Gabriel Ganancini Zimmermann

Dr. Gabriel Ganancini Zimmermann

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Ciência E Agrotecnologia
Verified
Journal Article
Open access
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
DSDaniel Savi
Daniel Savi
LNLauro Strapasson Neto
Lauro Strapasson Neto
LKLeonardo Leônidas Kmiecik
Leonardo Leônidas Kmiecik
LSLuiz Ricardo Sobenko
Luiz Ricardo Sobenko
The decision-making capability of the machine to harvest grains must consider a lower fuel consumption with a higher operating velocity allied to a greater performance of the grain cleaning system, along with lower rates of the damage and waste produced. This study aimed at evaluating the operational performance and the energy efficiency of two axial harvesters, having different trail and separation systems in the soybean seed harvest. The experiment was carried out in a completely randomized block design in 500-m bands, consisting of two factors, namely two axial harvesters (single and double rotor) and six target velocities (3, 4, 5, 6, 7, and 8 km h-1). Regarding the operational energy performance, the hourly fuel consumption, operational speed, operational field capacity, fuel consumption per area and mass of the harvested grain, and the handling capacity of the harvest were evaluated. The harvesting performance parameters, such as the percentage losses in the platform and the trail system, broken grains, impurities, and the pods, which did not undergo threshing, were evaluated. The results obtained showed that the single-rotor harvester had a better energy efficiency, while the double-rotor harvester had a better operational performance. The double-rotor harvester was agronomically more efficient.

1 February 2022 in Engenharia Agrícola
Verified
Journal Article
Open access
LNLauro Strapasson Neto
Lauro Strapasson Neto
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
SJSamir P. Jasper
Samir P. Jasper
DSDaniel Savi
Daniel Savi
LSLuiz R. Sobenko
Luiz R. Sobenko

12 December 2022 in Smart Agricultural Technology
Verified
Journal Article
Open access
FMFernanda Gonçalves Moreno
Fernanda Gonçalves Moreno
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
RFRafael da Silva Ferraz
Rafael da Silva Ferraz
DSDaniel Savi
Daniel Savi

22 November 2022 in Acta Scientiarum. Agronomy
Verified
Journal Article
Open access
PDF file
DSDaniel Savi
Daniel Savi
SJSamir Paulo Paulo Jasper
Samir Paulo Paulo Jasper
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
LKLeonardo Leonidas Kmiecik
Leonardo Leonidas Kmiecik
LNLauro Strapasson Neto
Lauro Strapasson Neto
GCGabriele Santiago de Campos
Gabriele Santiago de Campos
The use of powdered graphite as a solid lubricant to reduce friction among soybean seeds during mechanical sowing aims to facilitate the seed flow into the seed reservoir, while reducing mechanical damage to the seed. The objective of this study was to evaluate the influence of graphite on the longitudinal deposition of soybean seeds using mechanical and pneumatic feeders at different distribution velocities. The experiment was performed on a static simulation-test bench, with a completely randomized design with two varying factors: graphite dose (0, 1, 2, 4, and 8 g kg-1 seed) and distribution velocity (5, 7, 9, and 11 km h-1 for the pneumatic feeder; and 3, 5, 7, and 9 km h-1 for the mechanical feeder). To assess the homogeneity of seed distribution, the frequency of parameters such as double, flawed, and acceptable spacings, coefficient of variation, and precision index were evaluated from five repetitions of 250 spacing each. For the pneumatic feeder, the optimal values to maximize precision of seed deposition were 4.6 g kg-1 and 6.7 km h-1 of graphite dose and distribution velocity, respectively. In turn, the optimal values to minimize undesirable spacing while maximizing accuracy with the mechanical feeder were 4.9±0.6 g kg-1 and 4.9±0.3 km h-1. Overall, regardless of feeding mechanism, the use of graphite promoted greater efficiency in the distribution of seeds owing to the higher level of fluidity inside the reservoir; however, high doses can cause the opposite effect. In addition, an excessive increase in speed influenced seed distribution negatively.

1 December 2023 in Engenharia Agrícola
Verified
Journal Article
Open access
PDF file
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
SJSamir P. Jasper
Samir P. Jasper
DSDaniel Savi
Daniel Savi
TFTiago R. Francetto
Tiago R. Francetto
JCJorge W. Cortez
Jorge W. Cortez
Operational speed influences the soil preparation quality, the first established according to the working set performance and its traction capacity. The experiment's objective is to determine the influence of working speed on energy and operational performance of an agricultural tractor with Full-Powershift transmission when performing a harrowing operation. We conducted the experiment using lines, in a randomized block design. It had four operational soil preparation speeds, with seven repetitions, totaling 28 experimental units. We measured the following parameters per worked area: slipping, engine rotation, specific and per hour fuel consumption, strength, power, and yield on the drawbar and operating speed. Additionally, we analyzed soil profilometry parameters concerning the mobilized area and working thickness. We also evaluated the variance of the collected data and, when significant, submitted it to a regression test. The data showed that higher operating speeds result in greater operational performance and reduction of the energy demand of the mechanized set under study. In addition, this increase doesn't have a beneficial effect on grid fluctuation, not affecting the quality of soil preparation.

14 December 2020 in PLOS ONE
Verified
Journal Article
Open access
PDF file
GZGabriel Ganancini Zimmermann
Gabriel Ganancini Zimmermann
SJSamir Paulo Jasper
Samir Paulo Jasper
LKLeonardo Leônidas Kmiecik
Leonardo Leônidas Kmiecik
LNLauro Strapasson Neto
Lauro Strapasson Neto
TSThiago Xavier da Silva
Thiago Xavier da Silva
YOYasser Alabi Oiole
Yasser Alabi Oiole
The success of the application of granular fertilizers (GFs) in planting rows depends on the uniformity and performance of product dispensing systems, which are influenced by external factors. The objective of this study was to determine the outflow rates of two GF formulations (GF1 04-14-08 and GF2 04-30-10) using three types of fertilizer spreader—with one spiral roller (A), two spiral rollers (B), or a fluted roller (C)—and three operating speeds (1,11, 1.94, and 2.77 m s-1). The following parameters were determined in GFs: density, angle of repose, water content, and segregation (particle size). In the designed test bench, GFs were transferred from a reservoir to a spreader, and ultimately to a container, where they were weighed, and data were transmitted to the data acquisition system (DAS). A total of 7,560 outflow data points were collected (g s-1) and subjected to descriptive analysis of measures of central tendency, dispersion, asymmetry, and kurtosis, and Shewhart control charts were generated. Particle density and segregation were significantly different between the GFs, whereas the angle of repose and water content were not significantly different. The bench design and the DAS allowed measuring the outflow of GFs in different spreaders and demonstrated that this parameter was influenced by particle segregation. The segregation of GF1 was higher than that of GF2. The outflow variability at the speed of 1.11 m s-1 was lower, and the spreader with a fluted roller had the highest uniformity and was the most suitable for application with variable rates.