Vibration dampers and insulators are important components of transmission lines, and it is therefore important for the normal operation of transmission lines to detect defects in these components in a timely manner. In this paper, we provide an automatic detection method for component defects through patrolling inspection by an unmanned aerial vehicle (UAV). We constructed a dataset of vibration dampers and insulators (DVDI) on transmission lines in images obtained by the UAV. It is difficult to detect defects in vibration dampers and insulators from UAV images, as these components and their defective parts are very small parts of the images, and the components vary greatly in terms of their shape and color and are easily confused with the background. In view of this, we use the end-to-end coordinate attention and bidirectional feature pyramid network “you only look once” (BC-YOLO) to detect component defects. To make the network focus on the features of vibration dampers and insulators rather than the complex backgrounds, we added the coordinate attention (CA) module to YOLOv5. CA encodes each channel separately along the vertical and horizontal directions, which allows the attention module to simultaneously capture remote spatial interactions with precise location information and helps the network locate targets of interest more accurately. In the multiscale feature fusion stage, different input features have different resolutions, and their contributions to the fused output features are usually unequal. However, PANet treats each input feature equally and simply sums them up without distinction. In this paper, we replace the original PANet feature fusion framework in YOLOv5 with a bidirectional feature pyramid network (BiFPN). BiFPN introduces learnable weights to learn the importance of different features, which can make the network focus more on the feature mapping that contributes more to the output features. To verify the effectiveness of our method, we conducted a test in DVDI, and its mAP@0.5 reached 89.1%, a value 2.7% higher than for YOLOv5.

The accurate detection and timely replacement of abnormal vibration dampers on transmission lines are critical for the safe and stable operation of power systems. Recently, unmanned aerial vehicles (UAVs) have become widely used to inspect transmission lines. In this paper, we constructed a data set of abnormal vibration dampers (DAVDs) on transmission lines in images obtained by UAVs. There are four types of vibration dampers in this data set, and each vibration damper may be rusty, defective, or normal. The challenges in the detection of abnormal vibration dampers on transmission lines in the images captured by UAVs were as following: the images had a high resolution as well as the objects of vibration dampers were relatively small and sparsely distributed, and the backgrounds of cross stage partial networks of the images were complex due to the fact that the transmission lines were erected in a variety of outdoor environments. Existing methods of ground-based object detection significantly reduced the accuracy when dealing with complex backgrounds and small objects of abnormal vibration dampers detection. To address these issues, we proposed an end-to-end parallel mixed attention You Only Look Once (PMA-YOLO) network to improve the detection performance for abnormal vibration dampers. The parallel mixed attention (PMA) module was introduced and integrated into the YOLOv4 network. This module combines a channel attention block and a spatial attention block, and the convolution results of the input feature maps in parallel, allowing the network to pay more attention to critical regions of abnormal vibration dampers in complex background images. Meanwhile, in view of the problem that abnormal vibration dampers are prone to missing detections, we analyzed the scale and ratio of the ground truth boxes and used the K-means algorithm to re-cluster new anchors for abnormal vibration dampers in images. In addition, we introduced a multi-stage transfer learning strategy to improve the efficiency of the original training method and prevent overfitting by the network. The experimental results showed that the $mAP@0.5$ for PMA-YOLO in the detection of abnormal vibration dampers reached 93.8% on the test set of DAVD, 3.5% higher than that of YOLOv4. When the multi-stage transfer learning strategy was used, the $mAP@0.5$ was improved by a further 0.2%.

Aiming at the subjective experience of the physician, the high measurement error in the Cobb angle measurement of scoliosis X-ray images and the X-ray image of spine is difficult to segment. A deep learning based scoliosis Cobb angle measurement algorithm which can automatically calculate Cobb angle without the physician's manual definition is proposed. A DU-Net detection and segmentation network is proposed in this paper to remove the unrelated regions and to segment the spine contour in the spine X-ray image. The aggregated channel features in pedestrian detection algorithm is introduced to scoliosis image to realize the spine region detection. And the DU-Net network is training to segment spine contour. Therefore, the spine curve can be fitted by the spine contour and the Cobb angle can be automatically measured by the tangent line of spine curve. As a result, the Cobb angle measure methods yields an average error of 2.9° to reference Cobb angle which are measured manually by special orthopaedist. The detection algorithm in this paper yields an average precision of 98.5% and a recall of 99.5%. Moreover, the DU-Net reach an average Dice coefficient to reference segmentation of 90.28%, an IOU of 82.29% and a precision of 86.30%.

Hotspot residues are important in the determination of protein-protein interactions, and they always perform specific functions in biological processes. The determination of hotspot residues is by the commonly-used method of alanine scanning mutagenesis experiments, which is always costly and time consuming. To address this issue, computational methods have been developed. Most of them are structure based, i.e., using the information of solved protein structures. However, the number of solved protein structures is extremely less than that of sequences. Moreover, almost all of the predictors identified hotspots from the interfaces of protein complexes, seldom from the whole protein sequences. Therefore, determining hotspots from whole protein sequences by sequence information alone is urgent. To address the issue of hotspot predictions from the whole sequences of proteins, we proposed an ensemble system with random projections using statistical physicochemical properties of amino acids. First, an encoding scheme involving sequence profiles of residues and physicochemical properties from the AAindex1 dataset is developed. Then, the random projection technique was adopted to project the encoding instances into a reduced space. Then, several better random projections were obtained by training an IBk classifier based on the training dataset, which were thus applied to the test dataset. The ensemble of random projection classifiers is therefore obtained. Experimental results showed that although the performance of our method is not good enough for real applications of hotspots, it is very promising in the determination of hotspot residues from whole sequences.

Ski jumping is a high-speed sport, which makes it difficult to accurately analyze the technical motion in a subjective way. To solve this problem, we propose an image-based pose estimation method for analyzing the motion of ski jumpers. First, an image keypoint dataset of ski jumpers (KDSJ) was constructed. Next, in order to improve the precision of ski jumper pose estimation, an efficient channel attention (ECA) module was embedded in the residual structures of a high-resolution network (HRNet) to fuse more useful feature information. At the training stage, we used a transfer learning method which involved pre-training on the Common Objection in Context (COCO2017) to obtain feature knowledge from the COCO2017 for using in the task of ski jumper pose estimation. Finally, the detected keypoints of the ski jumpers were used to analyze the motion characteristics, using hip and knee angles over time (frames) as an example. Our experimental results showed that the proposed ECA-HRNet achieved the average precision of 73.4% on the COCO2017 test-dev set and the average precision of 86.4% on the KDSJ test set using the ground truth bounding boxes. These research results can provide guidance for auxiliary training and motion evaluation of ski jumpers.