Cable-driven manipulators, characterized by slender arms, dexterous motion, and controllable stiffness, have great prospects for application to capture on-orbit satellites. However, it is difficult to achieve effective motion planning and stiffness control of cable-driven manipulators because of the coupled relationships between cable lengths, joint angles, and reaction forces. Therefore, a convolutional dynamic-jerk-planning algorithm is devised for impedance control of variable-stiffness cable-driven manipulators. First, a variable-stiffness cable-driven manipulator with universal modules and rotary quick-change modules is designed to overcome difficulties related to disassembly, installation, and maintenance. Second, a convolutional dynamic-jerk-planning algorithm is devised to overcome the discontinuity and shock problems of the manipulator’s velocity during intermittent control processes. The algorithm can also make acceleration smooth by setting jerk dynamically, reducing acceleration shock and ensuring the stable movement of the cable-driven manipulator. Third, the stiffness of the cable-driven manipulator is further optimized by compensating for the position and velocity of drive cables by employing position-based impedance control. Finally, the prototype of the variable-stiffness cable-driven manipulator is developed and tested. The convolutional dynamic-jerk-planning algorithm is used to plan the desired velocity curves for velocity control experiments of the cable-driven manipulator. The results verify that the algorithm can improve the acceleration smoothness, thereby making movement smooth and reducing vibrations. Furthermore, stiffness control experiments verify that the cable-driven manipulator has ideal variable stiffness capabilities.
Significant vibrations of the traction wire rope can impact the efficiency and accuracy of static testing in wind turbine blade assessments. This study focuses on the vibration characteristics of the wire rope under static loading conditions. A simulation model for single-point static tests of wind turbine blades was developed using Adams software and validated through wire rope tension and longitudinal acceleration measurements during static tests on a full-scale 71.5-m blade. The validated model was used to analyze the effects of wire rope span and pulley position on vibration amplitude and tension in single-point loading scenarios. The results show that increasing the wire rope span and the distance between the pulley and blade fixture significantly amplifies vibration. Adjusting the span of the wire rope and the pulley position causes the primary vibration frequency to approach the natural frequency, leading to a substantial increase in vibration near the resonance frequency. To avoid resonance and reduce vibration, it is recommended to use two misaligned ground tracks, ensuring the wire rope span does not exceed 30 m and the distance between the pulley and blade fixture does not exceed 7 m. Specific resonance combinations of wire rope span and pulley position should be avoided to improve the precision and reliability of the testing system.
In order to explore the mechanical properties, failure mode, and damage evolution process of pultruded sheets for wind turbine blades, a tensile testing machine for pultruded sheets for wind turbine blades was built, and the hydraulic system, mechanical structure, and control scheme of the testing machine were designed. The feasibility of the mechanical structure was verified by numerical simulation, and the control system was simulated by MATLAB software. Then, based on the built testing machine, the static tensile test of the pultruded sheet was carried out to study the mechanical properties and failure mode of the pultruded sheet. Finally, an infrared thermal imager was used to monitor the temperature change on the surface of the test piece, and the temperature change law and damage evolution process of the test piece during the whole process were studied. The results show that the design scheme of the testing machine was accurate and feasible. The maximum stress occurred in the beam after loading the support, the maximum stress was 280.18 MPa, and the maximum displacement was 0.665 mm, which did not exceed its structural stress-strain limit. At the same time, the control system met the test requirements and had a good follow-up control effect. The failure load of the pultruded sheet was 800 kN. The failure deformation form included three stages of elasticity, yield, and fracture, and the finite element analysis data were in good agreement with the test results. The failure modes were fiber breakage, delamination, and interfacial debonding. The surface temperature of the specimen first decreased linearly, and then continued to increase. The strain and temperature trend were consistent with time.
The static loading test is crucial in verifying the reliability of a large wind turbine blade's structure and guiding its design. However, the drastic wire rope flutter amplitude during the test can lead to significant errors in the loading test results. The paper presents a mathematical model of wire rope flutter based on Hamilton's principle. It uses Adams software to establish a simulation model of a 123m blade static loading test system. The paper analyses the influence of wire rope span, dynamic pulley position, and winch speed on the wire rope flutter characteristics. The results show that for a 123m blade, the amplitude of the wire rope vibration can be reduced by reducing the transverse span of the wire rope to 13m, adjusting the position of the movable pulley as close as possible to the blade, and maintaining a smooth winch speed of 2r/min. It provides theoretical support and operational guidance for static load testing of large wind turbine blades.