In this work, the peculiarities of microstructure changes in Cr-coated Zr1%Nb alloy under high-temperature hydrogenation and Kr ion irradiation were investigated. A comprehensive analysis revealed that Cr coating reduces the thickness of the Kr+ radiation damage zone by 15%–20% and decreases the density of radiation-induced defects compared to that of uncoated Zr1%Nb alloy. Additionally, Cr-coated samples exhibit a more uniform hydrogen distribution. According to first-principles calculations and positron annihilation spectroscopy, hydrogen-free dislocations predominate in the Cr-coated Zr1%Nb alloy after hydrogenation and irradiation. These findings emphasize the protective role of Cr coatings in mitigating radiation damage and hydrogen embrittlement in zirconium alloys.
In this work, experimental and theoretical studies were performed to investigate the formation of core–shell structured nanoparticles of MgH₂ with addition of MIL–101 (Cr) and EEW Ni and Al nanopowders to reveal the influence of nanosized additives on magnesium hydride sorption characteristics. It is proven, that the formation of core–shell structured nanoparticles with crystalline MgH₂ the core in case of all of the considered additives is a result of milling in a planetary mill. The values of specific surface area are significantly higher for MgH₂–Metal composites in comparison to pure MgH₂. It is suggested, that the formation of Cr particles should occur with greater probability than of Ni or Al. These additives are more likable to scatter on the surface of MgH₂ as single adsorbed atoms in comparison to Cr. Introduction of single adsorbate atoms of Al, Cr or Ni is capable of changing the hydrogen–metal bonding strength on MgH₂ surface. The sorption and desorption of hydrogen for all of the considered composites is observed at temperatures lower than that of pure MgH₂, these results are obtained through PCT curves analysis. Activation energies of both sorption and desorption, calculated within JMAK model, are higher for pure magnesium hydride than for each considered MgH₂–Metal composite. The decline in these values in comparison to the pure MgH₂ for sorption and desorption respectively is ~30% and ~44% for MgH₂-MIL-101(Cr) composite, ~45% and ~60% for MgH₂-nanoAl composite and ~66% and ~76% for MgH₂-nanoNi composite. This shows the improvement on the hydrogen sorption kinetics for the modified samples. The presence of hydrogen pump effect is proven in case of Ni through estimating the shift in Avrami constant.
The composite material MgH₂-EEWNi-Cr (20 wt. %) with a hydrogen content of 5.2 ± 0.1 wt. % is characterized by improved hydrogen interaction properties compared to the original MgH₂. The dissociation of the material occurs in three temperature ranges (86-117, 152-162, 281-351 °C), associated with a complex of effects consisting of changes in the specific surface area of the material, alterations in the crystal lattice during ball milling, and changes in the electronic structure in the presence of a Ni-Cr catalyst, based on first-principles calculations. The decrease in desorption activation energy (Ed = 65-96 ± 1 kJ/mol, ΔEd = 59-90 kJ/mol) is due to the catalytic effect of Ni-Cr, leading to a faster decomposition of the hydride phase. Based on the results of ABINIT calculations, Ni-Cr on the MgH₂ surface leads to a significant decrease in hydrogen binding energy (ΔEb = 60%) compared to pure magnesium hydride due to the formation of Ni–H and Cr–H covalent bonds, which reduces the degree of H–Mg ionic bonding. The results obtained allow us to expand our understanding of the mechanisms of hydrogen interaction with storage materials and the possibility of using these as mobile hydrogen storage and transportation materials.
The composite material MgH2-EEWNi-Cr (20 wt. %) with a hydrogen content of 5.2 ± 0.1 wt.% is characterized by improved hydrogen interaction properties compared to the original MgH2. The dissociation of the material occurs in three temperature ranges (86–117, 152–162, and 281–351 °C), associated with a complex of effects consisting of changes in the specific surface area of the material, alterations in the crystal lattice during ball milling, and changes in the electronic structure in the presence of a Ni–Cr catalyst, based on first-principles calculations. The decrease in desorption activation energy (Ed = 65–96 ± 1 kJ/mol, ΔEd = 59–90 kJ/mol) is due to the catalytic effect of N–Cr, leading to a faster decomposition of the hydride phase. Based on the results of ab initio calculations, Ni–Cr on the MgH2 surface leads to a significant decrease in hydrogen binding energy (ΔEb = 60%) compared to pure magnesium hydride due to the formation of Ni–H and Cr–H covalent bonds, which reduces the degree of H–Mg ionic bonding. The results obtained allow us to expand our understanding of the mechanisms of hydrogen interaction with storage materials and the possibility of using these as mobile hydrogen storage and transportation materials.