces during drilling than those based on HDPE. Furthermore, increasing the proportion of lignocellulosic fillers resulted in a decrease in the value of axial forces during drilling, with PLA composites experiencing a greater decrease than HDPE composites. The type and size of the filler had a minor impact on the axial force values during drilling. The statistical analysis indicated that the additives had a greater influence on HDPE than on PLA.

2 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
Marek WieruszewskiMarek Wieruszewski
Marek Wieruszewski
ATAdrian Trociński
Adrian Trociński
JKJakub Kawalerczyk
Jakub Kawalerczyk
ADAdam Derkowski
Adam Derkowski
RMRadoslaw Mirski
Radoslaw Mirski
Pine timber of Polish origin intended for structural purposes is characterized by significant variability in the quality parameters. Technological suitability determined on the basis of relevant international classifications is based on the assessment of both selected mechanical and physical properties of wood. Moreover, the description of visual properties is also a valuable indicator regarding defect distribution. In the group of quality features playing a crucial role in the classification of sawn timber, there are knots, disruptions of grains, cracks, etc. Thus, the aim of the research was to determine the correlation between the presence of selected defects and the strength properties of individual timber pieces. This type of study is based on a nondestructive test method that allows for high optimization of sawn materials processing. In the case of sawn timber of Polish origin, the modulus of elasticity (MOE) determined using the sonic test is commonly used as a criterion. The research material was harvested from southern Poland. The results of the conducted studies confirmed a correlation between an increasing occurrence of particular types of defects and the results of MOE. Furthermore, as a result of the performed investigations, no significant effect of narrow surface cracks on strength properties was observed.

19 September 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ATAdrian Trociński
Adrian Trociński
Marek WieruszewskiMarek Wieruszewski
Marek Wieruszewski
MBMonika Bartkowiak
Monika Bartkowiak
DDDorota Dziurka
Dorota Dziurka
RMRadoslaw Mirski
Radoslaw Mirski
The modern construction industry is looking for new ecological materials (available, cheap, recyclable) that can successfully replace materials that are not environmentally friendly. Fibers of natural origin are materials that can improve the properties of gypsum composites. This is an important issue because synthetic fibers (hardly biodegradable—glass or polypropylene fibers) are commonly used to reinforce gypsum boards. Increasing the state of knowledge regarding the possibility of replacing synthetic fibers with natural fibers is another step towards creating more environmentally friendly building materials and determining their characteristics. This paper investigates the possibility of manufacturing fiber–gypsum composites based on natural gypsum (building gypsum) and hemp (Cannabis sativa L.) fibers grown in Poland. The effect of introducing hemp fibers of different lengths and with varying proportions of mass (mass of gypsum to mass of fibers) into the gypsum matrix was investigated. The experimental data obtained indicate that adding hemp fibers to the gypsum matrix increases the static bending strength of the composites manufactured. The highest mechanical strength, at 4.19 N/mm2, was observed in fiber–gypsum composites with 4% hemp fiber content at 50 mm in length. A similar trend of increased strength was observed in longitudinal tension. Again, the composite variant with 4% fiber content within the gypsum matrix had the highest mechanical strength. Manufacturing fibers–gypsum composites with more than 4% hemp fiber content negatively affected the composites’ strength. Mixing long (50 mm) hemp fibers with the gypsum matrix is technologically problematic, but tests have shown a positive effect on the mechanical properties of the refined composites. The article indicates the length and quantity limitations of hemp fibers on the basis of which fiber–gypsum composites were produced.

8 July 2021 in Forests
Verified
Journal Article
Open access
PDF file
RMRadoslaw Mirski
Radoslaw Mirski
ATAdrian Trociński
Adrian Trociński
JKJakub Kawalerczyk
Jakub Kawalerczyk
Marek WieruszewskiMarek Wieruszewski
Marek Wieruszewski
The process of sorting softwood raw materials is aimed at full automation. Techniques such as laser and optical scanning, used in measuring and sorting wood raw material with the layer of bark, are based on an analysis of the external shape of the log. The consequence of this is the use of constant ranges of bark deductions, which are often affected by errors resulting from averaging the values. The thickness of the bark is influenced by many factors, such as the tree species and the quality of habitat in which the trees have grown. In the case of pine wood, the range of adopted diametral intervals for the processed raw material plays a significant role. The analysis of the automatic sorting results showed numerous cases of a log-size mismatch. In methods that assume the measurement of wood with the bark, deductions for bark should be made based on experiments that take into account the raw resources base. Despite the high correlation between the size of the deduction and the average thickness of the bark (r = 0.85), the mean value of an error of the adjustment to the maximum thickness of the bark in the automatic sorting was 45%. The maximum bark thickness for the analyzed sorting intervals was correlated. The level of the correlation coefficient value was r = 0.72. In order to increase the accuracy of the sorting process, the value of the deduction for bark should be adjusted to the maximum values in each sorting group.