The creation of heat-resistant polymers represents one of the most significant challenges and priorities in contemporary scientific research. The incorporation of a filler of analogous nature and content into disparate types of resins will facilitate the identification of the relationship between properties and the structure of macromolecular chains in synthetic resins that function as composite matrices. The objective of this study was to ascertain the impact of lignin at 5 and 15% by weight on the thermal degradation of two resin-based composites with disparate structural compositions. The thermal decomposition products of the composites were determined by the method of temperature-programmed desorption mass spectroscopy (TPD MS). The thermal oxidative degradation patterns of polymer composites were investigated through derivatography (Q–1500D). It was demonstrated that the incorporation of lignin in modest quantities has a negligible impact on the thermal stability of the composites. Notably, the temperature at which the composites undergo thermal decomposition during thermal oxidation degradation exhibits a variation of over 10 °C, suggesting that the utilisation of lignin holds promise for the development of environmentally benign and cost-effective materials for diverse industrial applications.
У огляді розглядається теорія екситонних квазимолекул (утворених із просторово розділених електронів і дірок) у наносистемі, що складається з напівпровідникових та діелектричних колоїдних квантових точок (КТ), синтезованих у діелектричній та напівпровідниковій матрицях. Показано, що утворення екситонної квазимолекули має пороговий характер і можливе в наносистемі, в якої відстані D між поверхнями КТ визначаються умовою (де та деякі критичні відстані). Показано, що в такій наногетероструктурі «екситонні квазімолекули» являють собою дві КТ, на поверхні яких локалізуються екситони. Положення смуги енергії такого стану екситонної квазімолекули залежить як від середнього радіусу КТ, так і від відстані між їх поверхнями. Така залежність дозволяє цілеспрямовано керувати величиною енергії екситонної квазімолекули, змінюючи ці параметри наноструктури. Встановлено, що енергії зв’язку основного синглетного стану екситонних квазімолекул приймають суттєві значення, значно більші (майже на два порядки) за енергію зв’язку біекситону в напівпровідникових і діелектричних монокристалах. Показано, що основний внесок в енергію зв'язку основного синглетного стану екситонної квазімолекули вносить енергія обмінної взаємодії електронів з дірками, і цей внесок є значно більшим, ніж внесок енергії кулоновської взаємодії між електронами і дірками. Встановлено, що з підвищенням температури вище порога (Т ), може відбуватися перехід зі стану екситонної квазімолекули в екситонний стан. Показано, що при постійній концентрації екситонів (тобто постійній концентрації КТ) і температурах Т нижче можна очікувати нову смугу люмінесценції, зміщену від екситонної смуги на величину енергії зв’язку екситонної квазимолекули. Ця нова смуга зникає при більш високих температурах (Т ≥ ). При постійній температурі нижче збільшення концентрації екситонів призводить до ослаблення смуги екситонної люмінесценції та посилення смуги екситонної квазімолекули. Такі екситонні квазімолекули становлять фундаментальний інтерес як нові квазіатомні наноструктури; вони також можуть мати практичну цінність як нові наноматеріали для нанооптоелектроніки. Оскільки енергія основного синглетного стану квазімолекули знаходиться в інфрачервоному діапазоні спектра, то це дозволяє використовувати такі квазімолекули для створення нових інфрачервоних датчиків у біомедичних дослідженнях.
In mini-review, deals with the theory of exciton quasimolecules in a nanosystem consisting of double quantum dots of germanium synthesized in a silicon matrix. An exciton quasimolecule was formed as a result of the interaction of two spatially indirect excitons. It is shown that, depending on the distance D between the surfaces of the quantum dots, spatially indirect excitons and of exciton quasimolecules was formedin the nanosystem.The binding energy of the singlet ground state of the exciton quasimolecule has been gigantic exceeding the binding energy of the biexciton in a silicon single crystal by almost two orders of magnitude. The emergence of a band of localized electron states in the band gap of the silicon matrix was found. This band of localized electron states appeared as a result of the splitting of electron levels in the chain of germanium quantum dots. The nature of formation in the Ge/Si heterostructures was analyzed depending on the distance D between the surfaces of QDs SIEs and of exciton quasimolecules.It was shown that the binding energy of the ground singlet state of an exciton quasimolecule was gigantic, exceeding the binding energy of a biexciton in a silicon single crystal by almost two orders of magnitude.The possibility of using quasimolecules of excitons to create elements of silicon infrared nanooptoelectronics, including new infrared sensors, was established. The emergence of a band of localized electron states in the band gap of the silicon matrix was found.In this case, the band of localized electron states appeared as a result of the splitting of electron levels in the chain of germanium QDs.It was shown that the movement of an electron along the zone of localized electron states in the linear chain of germanium QDs caused an increase in photoconductivity.The effect of increasing photoconductivity can make a significant contribution in the process of converting the energy of the optical range in photosynthesizing nanosystems.
19 May 2023 in Molecular Crystals and Liquid Crystals
Large organic molecules and biomolecules can adopt multiple conformations, with the occurrences determined by their relative energies. Identifying the energetically most favorable conformations is crucial, especially when interpreting spectroscopic experiments conducted under cryogenic conditions. When the effects of irregular surrounding medium, such as noble gas matrices, on the vibrational properties of molecules become important, semi-empirical (SE) quantum-chemical methods are often employed for computational simulations. Although SE methods are computationally more efficient than first-principle quantum-chemical methods, they can be inaccurate in determining the energies of conformers in some molecules while displaying good accuracy in others. In this study, we employ a combination of advanced machine learning techniques, such as graph neural networks, to identify molecules with the highest errors in the relative energies of conformers computed by the semi-empirical tight-binding method GFN1-xTB. The performance of three different machine learning models is assessed by comparing their predicted errors with the actual errors in conformer energies obtained via the GFN1-xTB method. We further applied the ensemble machine-learning model to a larger collection of molecules from the ChEMBL database and identified a set of molecules as being challenging for the GFN1-xTB method. These molecules hold potential for further improvement of the GFN1-xTB method, showcasing the capability of machine learning models in identifying molecules that can challenge its physical model.
1 January 2024 in Medical physics – the current status, problems, the way of development. Innovation technologies
Intriduction. Assessing children's bone age is essential for detecting growth and developmental disorders. By comparing bone age to chronological age, physicians can identify deviations and diagnose issues. Methods. In this study, we used a neural network model to predict the bone age of children based on X-ray images of their hands. Results. The effectiveness of such application of the model is demonstrated in comparison with the average error results on the validation dataset. Conclusions. Our study has demonstrated that the DenseNet169 architecture, when integrated with patient gender information, can effectively predict bone age from X-ray images, yielding competitive results compared to established models like Milvue. We hope this approach will significantly improve prediction accuracy and provide deeper insights into bone development. By focusing on critical anatomical regions and integrating relevant clinical data, we aim to set new standards in automated bone age assessment, ultimately benefiting pediatric healthcare.