MEHMET FATİH YOLDAŞ

Dr. MEHMET FATİH YOLDAŞ

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
Since composite materials are light and corrosion-resistant, they have replaced many traditional materials in the aviation and marine industries. Composite materials have the advantages of a much higher strength–weight ratio, lower maintenance requirements, and the ability to form complex shapes, such as bodies, compared to carbon steel. In this study, the mechanical properties of glass fiber reinforced (GFRP) and carbon fiber reinforced (CFRP) composite materials were investigated in marine applications in which composite materials had been used. In this study, 0/90 oriented twill weave eight-ply GFRP and eight-ply CFRP composite materials were used, incorporating the hand lay-up method and hot-pressing method. Seawater was taken from the Aegean Sea, Izmir Province (Balçova/İnciraltı), and had an average temperature of 22.43 °C. This seawater was kept in different containers for 30 days and 60 days (a total of 1440 h of keeping in seawater) with the intent to test the GFRP and CFRP composite samples separately. The produced CFRP and GFRP sheets were then cut with a wet (circular) saw in accordance with the standard procedure in the Composite Research and Testing Laboratory of the Dokuz Eylul University Department of Mechanical Engineering. Moisture retention percentages and Charpy impact tests were carried out. Then, three-point bending tests were carried out according to TS EN ISO 14125. The damage in the material was examined using a ZEISS Stereo Discovery.V12 imaging microscope (Oberkochen, Germany). The mechanical properties of CFRP- and GFRP-reinforced composite samples before and after aging were investigated using the Charpy impact test and three-point bending test. Then, the effects of the seawater environment on the mechanical properties of the CFRP and GFRP composite materials were evaluated by comparing the results. The aim was to better understand what kind of damage would occur in GFRP and CFRP composite materials given the effects of seawater and at what stages changes would occur in the mechanical properties of these materials. Moisture retention rates (%) in the tested samples after the Charpy impact test were 2.56% in GFRP and 0.47% in CFRP after 30 days. In the tested samples after the three-point bending test, these values were 1.41% in GFRP and 0.31% in CFRP after 30 days. Subsequent to the Charpy impact tests, the fracture toughness values of the CFRP samples tested at the 30 J impact energy level before aging in seawater conditions for 30 days or 60 days were found to be increased by 15.79% and 21.08%, respectively. The fracture toughness values of the GFRP tested at the 30 J impact energy level in dry conditions and kept in seawater for 30 days or 60 days were found to be 27.69% and 29.23%, respectively. The energy absorbed during the impact tests by the GFRP samples was higher than in the CFRP samples. This showed that the GFRP samples were more brittle. Subsequent to the three-point bending tests, the CFRP composite samples kept in seawater for periods of 30 days and 60 days showed changes in the modulus of elasticity of 7.48% and 7.46%, respectively, compared to the dry samples. The GFRP composite samples kept in seawater for periods of 30 days and 60 days showed changes in the modulus of elasticity of 7.015% and 11.53%, respectively, compared to the dry samples. The change in the modulus of elasticity was less in the CFRP samples than in GFRP. All of these results showed that the mechanical properties of CFRP were better than those of GFRP.

5 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
The depletion of fossil fuels and the rise of environmental concerns have increased the importance of renewable energy sources, positioning wind energy as a key alternative. Modern wind turbine blades are predominantly manufactured from composite materials due to their light weight, high strength, and resistance to corrosion. In offshore applications, approximately 95% of the composite content is glass fiber-reinforced polymer (GFRP), while the remaining 5% is carbon fiber-reinforced polymer (CFRP). GFRP is favored for its low cost and fatigue resistance, whereas CFRP offers superior strength and stiffness but is limited by high production costs. This study investigates the durability of adhesively bonded GFRP and CFRP joints under marine exposure. Seven-layer GFRP and eight-layer CFRP laminates were produced using a 90° unidirectional twill weave and prepared in accordance with ASTM D5868-01. Specimens were immersed in natural Aegean Sea water (21 °C, salinity 3.3–3.7%) for 1, 2, and 3 months. Measurements revealed that GFRP absorbed significantly more moisture (1.02%, 2.97%, 3.78%) than CFRP (0.49%, 0.76%, 0.91%). Four-point bending tests conducted according to ASTM D790 showed reductions in Young’s modulus of up to 9.45% for GFRP and 3.48% for CFRP. Scanning electron microscopy (SEM) confirmed that moisture-induced degradation was more severe in GFRP joints compared to CFRP. These findings highlight the critical role of environmental exposure in the mechanical performance of marine composite joints.

Verified
Journal Article
Open access
PDF file
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
In this study, the effects of exposure to seawater on the material properties of glass fiber-reinforced polymer (GFRP) and carbon fiber-reinforced polymer (CFRP) samples were investigated. The samples were stored in seawater with a salinity of 3.3–3.7% and a temperature of 23.5 °C taken from the Aegean Sea in September for different periods (1, 2, 3, 6 and 15 months). The samples prepared in accordance with the ASTM D5868-01 standard were subjected to axial impact testing. In the first stage of this study, moisture retention percentages were determined, and, then, axial impact tests were performed. In the tests, a total of 36 samples bonded with single-lap adhesive were subjected to 30 Joule impact energy, and their mechanical strength was evaluated. In line with the experimental results, moisture absorption and axial impact energy values were compared in order to determine the most durable composite material connection, and the most durable connection was selected by evaluating the mechanical properties. Damage analysis on the samples was performed at the DEU Science and Technology Application and Research Center with ZEISS GEMINI SEM 560. (Oberkochen, Germany). The fracture surfaces of the CFRP and GFRP samples after gold coating were examined in detail with a scanning electron microscope, and their interface properties and internal structures were observed. The fracture toughness of GFRP specimens increased from 4.6% in a dry environment to 27.96% after 15 months in seawater. CFRP specimens increased from 4.2% in a dry environment to 11.96% after 15 months in seawater, but the increase was less pronounced compared to GFRP. According to the experimental results, CFRP samples exhibited superior mechanical performance compared to GFRP samples.

3 June 2026 in Journal of Energy and Power Technology
Verified
Journal Article
Open access
PDF file
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
SYSenai YALÇINKAYA
Senai YALÇINKAYA
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
The increasing demand for sustainable energy has accelerated the development of high-performance wind turbine systems. In this context, material selection for turbine blades plays a critical role in ensuring structural efficiency, fatigue resistance, and long-term reliability. This study evaluates the mechanical and structural advantages of carbon fiber-reinforced polymer (CFRP) composites over glass fiber-reinforced polymer (GFRP) materials in wind turbine blade applications. Results from the literature indicate that CFRP provides significantly higher stiffness-to-weight and strength-to-weight ratios, enabling weight reductions of 20-30% in critical blade components such as spar caps. This reduction improves aeroelastic stability, decreases fatigue loading, and enhances overall energy capture efficiency. Furthermore, CFRP exhibits superior fatigue resistance under cyclic loading conditions exceeding 108 cycles, which is essential for the typical 20-30 years service life of wind turbines. However, the higher cost of CFRP remains a limiting factor, leading to its selective use in load-critical regions. The findings suggest that hybrid material strategies combining GFRP and CFRP offer an optimal balance between cost and performance.

30 October 2026 in Progress in Composite Materials
Verified
Journal Article
Open access
PDF file
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
SYSenai YALÇINKAYA
Senai YALÇINKAYA
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
The tribological behavior of composite materials represents a crucial research domain in modern engineering due to the decisive impact of friction, wear, and surface interactions on operational performance. This study evaluates the material and operating-condition-dependent parameters that dictate the tribological response of composite materials, alongside their predominant wear mechanisms. A comprehensive synthesis of the literature demonstrates that matrix and reinforcement types, filler fraction, fiber orientation, surface topography, interfacial bonding strength, applied load, sliding velocity, and operating temperature significantly govern both the coefficient of friction and wear characteristics. While fiber reinforcement substantially enhances wear resistance when paired with strong interfacial adhesion, weak interfacial bonding accelerates failure mechanisms such as delamination and matrix/particle debonding. Depending on the operational conditions, composites exhibit competing wear mechanisms, including abrasive, adhesive, fatigue, and tribochemical wear. Furthermore, surface engineering strategies such as protective coatings, surface texturing, thermal treatments, and advanced lubrication effectively optimize tribological performance. Notably, hybrid composites incorporating solid lubricant additives demonstrate exceptional potential in minimizing friction and retarding wear rates. Integrating standard empirical testing (e.g., pin-on-disk and block-on-ring) with numerical simulations, finite element analysis (FEA), and artificial intelligence (AI)-assisted modeling offers a robust framework for enhancing design reliability. Overall, achieving optimal tribological performance in composite materials necessitates a holistic design approach that synergizes intrinsic material selection, tailored surface engineering, and operational constraints.

29 July 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
The decline in fossil fuels and environmental pollution have made renewable energy sources essential. In this context, solar and wind energy have come to the forefront to re-duce carbon emissions. While wind energy was previously used for agriculture and water pumping, today its largest contribution is electricity generation. It is rapidly gaining pop-ularity due to its environmental friendliness and affordability. Wind turbines consist of a tower, rotor, shaft, generator, and blades. Blades are critical for system efficiency and en-vironmental protection. While metal materials were initially used, composite materials have now been adopted. Composites offer properties such as light weight, durability, cor-rosion resistance, and long life. Approximately 95% of the composite material used in tur-bine blades is glass fiber and 5% is carbon fiber. The reasons for the preference of glass fi-ber-reinforced composites (GFRP) are low cost, light weight, easy raw material supply, and high mechanical strength. It also offers advantages such as impact resistance, fatigue life, corrosion resistance, and easy shaping during production. Thanks to these properties, glass fiber offers both an economical and structurally safe solution for large-scale blades. The aim of this study is to experimentally investigate the damage processes occurring in the adhesively bonded areas of fiber-reinforced polymer composite materials commonly used in offshore wind turbine blades. Carbon fiber-reinforced composites (CFRP) offer significantly higher strength and stiffness than glass fiber, enabling them to carry the same loads with thinner and lighter structures. However, due to its higher cost and more complex manufacturing process, the use of car-bon fiber is limited. It is generally used in specialized turbines or blade tips requiring high performance. While glass fiber offers an ideal solution for general use, carbon fiber is pre-ferred to a lesser extent as a support or complement in critical areas. GFRP and CFRP specimens were prepared as 7-layer and 8-layer laminates, respectively, using unidirec-tional twill weave with a 90° orientation. A total of 24 specimens were cut according to ASTM D5868-01. Epoxy and hardener were applied to the prepregs by hand lay-up, fol-lowed by a one-day curing process. After resin gelation, the composites were produced using a hot press method. To examine the marine performance of adhesively bonded joints, commonly used in offshore wind turbine blades, single-layer adhesively bonded specimens were conditioned in separate containers for 1, 2, and 3 months in natural sea-water obtained from the Aegean Sea at 21.0°C and with a salinity of 3.3–3.7%. During this period, the moisture absorption of the joints was weighed periodically using high-precision scales. The obtained data was compared with dry reference samples to characterize the moisture absorption behavior in terms of weight change (%). To evaluate the mechanical strength of the specimens under the influence of humidity, four-point bending tests were conducted in accordance with the ASTM D790 standard. The damage types and microstructural deteriorations observed during the tests were examined in detail using a ZEISS GEMINI SEM 560 scanning electron microscope (SEM), which pro-vides high-resolution imaging. These analyses provided comprehensive experimental findings regarding the physical and mechanical effects on adhesively bonded composite joints. In the experimental studies, maximum moisture absorption in GFRP specimens was: After 1, 2, and 3 months of seawater exposure, the moisture absorption rates were measured as 1.02%, 2.97%, and 3.78%, respectively. In CFRP samples tested under the same conditions, the moisture absorption rates were determined as 0.49%, 0.76%, and 0.91%, respectively. According to the results of the four-point bending tests, Young's modulus in GFRP sing-le-lap adhesively bonded joints decreased by 3.15%, 6.42%, and 9.45% for the respective durations compared to specimens tested in a dry environment. Similarly, Young's modu-lus in CFRP single-lap joints decreased by 1.29%, 2.62%, and 3.48% depending on the du-ration of moisture exposure. These results demonstrate that environmental conditions, particularly those of GFRP materials, have a more pronounced impact on their mechanical performance.