The wood industry faces challenges due to rising prices and limited wood availability, putting pressure on material efficiency in wood processing. This justifies the analysis of the relationship between efficiency and economy in pine wood processing. The study aimed to measure the impact of variations in the thickness of logs, changes in the technology of their further processing, and changes in prices of raw materials and products on the material efficiency in the context of large-scale production of furniture elements made of pinewood. The raw material input consisted of three categories of log sizes, from which the specialized purpose lumber was produced. The lumber was then processed into semi-finished furniture elements with three technologies: without detecting natural wood defects, with human detection, and with automatic detection. The study was conducted in Poland from 2020 to 2022. The material efficiencies in every stage of the analyzed wood processing and the cost efficiencies were calculated and analyzed based on the results obtained under real industrial conditions. The main findings are as follows: (1) when comparing the logs in the three tested diameter ranges (14–23 cm, 23–30 cm, and more than 30 cm), it can be observed that the overall material efficiency of sawing is in the range of 70%–85% and increases with the thickness of the log; (2) the share of 38 mm specialized sawn timber in the total amount of sawn timber was 41%–58% and increased with increasing log diameter; (3) the economic efficiency of the technological process is 170%–290%, based on the log size and the technology of further processing employed. The determining factor affecting cost efficiencies is unexpected changes in raw material prices and product demand in 2022. The findings suggest that while improvements in processing technology can boost efficiency, they cannot fully offset the rise in raw wood material prices.

The woodworking industry generates a great amount of bark which has not yet found a wider industrial application. None of the previously conducted research has considered oak bark application (which is one of the most often processed wood species in Poland) as a filler for wood adhesives. Moreover, no studies have determined the properties of bark containing melamine-urea-formaldehyde resin (MUF), which increasingly replaces pure urea-formaldehyde adhesives. Thus, the aim of the study was to determine the possibility of grinded oak bark application as a filler for MUF adhesive in plywood manufacturing. The chemical composition of oak bark was evaluated. Properties of liquid resins, such as viscosity, gel time, pH, and solid content, were determined. Chemical interaction between the filler and resin was assessed with using Fourier-transform infrared (FTIR) spectroscopy. Plywood panels manufactured using MUF adhesive filled with different bark concentrations (10%, 15%, 20%, 25%) were tested in terms of such properties as formaldehyde release and bonding quality. Studies have shown an improvement in liquid resin properties. The course of FTIR spectra did not explain the chemical interaction between the polymer and the filler. The addition of oak bark at a concentration of 15% made it possible to produce plywood panels characterized by reduced formaldehyde release and improved bonding quality.

One of the bases of the European policy and energy strategy is the biomass and bioenergy obtained from it. It is estimated that by 2023, the annual demand for biomass will have increased from the current level of 7 EJ to 10 EJ. There are significant differences between estimates of the bioenergy potential due to the fact that the authors of publications do not use consistent methodology and assumptions. Forest biomass, agricultural residues, and energy crops are the three main sources of biomass for energy production. Energy crops are likely to become the most important source of biomass. Land use and its changes are a key issue in the sustainable production of bioenergy as the availability of biomass determines its potential for energy security. This article is a review of the latest publications on the bioenergy potential of the member-states of the European Union. The consumption of energy and its potential were presented, with a special focus on renewable sources, especially biomass. The potential of biomass resources was presented and the types of biomass and its sources of origin were indicated. The research was conducted on the member-states of the European Union, whose policy is based on long-term development from the dependence on fossil resources to the dominance of renewable resources. As results from the research, in recent years, there has been a significant increase in the potential of both forest biomass (from 4.8 EJ per annum to the forecasted 15 EJ per annum) and agricultural biomass from (from 2.3 EJ per annum to the forecasted 7 EJ per annum). The increase in the demand for energy biomass in the EU member-states is balanced by partial imports from non-EU countries.

Emerging natural-based polymers and materials progress and new technology innovations open the way for unique food products with high nutritional value development. In this regard, oleogel may be essential in replacing fatty acids from food products. In this study, we researched the effects of varied soy lecithin (SYL) concentrations on the various physicochemical characteristics of soy wax (SW)/refined soybean oil (RSO) oleogels. These oleogels had a soft texture. The microscopic analysis of the oleogels suggested that the thickness, length, and density of the wax crystals (needle-shaped) varied as the SYL content was changed. Colorimetric analysis indicated that the oleogels were slightly yellowish. FTIR spectrometry helped analyze the functional groups of the raw materials and the oleogels. All the functional groups present in the raw materials could be accounted for within the oleogels. The only exception is the hydrogen-bonding peak in SW, which was not seen in the FTIR spectrum of the oleogels. It was found that at a critical SYL content, the oleogel showed a stable and repeatable wax network structure. This can be described by the presence of the uniformly distributed fat crystal network in the sample. The DSC analysis revealed that the oleogel samples were thermo-reversible, with their melting and crystallization temperatures ~43 °C and ~22 °C, respectively. In gist, it can be concluded that the incorporation of SYL can impact the color, wax crystal network characteristics, thermal characteristics, and mechanical characteristics of the oleogels in a composition-dependent manner.

The study assessed the quality of pine lumber by marking the modulus of elasticity in the horizontal system. The research material was a plank with the following dimensions: 137 mm wide × 39.50 mm thick × 3485 mm long. The pine wood was obtained by sawing timber in the form of logs with round cross sections and originating from the Forest Division Olesno (50°52′30″ N, 18°25′00″ E). Each long log was sawn to provide four logs of about 3.5 m, which were marked as butt-end logs (O), middle logs (S)—2 items, and top logs (W). The origin of the logs from the trunk (Pinus sylvestris L.) has a significant impact on the physical and mechanical properties of the wood from which they are made. Only butt-end logs (log type O) allows for the production of high-quality timber elements. The pine timber that was evaluated in this paper had a high density of about 570 kg/m³ and a high percentage of timber items were assigned to class C24 and higher (above 50%). The adopted horizontal model of evaluation of the modulus of elasticity gave similar results to those obtained in an evaluation according to the EN-408.