HARIHARAN TRIPLICANE DWARAKANATHAN

Dr. HARIHARAN TRIPLICANE DWARAKANATHAN

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2022 in Arthroplasty Today
Verified
Journal Article
Open access
AOAnil Thomas Oommen
Anil Thomas Oommen
HDHARIHARAN TRIPLICANE DWARAKANATHAN
HARIHARAN TRIPLICANE DWARAKANATHAN
MKMadhavi Kandagaddala
Madhavi Kandagaddala
VCViruthipadavil John Chandy
Viruthipadavil John Chandy
PPPradeep Mathew Poonnoose
Pradeep Mathew Poonnoose
ASA. Arun Shankar
A. Arun Shankar
Fused hips with spine stiffness in ankylosing spondylitis (AS) reduce spinopelvic mobility. We aimed to assess spinopelvic mobility pattern and acetabular anteversion in AS after total hip arthroplasty (THA). Ninety-four stiff hips in 58 AS individuals (mean age: 37.05) who underwent THA between 2012 and 2018 with a modified lateral approach were included. Twenty-three hips were fused, and 71 hips had mean flexion of 37.67°. Pelvic tilt, pelvic inclination, sacral slope (SS), and lumbar lordosis were correlated with THA, and functional outcomes were assessed at 34.6-month mean follow-up. Thirty-seven had a stuck sitting pattern with stuck standing seen in 4 individuals. SS standing before and after THA were 25.08° and 27.30°. SS sitting was 8.99° compared to 16.80°. SS from sitting to standing was reduced (17.7°) in 17 individuals. Spine stiffness in extension was seen in 4 out of 37. Mean acetabular inclination after THA was 42.67°, and acetabular anteversion was 17.48°. Flexion after THA improved to mean 98.47°. Changes in SS from sitting to standing were correlated with THA (r-value: 0.93, P-value: .0001). The Harris Hip Score improved from 25.31 to 82.39 (P-value <.05), and the mean 12-item Short Form Survey at review was 52.18 and 59.55 (physical and mental components). The mean Western Ontario and Mc Master Universities Arthritis Index score was 17.56. Spinopelvic mobility change was <10° after THA in AS, stuck sitting was seen in 37 of 58 (63.8%), and stuck standing was seen in 4 of 58 (6.9%), including spine stiffness in flexion or extension. Acetabular anteversion assessed was 17.48° (standard deviation: 4.41), with significant functional improvement. Level 4.

30 May 2025 in Current Oncology
Verified
Journal Article
Open access
PDF file
VSVidhi Saraf
Vidhi Saraf
HDHARIHARAN TRIPLICANE DWARAKANATHAN
HARIHARAN TRIPLICANE DWARAKANATHAN
AAAl-Muaayad Al-Abri
Al-Muaayad Al-Abri
INIoanna Nixon
Ioanna Nixon
SVSarah Vaughan
Sarah Vaughan
SGSanjay Gupta
Sanjay Gupta
Background: Desmoid fibromatosis (DF) is a rare, locally aggressive soft tissue tumour with unpredictable clinical behaviour. Historically, treatment has involved surgery; however, contemporary guidelines, such as those from the Desmoid Tumour Working Group, advocate active surveillance. This article reviews current perspectives on DF, focusing on epidemiology, pathogenesis, treatment strategies, emerging research directions and cost effectiveness based on our experience at the West of Scotland Musculoskeletal Oncology Service, Glasgow Royal Infirmary (GRI). Methodology: We reviewed 101 patients diagnosed with desmoid fibromatosis between 2010 and 2024. A review of patient records was conducted to gather information on demographics, date of diagnosis, prior treatment, treatment initiation, intervention types, imaging intervals, follow-up duration, recurrence rate for surgery and other intervention, and discharge timelines. All data was systematically organized and analyzed to assess our outcomes. Results: Out of 101 patients with DF in the study, 66% were females. The most common site of primary tumour was lower extremity (39.6%) followed by near equal distribution in upper extremity and trunk. Out of the total cases, 72 (71.2%) were successfully managed with active surveillance involving serial imaging and clinical reviews in accordance with European guidelines. A total of 22 patients (21%) received treatment: 10 underwent surgery alone, 2 had surgery combined with radiotherapy, 8 received only radiotherapy, 1 was treated with hormonal therapy and 1 participated in a trial with Nirogacestat. Of the seven remaining patients, six had unplanned surgery outside followed by active surveillance at GRI. One patient was on alternative treatment modality, homeopathy. The average number of MRI scans per patient was 3.11, with many patients requiring significantly more imaging. MRI surveillance varies significantly in desmoid tumours due to their heterogeneous behaviour. Active or symptomatic tumours often require more frequent scans (every 3–6 months), while stable cases may need only imaging annually or just clinical monitoring. Recurrence was noted in eight patients, all of which were related to prior surgery. The total combined cost of imaging and appointments exceeds £6500 per patient in active surveillance. Conclusions: We conclude that most patients with desmoid fibromatosis in our cohort were effectively treated with active surveillance, consistent with current European guidelines. Surgical management of desmoid fibromatosis in our cohort is historic and has shown a significant recurrence risk. Our study proposes a revised follow-up protocol that significantly reduces costs without compromising on patient care. We suggest a two-year surveillance period for stable disease with patient-initiated return to reduce unnecessary clinic visits, imaging and healthcare costs.

3 July 2020 in bioRxiv
Verified
Preprint
Open access
PDF file
NRNaveen Kumar Devanga Ragupathi
Naveen Kumar Devanga Ragupathi
DSDhiviya Prabaa Muthuirulandi Sethuvel
Dhiviya Prabaa Muthuirulandi Sethuvel
HDHARIHARAN TRIPLICANE DWARAKANATHAN
HARIHARAN TRIPLICANE DWARAKANATHAN
DMDhivya Murugan
Dhivya Murugan
YUYamini Umashankar
Yamini Umashankar
BVBalaji Medical Veeraraghavan
Balaji Medical Veeraraghavan
Klebsiella pneumoniae is one of the leading causes of nosocomial infections. Carbapenem-resistant (CR) K. pneumoniae are on the rise in India. The biofilm forming ability of K. pneumoni ae further complicates patient management. There is still a knowledge gap on the association of biofilm formation with patient outcome and carbapenem susceptibility, which is investigated in the present study. K. pneumoniae isolates from patients admitted in critical care units with catheters and ventilators were included. K. pneumoniae ( n = 72) were tested for antimicrobial susceptibility as recommended by CLSI 2019 and subjected to 96-well microtitre plate biofilm formation assay. Based on optical density at 570 nm isolates were graded as strong, moderate and weak biofilm formers. Subset of strong biofilm formers were subjected to whole genome sequencing and a core genome phylogenetic analysis in comparison with global isolates were performed. Biofilm formation was compared for an association with the carbapenem susceptibility and with patient outcome. Statistical significance, correlations and graphical representation were performed using SPSS v23.0. Phenotypic analyses showed a positive correlation between biofilm formation and carbapenem resistance. Planktonic cells observed to be susceptible in vitro exhibited higher MICs in biofilm structure. The biofilm forming ability had a significant association with the morbidity/mortality. Infections by stronger biofilm forming pathogens significantly (P<0.05) resulted in fewer ‘average days alive’ for the patient (3.33) in comparison to those negative for biofilms (11.33). Phylogenetic analysis including global isolates revealed the clear association of sequence types with genes for biofilm mechanism and carbapenem resistance. Carbapenemase genes were found specific to each clade. The known hypervirulent clone-ST23 with wcaG , magA , rmpA , rmpA2 and wzc with a lack of mutation for hyper-capsulation might be poor biofilm formers. Interestingly, ST15, ST16, ST307 and ST258 – reported global high-risk clones were wcaJ negative indicating the high potential of biofilm forming capacity. Genes wabG and treC for CPS, bcsA and pgaC for adhesins, luxS for quorum sensing were common in all clades in addition to genes for aerobactin ( iutA ), allantoin ( allS ), type I and III fimbriae ( fimA , fimH , mrkD ) and pili ( pilQ , ecpA ). This study is the first of its kind to compare genetic features of antimicrobial resistance with a spectrum covering most of the genetic factors for K. pneumoniae biofilm. These results highlight the importance of biofilm screening to effectively manage nosocomial infections by K. pneumoniae . Further, data obtained on epidemiology and associations of biofilm and antimicrobial resistance genetic factors will serve to enhance our understanding on biofilm mechanisms in K. pneumoniae .

9 August 2021 in Indian Journal of Orthopaedics
Verified
Journal Article
Closed access
PDF file
RGRahul George
Rahul George
VCV. J. Chandy
V. J. Chandy
ACA. I. Christudoss
A. I. Christudoss
HDHARIHARAN TRIPLICANE DWARAKANATHAN
HARIHARAN TRIPLICANE DWARAKANATHAN
AAA. ArunShankar
A. ArunShankar
PPPradeep Mathew Poonnoose
Pradeep Mathew Poonnoose

Verified
Journal Article
Open access
PDF file
HDHARIHARAN TRIPLICANE DWARAKANATHAN
HARIHARAN TRIPLICANE DWARAKANATHAN
NGNatalie Maria Green
Natalie Maria Green
THThomas Haider
Thomas Haider
IPIosif Pagkalos
Iosif Pagkalos
GMGuy Morris
Guy Morris
LJLee Jeys
Lee Jeys
This is a retrospective, single-center cohort study comparing the long-term radiographic osseointegration and aseptic loosening between a 3D-printed EPORE® collar and a prior generation HA-coated collar in endoprosthetic reconstructions. Achieving stable bone integration in endoprosthetic reconstructions remains challenging, with hydroxyapatite (HA)-coated collars being the only option available in the past. Earlier studies from our center have shown reliable and accelerated osseointegration at the bone–collar interface using a novel highly porous 3D-printed EPORE® collar system compared to a previously used HA-coated collar. Methods: Twenty-eight patients who underwent an implantation of endoprostheses utilizing the novel 3D-printed EPORE® collar system were case-matched to 24 patients who had previously undergone surgeries using a HA-coated collar. The mean age at surgery was 65.2 years (range: 17–95 years). Patients in the HA-coated collar group had a mean age of 63.8 years (range: 17–86 years), while those in the 3D-printed collar group had a mean age of 66.7 years (range: 32–95 years), with no statistically significant difference between groups (p = 0.876). A minimum radiological and clinical follow-up of 2 years was available in all included cases. Osseointegration was evaluated using postoperative plain radiographs in two planes based on a previously validated semi-quantitative score. Results: When aseptic loosening was used as the primary endpoint, no failures occurred in the 3D-printed EPORE® group during the study period. The overall rate of stem loosening (including both aseptic and septic causes) was 7% (2/28) in the 3D-printed group and 16% (4/24) in the HA-coated group. All cases of loosening in the 3D-printed cohort were related to septic failure. This translates into a 2-year aseptic-loosening-free survival of 100% in the 3D-printed group. When the radiographic osseointegration was analyzed as the endpoint, the rate of successful osseointegration was significantly higher in the 3D-printed group (92.9%, 26/28; 95% CI 76.5–99.1%) compared with the HA-coated group (70.8%, 17/24; 95% CI 48.9–87.4%; p = 0.04). The distribution of ongrowth scores also differed significantly between groups. The highest ongrowth score (grade 4) was achieved in 82.14% of 3D-printed implants (23/28; 95% CI 63.1–93.9%), compared with 37.5% of HA-coated implants (9/24; p = 0.0002). The time to achieve grade 4 ongrowth was significantly shorter in the 3D-printed cohort, with a median of 470 days (IQR 360–610), compared with 1482 days (IQR 1020–1860) in the HA-coated group (p < 0.0001). In addition, patients in the 3D-printed implant group had a significantly higher mean body mass index compared with the HA-coated group (32.51 vs. 28.36, p = 0.01). Conclusions: These results show that the novel highly porous 3D-printed EPORE® collars reduce aseptic loosening and accelerate extracortical bridging in endoprosthetic replacements. This benefit persisted even in higher BMI or revision contexts when compared to the previously used HA-coated collars.

20 November 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
HDHARIHARAN TRIPLICANE DWARAKANATHAN
HARIHARAN TRIPLICANE DWARAKANATHAN
NGNatalie Maria Green
Natalie Maria Green
THThomas Haider
Thomas Haider
IPIosif Pagkalos
Iosif Pagkalos
GMGuy Morris
Guy Morris
LJLee Jeys
Lee Jeys
Achieving stable bone integration in megaprosthetic reconstructions remains challenging, with traditional hydroxyapatite (HA)-coated collars showing variable outcomes. This study compares long-term osseointegration and clinical performance of a novel 3D-printed porous collar (EPORE®) versus conventional HA-coated collars in 52 patients (28 with 3D-printed, 24 with HA-coated). Radiographic osseointegration was assessed using a validated scoring system, with follow-up exceeding two years. The 3D-printed group demonstrated significantly higher osseointegration rates (92.9% vs. 70.8%, p=0.04) and faster bone ongrowth (470 vs. 1482 days to full integration, p<0.0001), with 89.3% achieving the highest integration score compared to 37.5% in the HA group (p=0.0002). Notably, no aseptic loosening occurred with 3D-printed collars, while HA-coated collars had an 8% aseptic loosening rate. Despite higher BMI in the 3D-printed group (32.5 vs. 28.4, p=0.01), outcomes were superior, suggesting the porous design mitigates obesity-related risks. These findings indicate that 3D-printed collars enhance biological fixation, reduce loosening, and improve implant stability, particularly in complex revisions. This technology represents a significant advancement in megaprosthetic design, with potential to improve long-term outcomes in high-risk patients.