The growing need for sustainable materials has driven interest in natural fiber-reinforced composites. The vibrational behavior of natural composites incorporating unconventional, waste-derived fibers remains underexplored. This study addresses gap by investigating the dynamic characteristics of natural composite plates reinforced with banana fibers, sisal fibers, jute, chicken feathers, and palmyra sprouts. The objective is to evaluate how varying fiber compositions and aspect ratios influence the vibrational response of the composites. The composites were fabricated using the compression molding method, with polyester resin serving as the matrix. Impact hammer testing was employed to determine the fundamental natural frequency, damping factor, and amplitude across different fiber weight ratios and aspect ratios. Results showed that the composite containing 15 wt% palmyra sprouts, 10 wt% sisal fibers, 5 wt% chicken feathers, and 70 wt% polyester resin exhibited a fundamental natural frequency of 279.69 Hz for an aspect ratio (a/b) of 0.25 and 609.38 Hz for a ratio of 0.125. The findings indicate that optimized fiber blending enhances the vibrational characteristics, making the material suitable for vibration control applications. This study contributes to the development of eco-friendly composites with tailored dynamic properties. Future work may explore long-term durability and performance in structural and energy absorption systems.
1 May 2021 in Journal of Physics: Conference Series
In this paper, an attempt is made to optimize the turning process by minimizing Surface Roughness and Tool Wear. The independent l factors used are Environmental Condition, Feed Rate, Depth of Cut, Nose Radius and Tool Types. The dependant factors are Surface Roughness and Tool Wear. Experimentations are conducted on CNC Spinner Lathe machine. AISI 4340 steel is selected as workpiece material. Three different types of Cutting tool are considered for the study. Grey Relational Analysis and Taguchi Philosophy together are used to optimize the process. As per the Taguchi method L27, Orthogonal Array (OA) is finalized for the experimentation. For the computation of the response table and ANOVA table, the Taguchi based data Analysis is used. The Variance Analysis (ANOVA) and S/N ratio (SRN) are employed to find the contribution and ranking of contribution parameters to optimize multiple output parameters.
The hardness of the work material is one of the most important process variables that affects how well machining and milling operations perform. Experiments wer The hardness of the work material is one of the most important process variables that affects how well machining and milling operations perform. Experiments wer
1 May 2021 in Journal of Physics: Conference Series
Flywheel is a mechanical device which acts as a saving bank account where one can deposit extra money and withdraws whenever required likewise flywheel also store the energy when the demand is less and deliver it when the demand is high. It is mounted in between driver and the follower. It act as a energy store. This paper is focused on the use of mathematical modeling of flywheel and space optimized design for punching press. Flywheel has to be designed for a punch which has to make 20 holes/minute in a plate of thickness 12 mm with constrained of space. 1200mm is the limiting value of diameter of flywheel. The flywheel design is based on the space limitations. The various parameters and stresses induced are determined. At the end it is seen that diameter of the flywheel is less than the permissible value therefore design is safe and optimized for available space.