Ultrasound is widely used for tissue imaging such as breast cancer diagnosis; however, fundamental challenges limit its integration with wearable technologies, namely, imaging over large-area curvilinear organs. We introduced a wearable, conformable ultrasound breast patch (cUSBr-Patch) that enables standardized and reproducible image acquisition over the entire breast with less reliance on operator training and applied transducer compression. A nature-inspired honeycomb-shaped patch combined with a phased array is guided by an easy-to-operate tracker that provides for large-area, deep scanning, and multiangle breast imaging capability. The in vitro studies and clinical trials reveal that the array using a piezoelectric crystal [Yb/Bi-Pb(In _{1 /2} Nb _1/2 )O ₃ -Pb(Mg _{1/ 3} Nb _2/3 )O ₃ -PbTiO ₃ ] (Yb/Bi-PIN-PMN-PT) exhibits a sufficient contrast resolution (~3 dB) and axial/lateral resolutions of 0.25/1.0 mm at 30 mm depth, allowing the observation of small cysts (~0.3 cm) in the breast. This research develops a first-of-its-kind ultrasound technology for breast tissue scanning and imaging that offers a noninvasive method for tracking real-time dynamic changes of soft tissue.

Identification technology based on biometrics is a branch of research that employs the unique individual traits of humans to authenticate identity, which is the most secure method of identification based on its exceptional high dependability and stability of human biometrics. Common biometric identifiers include fingerprints, irises, and facial sounds, among others. In the realm of biometric recognition, fingerprint recognition has gained success with its convenient operation and fast identif ication speed. Different fingerprint collecting techniques, which supply fingerprint information for fingerprint identification systems, have attracted a significant deal of interest in authentication technology regarding fingerprint identification systems. This work presents several fingerprint acquisition techniques, such as optical capacitive and ultrasonic, and analyzes acquisition types and structures. In addition, the pros and drawbacks of various sensor types, as well as the limits and benefits of optical, capacitive, and ultrasonic kinds, are discussed. It is the necessary stage for the application of the Internet of Things (IoT).

Ga₂O₃ thin films were fabricated by the electron-beam evaporation technique at a varying oxygen partial pressure from 0 to 2.0 × 10⁻² Pa. The effect of oxygen partial pressure on the crystalline structure and optical properties of the Ga₂O₃ films was analyzed using sophisticated techniques including X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, spectroscopic ellipsometry, ultraviolet-visible spectroscopy and a laser-induced damage test system. The correlation between the oxygen partial pressure and the film’s properties in optics and materials were investigated. XRD and Raman revealed that all films were amorphous in spite of applying a varying oxygen partial pressure. With the change of oxygen partial pressure, XPS data indicated that the content of oxygen in the Ga₂O₃ films could be broadly modulable. As a result, a changeable refractive index of the Ga₂O₃ film is realizable and a variable blue-shift of absorption edges in transmittance spectra of the films is achievable. Moreover, the damage threshold value varied from 0.41 to 7.51 J/cm² according to the rise of oxygen partial pressure. These results demonstrated that the optical properties of Ga₂O₃ film can be broadly tunable by controlling the oxygen content in the film.

To obtain a high-performance surface acoustic wave (SAW) gyroscope substrate, the propagation characteristics and gyroscopic effect of Rayleigh waves in a 128°Y–X LiNbO₃/SiO₂/Si (LNOI) functional substrate were investigated with a three-dimensional finite element method. The influence of LNOI structural parameters on Rayleigh wave characteristics, including the phase velocity (v_p), electromechanical coupling coefficient (K²) and temperature coefficient of frequency (TCF), were analyzed. The results demonstrate that the SiO₂ layer compensates for the negative TCF of 128°Y–X LiNbO₃ and enhances the K² of the LNOI substrate. The Rayleigh wave velocity change of the LNOI substrate after rotations in different directions was studied. The gyroscope gain factor (η) represents the strength of the gyroscopic effect in the differential traveling wave SAW gyroscope and is defined. The η_y and η_z of the LNOI substrate with different structural parameters were investigated. Finally, an LNOI substrate with an h_LN/λ of 0.2 and an h_SiO2/λ of 0.05 was obtained by balancing the characteristic parameters, with a K² of 3.96%, TCF of −18.75 ppm/°C and η_y of 0.26. The LNOI substrate has a better gyroscopic effect and temperature stability than the 128°Y–X LiNbO₃ crystal. The LNOI substrate meets device miniaturization and integration needs.