The new actual scientific direction is in the development of different nanocomposites and the study of their medical–biological, physicochemical, and physicomechanical properties. One way to expand the functionality of nanocomposites and nanomaterials is to introduce carbon nanostructures into the polymer matrix. This study presents the properties of unsaturated polyester resins (Estromal, LERG S.A.) based on PET recyclate with multi-walled carbon nanotubes (MWCNTs): their mechanical and thermomechanical characteristics, resistance to ultraviolet radiation (UV-vis), and chemical resistance properties. The properties of the obtained materials were characterized using physical–chemical research methods. The changes in the properties of the composites for MWCNT content of 0.1, 0.3, and 0.5 wt % were determined. The results showed positive influences on the thermomechanical and mechanical properties of nanocomposites without significant deterioration of their gloss. Too much CNT added to the resin leads to heterogeneity of the composite structure.
The creation of heat-resistant polymers represents one of the most significant challenges and priorities in contemporary scientific research. The incorporation of a filler of analogous nature and content into disparate types of resins will facilitate the identification of the relationship between properties and the structure of macromolecular chains in synthetic resins that function as composite matrices. The objective of this study was to ascertain the impact of lignin at 5 and 15% by weight on the thermal degradation of two resin-based composites with disparate structural compositions. The thermal decomposition products of the composites were determined by the method of temperature-programmed desorption mass spectroscopy (TPD MS). The thermal oxidative degradation patterns of polymer composites were investigated through derivatography (Q–1500D). It was demonstrated that the incorporation of lignin in modest quantities has a negligible impact on the thermal stability of the composites. Notably, the temperature at which the composites undergo thermal decomposition during thermal oxidation degradation exhibits a variation of over 10 °C, suggesting that the utilisation of lignin holds promise for the development of environmentally benign and cost-effective materials for diverse industrial applications.
4 June 2023 in Physics and Chemistry of Solid State
Using the methods of quantum chemistry, the energy effects of the interaction of partially oxidized graphene-like planes with each other and the effect on this characteristic of the nature of the functional groups present in the oxidized graphene-like planes, as well as the dimensions of the graphene-like planes themselves, were clarified. It was established that the reaction between the hydroxyl and aldehyde groups of two interacting graphene-like planes is the most thermodynamically probable, regardless of the dimensions of the graphene-like planes. The reaction between two carboxyl groups of different graphene-like planes is the least thermodynamically probable. To create nanocomposites by interacting graphene-like planes with each other, it is necessary that the graphene-like planes contain hydroxyl and aldehyde groups.
Методами квантової хімії досліджувалась взаємодія графену з фрагментами поліхлортрифторетилену. В межах теорії функціоналу густини з обмінно-кореляційним функціоналом В3LYP, базисним набором 6-31G(d,p) і дисперсійною поправкою Грімме та методом теорії збурень Меллера-Плесета другого порядку (МР2) розраховані величини енергії взаємодії графену з олігомерами поліхлортрифторетилену і оптимізовані найбільш ймовірні структури їхніх міжмолекулярних комплексів. За модель графену було обрано графеноподібні площини різного розміру, а саме: С40Н16, С54Н18 та С96Н24. Олігомери поліхлортрифторетилену і графеноподібних площин у сформованих нанокомпозитах розташовані ближче один до одного, ніж окремі полімерні ланки між собою. Порівнюючи результати розрахунку методами B3LYP-D3/6-31G(d,p) і МР2/6-31G(d,p) як у випадку взаємодій олігомерів поліхлортрифторетилену між собою, так і міжмолекулярних комплексів олігомерів поліхлортрифторетилену і графеноподібних площин, з’ясовано, що для методу Меллера-Плесета другого порядку характерна більша міжмолекулярна відстань і менша енергія міжмолекулярних взаємодій в порівнянні з методом теорії функціонала густини з дисперсійною поправкою Грімме, що пояснюється тим, що в методі МР2 не повністю враховані відносно малі складові дисперсійних взаємодій. Аналіз результатів розрахунку методами квантової хімії свідчить про те, що додавання графеноподібних площин до полімера поліхлортрифторетилену веде до збільшення енергії міжмолекулярної взаємодії незалежно від використаного методу розрахунку і розмірів олігомерів поліхлортрифторетилену та графеноподібних площин. Це може свідчити про більшу міцність і термічну стабільність нанокомпозиту на основі графеноподібних площин з олігомерами поліхлортрифторетилену.Нульове значення вільної енергії Гіббса (ΔGreact) для взаємодії двох димерів один з одним характерне при 270 К, а аналогічне значення взаємодії димера ПХТФЕ з GLP – при значно вищій температурі (420 К). Цей факт відображає зростання термостабільності нанокомпозитів порівняно з самим полімером.
25 August 2026 in Himia, Fizika ta Tehnologia Poverhni
Nanostructured carbon materials, such as graphene, oxidized graphene, and graphene oxide doped with nitrogen and sulfur heteroatoms, have specific physicochemical properties and can be used in various fields from electronics to medicine. Formed carbon nanoparticles are difficult to dope (especially oxidized graphene or graphene oxide) in such a way that they retain their structure as a whole. Therefore, it is promising to obtain precursors of these nanoparticles that are already doped with the desired heteroatom. Rolled or pressed materials from expanded graphite (EG) can be a precursor for obtaining such nanoscale materials by anodic exfoliation in electrolytes. Therefore, the development of methods for the synthesis of EG containing nitrogen and sulfur heteroatoms is the goal of this work. The paper deals with the synthesis and study of the physicochemical properties of graphite intercalation compounds (GICs) formed by their interaction with concentrated nitric and sulfuric acids, as well as their mixtures in various ratios. The main characteristics of the resulting GICs were determined and their capability to expand thermally was examined. It was shown that GICs with sulfuric acid have a better ability to expand and allow obtaining better quality EGs. EG samples obtained from these GICs were characterized by X-ray photoelectron spectroscopy (XPS) and derivatography. It was determined that during thermal expansion of co-intercalated graphite compounds, nitrogen and sulfur atoms are incorporated into the graphene planes of EG particles. It was shown that this method can be used to obtain EG doped with sulfur heteroatoms (0.2–0.5 at. %) mainly in sulfite and sulfate groups and nitrogen (0.6–1.2 at. %) mainly in the pyrrolic and quaternary chemical states, the content of which can be regulated by changing the ratio of sulfuric and nitric acids in the intercalating mixtures.