Samir Paulo Paulo Jasper

Dr. Samir Paulo Paulo Jasper

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2017 in Scientia Agraria
Verified
Journal Article
Open access
PDF file
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
LBLuciano de Souza Ribeiro Bueno
Luciano de Souza Ribeiro Bueno
MLMaíra Laskoski
Maíra Laskoski
CLCamilla Weber Langhinotti
Camilla Weber Langhinotti
GPGuilherme Luiz Parize
Guilherme Luiz Parize
O sistema de gerenciamento automático de marchas permite ao trator, na rotação de trabalho estabelecida no motor, extrair o máximo de desempenho de tração do trator. Neste trabalho, os benefícios de gerenciamento automático de marchas foram comprovados através da comparação da velocidade, patinagem, consumo horário de combustível, rendimento e potência na barra de tração, força e consumo específico durante deslocamento do trator nas condições manual e automática de gerenciamento de marcha. O experimento foi conduzido em delineamento em faixas, com dois tratamentos (marchas selecionadas manualmente e automaticamente) e cinco repetições. Os parâmetros foram determinados pelo método de comboio composto por dois tratores conduzidos em pavimento de concreto à velocidade de 8,0 km h-1 e o segundo trator simulando carga de 40 kN na barra de tração. O gerenciamento automático e manual das marchas não resultou em diferença significativa na força e patinagem. Contudo, o gerenciamento automático de marchas permitiu que o trator atingisse maior velocidade com menor consumo específico e horário de combustível, com respectivo aumento na potência e rendimento na barra de tração. Palavras–chave: Tratores agrícolas; caixa de câmbio; eficiência tratativa.

1 January 2021 in Ciência E Agrotecnologia
Verified
Journal Article
Open access
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
DSDaniel Savi
Daniel Savi
LNLauro Strapasson Neto
Lauro Strapasson Neto
LKLeonardo Leônidas Kmiecik
Leonardo Leônidas Kmiecik
LSLuiz Ricardo Sobenko
Luiz Ricardo Sobenko
The decision-making capability of the machine to harvest grains must consider a lower fuel consumption with a higher operating velocity allied to a greater performance of the grain cleaning system, along with lower rates of the damage and waste produced. This study aimed at evaluating the operational performance and the energy efficiency of two axial harvesters, having different trail and separation systems in the soybean seed harvest. The experiment was carried out in a completely randomized block design in 500-m bands, consisting of two factors, namely two axial harvesters (single and double rotor) and six target velocities (3, 4, 5, 6, 7, and 8 km h-1). Regarding the operational energy performance, the hourly fuel consumption, operational speed, operational field capacity, fuel consumption per area and mass of the harvested grain, and the handling capacity of the harvest were evaluated. The harvesting performance parameters, such as the percentage losses in the platform and the trail system, broken grains, impurities, and the pods, which did not undergo threshing, were evaluated. The results obtained showed that the single-rotor harvester had a better energy efficiency, while the double-rotor harvester had a better operational performance. The double-rotor harvester was agronomically more efficient.

12 December 2022 in Smart Agricultural Technology
Verified
Journal Article
Open access
FMFernanda Gonçalves Moreno
Fernanda Gonçalves Moreno
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
RFRafael da Silva Ferraz
Rafael da Silva Ferraz
DSDaniel Savi
Daniel Savi

22 November 2022 in Acta Scientiarum. Agronomy
Verified
Journal Article
Open access
PDF file
DSDaniel Savi
Daniel Savi
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
LKLeonardo Leonidas Kmiecik
Leonardo Leonidas Kmiecik
LNLauro Strapasson Neto
Lauro Strapasson Neto
GCGabriele Santiago de Campos
Gabriele Santiago de Campos
The use of powdered graphite as a solid lubricant to reduce friction among soybean seeds during mechanical sowing aims to facilitate the seed flow into the seed reservoir, while reducing mechanical damage to the seed. The objective of this study was to evaluate the influence of graphite on the longitudinal deposition of soybean seeds using mechanical and pneumatic feeders at different distribution velocities. The experiment was performed on a static simulation-test bench, with a completely randomized design with two varying factors: graphite dose (0, 1, 2, 4, and 8 g kg-1 seed) and distribution velocity (5, 7, 9, and 11 km h-1 for the pneumatic feeder; and 3, 5, 7, and 9 km h-1 for the mechanical feeder). To assess the homogeneity of seed distribution, the frequency of parameters such as double, flawed, and acceptable spacings, coefficient of variation, and precision index were evaluated from five repetitions of 250 spacing each. For the pneumatic feeder, the optimal values to maximize precision of seed deposition were 4.6 g kg-1 and 6.7 km h-1 of graphite dose and distribution velocity, respectively. In turn, the optimal values to minimize undesirable spacing while maximizing accuracy with the mechanical feeder were 4.9±0.6 g kg-1 and 4.9±0.3 km h-1. Overall, regardless of feeding mechanism, the use of graphite promoted greater efficiency in the distribution of seeds owing to the higher level of fluidity inside the reservoir; however, high doses can cause the opposite effect. In addition, an excessive increase in speed influenced seed distribution negatively.

1 December 2019 in Engenharia Agrícola
Verified
Journal Article
Open access
PDF file
YOYasser A. Oiole
Yasser A. Oiole
LKLeonardo L. Kmiecik
Leonardo L. Kmiecik
GPGuilherme L. Parize
Guilherme L. Parize
TSThiago X. da Silva
Thiago X. da Silva
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
The operational performance of the agricultural tractor can be increased by adjusting parameters such as tire inflation pressure, axle mass distribution and gauge opening, which is a very divergent factor in controlled-traffic production. The objective of the experiment was to measure the energy performance of a 93 kW agricultural tractor in intermediate grading operation in two slopes (flat and sloping) and three gauge configurations (closed, intermediate and open) in mobilized soil. Energy performance was determined from the following parameters: slip, engine speed, actual effective speed, hourly and specific fuel consumption; strength, power and performance on the drawbar. Turbo pressure and temperature monitoring was also performed at six different engine points. The experiment was conducted in double factorial arrangement (2 slopes and 3 gauges), with four replications, totaling 24 plots. Data were analyzed for normality and homoscedasticity of the residues, after ANOVA and when significant, the means test. Tilts and tire gauges did not differ statistically, so it can be concluded that depending on the operation do not interfere with operating performance.

1 January 2025 in Ciência Rural
Verified
Journal Article
Open access
PDF file
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
WMWilliam Santiago de Mendonça
William Santiago de Mendonça
EJEduardo Affonso Jung
Eduardo Affonso Jung
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
EGEduardo Alves Gracietti
Eduardo Alves Gracietti
The breakthrough of articulated tractors has led to a significant increase in productivity and a cost reduction of agricultural operations. The performance of the tractor implement system depends on the understanding of the tractors’ energy parameters. Fertilizer seeders operate between 6 and 9 km h-1, while seed drills allow higher speeds. Increasing sowing speed improves operational efficiency. However, it is important to adequately set the machinery, to optimize the energy parameters, considering the balance between productivity and sustainability. This study evaluated the energy and operating parameters of a 398kW articulated agricultural tractor in a sowing operation at different speeds. The experiment was conducted in a complete randomized block design. Five theoretical speeds were chosen for the sowing operation (6, 7, 8, 9 and 10 km h-1), with seven replications (35 units). The tractor operating parameters were measured: operational speed, slippage, engine speed, hourly fuel consumption, engine thermal efficiency, specific fuel consumption, drawbar force, drawbar efficiency, fuel consumption per area and field operating capacity. The data were subjected to normality test, when significant, variance analysis. Results showed high field capacity in the highest speed and low fuel consumption per area at the highest speed.