chelliah Arumugam

Mr. chelliah Arumugam

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
Shaik SaboorShaik Saboor
Shaik Saboor
KGKIRANKUMAR GORANTLA
KIRANKUMAR GORANTLA
Aritra GhoshAritra Ghosh
Aritra Ghosh
CAchelliah Arumugam
chelliah Arumugam
VMVenkata Ramana Maduru
Venkata Ramana Maduru
Strategic selection of glazing, its window-to-wall ratio, and wall thickness of building reduce the energy consumption in the built environment. This paper presents the experimental results of solar optical properties of five glasses: clear, tinted bronze, tinted green, bronze reflective, and polymer dispersed liquid crystal glasses. Laterite room models were modeled with four different thicknesses and four different glasses using Design Builder, and thermal simulation tests were carried out using Energy Plus. The energy savings and carbon emission mitigation prospective of a building’s glazing variety, window-to-wall ratio (WWR), and wall thickness were investigated. The results revealed that among the five window glasses studied, the polymer dispersed liquid crystal glazing window (PDLCGW) was found to be the most energy-efficient for low heat gain in laterite rooms. The laterite room with 0.23 m wall thickness and 40% PDLCGW WWR reduced 18.9% heat gain in comparison with the laterite room with 0.23 m wall thickness and 40% clear glass WWR. The laterite room of 0.23 m wall thickness with PDLCGW glazing of 40% WWR enhanced cooling cost savings up to USD 31.9 compared to the laterite room of 0.08 m wall thickness with 40% PDLCGW. The laterite room of 0.23 m wall thickness with PDLCGW glazing of 40% WWR also showed improved carbon mitigation of 516 kg of CO2/year compared to the 0.23 m wall thickness laterite room of 40% WWR with clear glass glazing. The results also showed that the laterite room with 0.23 m wall thickness and 100% clear glass WWR increased heat gain by 28.2% in comparison with the laterite room with 0.23 m wall thickness and 20% clear glass WWR. The results of this article are essential for the strategic design of buildings for energy saving and emission reduction.

1 January 2024 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
ECErdem Cuce
Erdem Cuce
Shaik SaboorShaik Saboor
Shaik Saboor
ARAbin Roy
Abin Roy
CAchelliah Arumugam
chelliah Arumugam
Asif AfzalAsif Afzal
Asif Afzal
SSSharmas Vali Shaik
Sharmas Vali Shaik
In green energy buildings, air conditioning charges can be lowered through careful planning of the building’s envelope. This article investigates several strategically designed phase change material (PCM) roof envelopes for savings on air conditioning prices, CO2 emission abatement, and payback timeframes in hot–arid and warm‐temperate climates, taking into account unsteady heat transfer characteristics, cooling, and heating degree–hours. This is accomplished by using six different PCMs–RCC (reinforced cement concrete) roof envelope cases (RCC roof with PCM layer on the outer side, RCC roof with PCM layer on the center (middle), RCC roof with PCM layer on the inside, RCC roof with PCM layers placed on the outside and center, RCC roof with PCM layers placed on the center and inside, and RCC roof with PCM layers placed on the outer side and inside) with three PCMs (FS29 (form stable mixture), HS29 (hydrated salt), and OM29 (organic mixture)). PCM thermophysical characteristics are experimentally measured. The analytical results are experimentally validated. In hot–arid and warm‐temperate regions, the layer of PCM installed on the outside of the RCC with HS29 saved the most on air conditioning expenses, at 6.29 and 6.61 $/m2, respectively. They also reported the greatest carbon mitigation of 300.55 kg of CO2/year and 281.58 kg of CO2/year with the faster payback periods. PCM roof envelopes are the most energy‐efficient option for green buildings.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
CAchelliah Arumugam
chelliah Arumugam
Shaik SaboorShaik Saboor
Shaik Saboor
Aritra GhoshAritra Ghosh
Aritra Ghosh
Karolos J. KontoleonKarolos J. Kontoleon
Karolos J. Kontoleon
Buildings contribute greatly to global energy use and consumption. The energy consumption of buildings is significant due to the integration of heating, ventilation, and cooling systems. Evidently, the utilization of phase change materials (PCMs) in building design can adequately reduce air‐conditioning costs of buildings by diminishing external heat gains and losses. Moreover, the adoption of natural, eco‐friendly, and cost‐effective materials, such as terracotta bricks, can be valuable from an environmental point of view. This paper intends to assess the air‐conditioning cost‐saving potential of several PCM stuffed terracotta brick configurations. In that respect, the encapsulated PCMs were filled in the hollows of terracotta bricks. For the aims of this study, five different types of PCMs were considered, in relation to the thermophysical properties of their solid and liquid state (OM18: organic mixture, HS22: hydrated salt, OM29, OM32, and OM37). In addition, three PCM‐stuffed terracotta brick configurations were examined with reference to the number of the PCM layers (PCMTB‐A with one PCM layer, PCMTB‐B with two PCM layers, and PCMTB‐C with three PCM layers). Therefore, fifteen PCM‐stuffed terracotta brick configurations were analysed numerically, related to environmental conditions that refer to two different scenarios in India (hot dry and composite climates). Results have unveiled that the OM32 PCM assemblies have shown better thermoeconomic performance compared to the other types of PCM. With respect to the most advantageous number of PCM layers, the evidence of this analysis has exposed that the PCMTB‐C case has shown the highest annual air‐conditioning cost‐savings and the highest yearly carbon emission mitigations in both climates (Ahmedabad and Lucknow). In hot‐dry climates, the PCMTB‐C with OM32 PCM exhibited the highest annual air‐conditioning cost‐saving ($ 74.7), the highest annual carbon emission mitigation (1.43 ton/kWh), and the moderate payback period (22.5 years) compared to the other cases. To conclude, the findings of this study suggest a suitable way to improve the decision‐making process of building design, while bridging the performance gap in terms of energy efficiency and sustainability.

24 April 2026 in Interactions
Verified
Journal Article
Closed access
PDF file
PKPRASHANT D. KAMBLE
PRASHANT D. KAMBLE
Satishkumar PSatishkumar P
Satishkumar P
DSD. Selvapandian
D. Selvapandian
RSRajasekaran Saminathan
Rajasekaran Saminathan
PSPallavi Singh
Pallavi Singh
CAchelliah Arumugam
chelliah Arumugam