In addition to the use of reference instruments, low-cost sensors (LCSs) are becoming increasingly popular for air quality monitoring both indoors and outdoors. These sensors provide real-time measurements of pollutants and facilitate better spatial and temporal coverage. However, these simpler devices are typically characterised by lower accuracy and precision and can be more sensitive to the environmental conditions than the reference instruments. It is therefore crucial to characterise the applicability and limitations of these instruments, for which a possible solution is their comparison with reference measurements in real-world conditions. To this end, a measurement campaign has been carried out to evaluate the PM2.5 readings of several low- and medium-cost air quality instruments of different types and categories (IQAir AirVisual Pro, TSI DustTrak™ II Aerosol Monitor 8532, Xiaomi Mijia Air Detector, and Xiaomi Smartmi PM2.5 Air Detector). A GRIMM EDM180 instrument was used as the reference. This campaign took place in Budapest, Hungary, from 12 November to 15 December 2020, during typically humid and foggy weather conditions, when the air pollution level was high due to the increased anthropogenic emissions, including wood burning for heating purposes. The results indicate that the individual sensors tracked the dynamics of PM2.5 concentration changes well (in a linear fashion), but the readings deviated from the reference measurements to varying degrees. Even though the AirVisual sensors performed generally well (0.85 < R2 < 0.93), the accuracy of the units showed inconsistency (13–93%) with typical overestimation, and their readings were significantly affected by elevated relative humidity levels and by temperature. Despite the overall overestimation of PM2.5 by the Xiaomi sensors, they also exhibited strong correlation coefficients with the reference, with R2 values of 0.88 and 0.94. TSI sensors exhibited slight underestimations with high explained variance (R2 = 0.93–0.94) and good accuracy. The results indicated that despite the inherent bias, the low-cost sensors are capable of capturing the temporal variability of PM2.5, thus providing relevant information. After simple and multiple linear regression-based correction, the low-cost sensors provided acceptable results. The results indicate that sensor data correction is a necessary prerequisite for the usability of the instruments. The ensemble method is a reasonable alternative for more accurate estimations of PM2.5.
In recent years, with the growing proliferation of photovoltaics (PV), accurate nowcasting of PV power has emerged as a challenge. Global horizontal irradiance (GHI), which is a key factor influencing PV power, is known to be highly variable as it is determined by short-term meteorological phenomena, particularly cloud movement. Deep learning and computer vision techniques applied to all-sky imagery are demonstrated to be highly accurate nowcasting methods, as they encode crucial information about the sky’s state. While these methods utilize deep neural network models, such as Convolutional Neural Networks (CNN), and attain high levels of accuracy, the training of image-based deep learning models demands significant computational resources. In this work, we present a computationally economical estimation technique, based on a deep learning model. We utilize both all-sky imagery and meteorological data, however, information on the sky’s state is encoded as a feature vector extracted using traditional image processing methods. We introduce six all-sky image features utilizing detailed knowledge of meteorological and physical phenomena, significantly decreasing the amount of input data and model complexity. We investigate the accuracy of the determined global and diffuse radiation for different combinations of meteorological parameters. The model is evaluated using two years of measurements from an on-site all-sky camera and an adjacent meteorological station. Our findings demonstrate that the model provides comparable accuracy to CNN-based methods, yet at a significantly lower computational cost.
The aim of this study was to provide particle number and mass deposition rates of submicron particles in the human airways as inputs for toxicology and other areas of aerosol science. Scanning Mobi...
Public opinion significantly influences discussions on the selection of technologies for future energy systems. Our goal was to support the development of energy scenarios by evaluating decision-making criteria and energy-production alternatives at a national level. The importance of the criteria and the determination of energy-production preferences were based on a social survey conducted in European countries. However, public opinions on specific technologies are frequently based on limited knowledge and can vary depending on the context. In our study, we analyzed the comparative data sets from an international survey on energy sources using three approaches: direct ranking, a comparison using various criteria, and classifying the knowledge of technologies. The evaluated results not only provide an excellent opportunity for the development of energy scenarios but also enable policymakers to develop more effective communication strategies to inform the public about technological choices and raise awareness of the need for modifications to the energy system.
The accelerating global energy transition underscores the crucial role of societal perceptions and knowledge in the acceptance of sustainable energy technologies. This study assesses the accuracy of self-assessed knowledge of seven energy production alternatives—solar, wind, hydropower, gas, nuclear fission, and fusion—across four complex criteria (economy, environment, safety, and reliability) based on a large-scale European survey (n = 19,144). Their assessments were contrasted with literature-based reference values through a multi-criteria evaluation approach. Results reveal that public knowledge is most accurate for long-established technologies such as hydropower, gas, and nuclear, while knowledge of renewable and emerging technologies (wind, solar, and fusion) is less accurate. The decomposition of the four complex criteria revealed that public evaluations are predominantly influenced by single indicators: fixed costs for the economic criterion, air pollution for the environmental dimension, accident risk for safety, and flexibility or availability factor for reliability. Average self-assessed knowledge levels were relatively homogeneous across Europe (2.6–3.1 on a five-point scale), yet the correlation between perceived and actual knowledge accuracy was weak. In just over half of the countries, lower knowledge levels corresponded to greater self-assessment errors, while in others, no clear trend emerged. These findings underscore the importance of improving societal understanding of renewable and novel energy sources and strengthening knowledge dissemination to support the transition toward sustainable energy systems.
Previous studies have shown the value-action gap between radon awareness and actually conducting a radon test or applying mitigation actions. Citizen science, an approach by which the public works together with radon experts during the research process, might help to increase not only knowledge but also protective actions. This chapter explores the extent to which citizen science can contribute to increasing radon testing and mitigation rates through the analysis of four pilot citizen science projects in the framework of the Horizon 2020 RadoNorm European research project (2020–2025). The citizen science pilot projects were accomplished in France, Hungary, Ireland and Norway in a period of six months during the years 2021 to 2022. The results show that citizen science holds promise for promoting radon testing and radon mitigation. Our study contributes to a better understanding of the potential of citizen science in radon management as a means to reduce lung cancer risk. <!----> <!----> <!----> <!---->