The high dependence of agriculture on fertilizers demands an improvement in the processes involved, with the purpose of environmental and economic sustainability. The objective was to compare the performance of helical dosing mechanisms with two formulations of granulated NPK fertilizers at three operating speeds. During the experiment, we used an electronic and automated bench to evaluate the performance of the single helical and double helical dosing mechanisms, in a completely randomized design. This bench measured the overflow of the two formulations of granulated NPK fertilizers (04-14-08 and 04-30-10) under different angular velocities (1.11; 1.94; and 2.77 m s-1). On the tests, we collected flow data and submitted them to descriptive statistics, frequency histograms, and statistical process control. The single helical feeder, as the speed increased, exhibited greater homogeneity of granulated NPK fertilizer deposition, with 611 flaws ha-1 compared to 3763 flaws ha-1 in the double screw. Although, the speeds of 7.0 and 10.0 km h-1 generated an increase in the flow of both granular fertilizers, as expected, the 04-30-10 fertilizer obtained the most uniform distribution at the lowest speed.
1 August 2023 in Revista Brasileira de Engenharia Agrícola E Ambiental
The quality of soil tillage can be measured with a specific device called profilometer, which provides information on roughness, mobilized area, blistering, and thickness in disturbed soils. However, it is an outdated device, requiring many hours of field and office work. Thus, the objective of the present work was to develop an electronic profilometer using laser triangulation and ultrasound sensors for measurement of digitally mobilized soil profile. The results obtained were compared to those acquired with a conventional sliding bar profilometer to evaluate the accuracy and efficiency of the sensors. The experiment was conducted in a completely randomized design under a controlled environment. The variables were measured seven times using the three profilometers (laser, ultrasound, and conventional) in the original, elevated, and mobilized soil profiles. The electronic profilometer with ultrasound differed in all the measurements when compared to the conventional profilometer, which differed from the laser sensor only in modified roughness.
The proper distribution of maize seeds in pneumatic dispensers is essential for high-quality sowing operations. To enhance seed distribution accuracy, advanced pneumatic mechanisms utilizing new electrically driven dosing devices have been developed, as mechanical mechanisms often lead to distribution errors. Consequently, it becomes imperative to assess the impact of these mechanisms, particularly concerning operational speed. This study aims to evaluate the transmission performance of pneumatic dispensers when depositing maize seeds at varying operating speeds. The experiment was conducted on a static simulation bench, employing a completely randomized design and assessing two seed distribution mechanisms at speeds of 5.0, 7.0, 9.0, 11.0, and 13.0 km h-1. Parameters analyzed included acceptable spacing, double failure, coefficient of variation, and precision index, gathered from five repetitions of 250 consecutive seed depositions. The results suggest that the independent electrically driven dosing mechanism outperforms the pneumatic dosing mechanism with mechanical transmission in terms of acceptable spacing (1.27), missing spacing (0.85), and accuracy index (1.31). However, it is crucial to note that an increase in operating speed negatively impacts seed quality for both dispenser drive mechanisms.