Oxygen vacancies are a major factor that controls the electrical characteristics of the amorphous indium-gallium-zinc oxide transistor (a-IGZO TFT). Oxygen vacancies are affected by the composition ratio of the a-IGZO target and the injected oxygen flow rate. In this study, we fabricated three types of a-IGZO TFTs with different oxygen flow rates and then investigated changes in electrical characteristics. Atomic force microscopy (AFM) was performed to analyze the surface morphology of the a-IGZO films according to the oxygen gas rate. Furthermore, X-ray photoelectron spectroscopy (XPS) analysis was performed to confirm changes in oxygen vacancies of a-IGZO films. The optimized a-IGZO TFT has enhanced electrical characteristics such as carrier mobility (μ) of 12.3 cm2/V·s, on/off ratio of 1.25 × 1010 A/A, subthreshold swing (S.S.) of 3.7 V/dec, and turn-on voltage (Vto) of −3 V. As a result, the optimized a-IGZO TFT has improved electrical characteristics with oxygen vacancies having the highest conductivity.
Metal oxide semiconductors, such as indium gallium zinc oxide (IGZO), have attracted significant attention from researchers in the fields of liquid crystal displays (LCDs) and organic light-emitting diodes (OLEDs) for decades. This interest is driven by their high electron mobility of over ~10 cm2/V·s and excellent transmittance of more than ~80%. Amorphous IGZO (a-IGZO) offers additional advantages, including compatibility with various processes and flexibility making it suitable for applications in flexible and wearable devices. Furthermore, IGZO-based thin-film transistors (TFTs) exhibit high uniformity and high-speed switching behavior, resulting in low power consumption due to their low leakage current. These advantages position IGZO not only as a key material in display technologies but also as a candidate for various next-generation electronic devices. This review paper provides a comprehensive overview of IGZO-based electronics, including applications in gas sensors, biosensors, and photosensors. Additionally, it emphasizes the potential of IGZO for implementing logic gates. Finally, the paper discusses IGZO-based neuromorphic devices and their promise in overcoming the limitations of the conventional von Neumann computing architecture.
20 December 2018 in Transactions of the Korean Society for Noise and Vibration Engineering
This study presents the performance evaluation of an ultrasonic vibrator for uniform atomization that can be applicable to conformal coating control in the light-emitting diode manufacturing process or wall-wetting control in fuel injection of vehicle engines. To achieve this goal, an ultrasonic vibrator was devised utilizing piezoelectric actuators to have longitudinal motion. After analytically analyzing the standing waves of the proposed ultrasonic vibrator, the concentrator horn of the vibrator was designed, and its design parameters were finally determined by a modal analysis through the finite element method. The uniform atomization properties of the sprayed droplets from the vibrator were evaluated by a fluid dynamics analysis using ANSYS FLUENT. To evaluate the effectiveness, the designed vibrator was manufactured, and the generated sound pressure level was measured. Subsequently, uniform atomization performances were experimentally demonstrated using the vibrator to uniformly conformal coat a light-emitting diode.