DUDU MERTGENÇ YOLDAŞ

Dr. DUDU MERTGENÇ YOLDAŞ

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
Since composite materials are light and corrosion-resistant, they have replaced many traditional materials in the aviation and marine industries. Composite materials have the advantages of a much higher strength–weight ratio, lower maintenance requirements, and the ability to form complex shapes, such as bodies, compared to carbon steel. In this study, the mechanical properties of glass fiber reinforced (GFRP) and carbon fiber reinforced (CFRP) composite materials were investigated in marine applications in which composite materials had been used. In this study, 0/90 oriented twill weave eight-ply GFRP and eight-ply CFRP composite materials were used, incorporating the hand lay-up method and hot-pressing method. Seawater was taken from the Aegean Sea, Izmir Province (Balçova/İnciraltı), and had an average temperature of 22.43 °C. This seawater was kept in different containers for 30 days and 60 days (a total of 1440 h of keeping in seawater) with the intent to test the GFRP and CFRP composite samples separately. The produced CFRP and GFRP sheets were then cut with a wet (circular) saw in accordance with the standard procedure in the Composite Research and Testing Laboratory of the Dokuz Eylul University Department of Mechanical Engineering. Moisture retention percentages and Charpy impact tests were carried out. Then, three-point bending tests were carried out according to TS EN ISO 14125. The damage in the material was examined using a ZEISS Stereo Discovery.V12 imaging microscope (Oberkochen, Germany). The mechanical properties of CFRP- and GFRP-reinforced composite samples before and after aging were investigated using the Charpy impact test and three-point bending test. Then, the effects of the seawater environment on the mechanical properties of the CFRP and GFRP composite materials were evaluated by comparing the results. The aim was to better understand what kind of damage would occur in GFRP and CFRP composite materials given the effects of seawater and at what stages changes would occur in the mechanical properties of these materials. Moisture retention rates (%) in the tested samples after the Charpy impact test were 2.56% in GFRP and 0.47% in CFRP after 30 days. In the tested samples after the three-point bending test, these values were 1.41% in GFRP and 0.31% in CFRP after 30 days. Subsequent to the Charpy impact tests, the fracture toughness values of the CFRP samples tested at the 30 J impact energy level before aging in seawater conditions for 30 days or 60 days were found to be increased by 15.79% and 21.08%, respectively. The fracture toughness values of the GFRP tested at the 30 J impact energy level in dry conditions and kept in seawater for 30 days or 60 days were found to be 27.69% and 29.23%, respectively. The energy absorbed during the impact tests by the GFRP samples was higher than in the CFRP samples. This showed that the GFRP samples were more brittle. Subsequent to the three-point bending tests, the CFRP composite samples kept in seawater for periods of 30 days and 60 days showed changes in the modulus of elasticity of 7.48% and 7.46%, respectively, compared to the dry samples. The GFRP composite samples kept in seawater for periods of 30 days and 60 days showed changes in the modulus of elasticity of 7.015% and 11.53%, respectively, compared to the dry samples. The change in the modulus of elasticity was less in the CFRP samples than in GFRP. All of these results showed that the mechanical properties of CFRP were better than those of GFRP.

18 December 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
GAGurcan ATAKOK
Gurcan ATAKOK
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
Macroscopic structures consisting of two or more materials are called composites. The decreasing reserves of the world’s oil reserve and the environmental pollution of existing energy and production resources made the use of recycling methods inevitable. There are mechanical, thermal, and chemical recycling methods for the recycling of thermosets among composite materials. The recycling of thermoset composite materials economically saves resources and energy in the production of reinforcement and matrix materials. Due to the superior properties such as hardness, strength, lightness, corrosion resistance, design width, and the flexibility of epoxy/vinylester/polyester fibre formation composite materials combined with thermoset resin at the macro level, environmentally friendly sustainable development is happening with the increasing use of composite materials in many fields such as the maritime sector, space technology, wind energy, the manufacturing of medical devices, robot technology, the chemical industry, electrical electronic technology, the construction and building sector, the automotive sector, the defence industry, the aviation sector, the food and agriculture sector, and sports equipment manufacturing. Bonded joint studies in composite materials have generally been investigated at the level of a single composite material and single joint. The uncertainty of the long-term effects of different composite materials and environmental factors in single-lap bonded joints is an important obstacle in applications. The aim of this study is to investigate the effects of single-lap bonded GFRP (glass fibre-reinforced polymer) and CFRP (carbon fibre-reinforced polymer) specimens on the material at the end of seawater exposure. In this study, 0/90 orientation twill weave seven-ply GFRP and eight-ply CFRP composite materials were used in dry conditions (without seawater soaking) and the hand lay-up method. Seawater was taken from the Aegean Sea, İzmir province (Selçuk/Pamucak), in September at 23.5 °C. This seawater was kept in different containers in seawater for 1 month (30 days), 2 months (60 days), and 3 months (90 days) separately for GFRP and CFRP composite samples. They were cut according to ASTM D5868-01 for single-lap joint connections. Moisture retention percentages and axial impact tests were performed. Three-point bending tests were then performed according to ASTM D790. Damage to the material was examined with a ZEISS GEMINESEM 560 scanning electron microscope (SEM). The SEM was used to observe the interface properties and microstructure of the fracture surfaces of the composite samples by scanning images with a focused electron beam. Damage analysis imaging was performed on CFRP and GFRP specimens after sputtering with a gold compound. Moisture retention rates (%), axial impact tests, and three-point bending test specimens were kept in seawater with a seawater salinity of 3.3–3.7% and a seawater temperature of 23.5 °C for 1, 2, and 3 months. Moisture retention rates (%) are 0.66%, 3.43%, and 4.16% for GFRP single-lap bonded joints in a dry environment and joints kept for 1, 2, and 3 months, respectively. In CFRP single-lap bonded joints, it is 0.57%, 0.86%, and 0.87%, respectively. As a result of axial impact tests, under a 30 J impact energy level, the fracture toughness of GFRP single-lap bonded joints kept in a dry environment and seawater for 1, 2, and 3 months are 4.6%, 9.1%, 14.7%, and 11.23%, respectively. At the 30 J impact energy level, the fracture toughness values of CFRP single-lap bonded joints in a dry environment and in seawater for 1, 2, and 3 months were 4.2%, 5.3%, 6.4%, and 6.1%, respectively. As a result of three-point bending tests, GFRP single-lap joints showed a 5.94%, 8.90%, and 12.98% decrease in Young’s modulus compared to dry joints kept in seawater for 1, 2, and 3 months, respectively. CFRP single-lap joints showed that Young’s modulus decreased by 1.28%, 3.39%, and 3.74% compared to dry joints kept in seawater for 1, 2, and 3 months, respectively. Comparing the GFRP and CFRP specimens formed by a single-lap bonded connection, the moisture retention percentages of GFRP specimens and the amount of energy absorbed in axial impact tests increased with the soaking time in seawater, while Young’s modulus was less in three-point bending tests, indicating that CFRP specimens have better mechanical properties.

17 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
Composite materials have the advantages of high strength and low weight, and are therefore used in many areas. However, in humid and marine environments, mechanical properties may deteriorate due to moisture diffusion, especially in glass fiber reinforced polymers (GFRP) and carbon fiber reinforced polymers (CFRP). This study investigated the damage formation and changes in mechanical properties of single-layer adhesive-bonded GFRP and CFRP connections under the effect of sea water. In the experiment, 0/90 orientation, twill-woven GFRP (7 ply) and CFRP (8 ply) plates were produced as prepreg using the hand lay-up method in accordance with ASTM D5868-01 standard. CNC Router was used to cut 36 samples were cut from the plates produced for the experiments. The samples were kept in sea water taken from the Aegean Sea, at 3.3–3.7% salinity and 23.5 °C temperature, for 1, 2, 3, 6, and 15 months. Moisture absorption was monitored by periodic weighings; then, the connections were subjected to three-point bending tests according to the ASTM D790 standard. The damages were analyzed microscopically with SEM (ZEISS GEMINI SEM 560). As a result of 15 months of seawater storage, moisture absorption reached 4.83% in GFRP and 0.96% in CFRP. According to the three-point bending tests, the Young modulus of GFRP connections decreased by 25.23% compared to dry samples; this decrease was 11.13% in CFRP. Moisture diffusion and retention behavior were analyzed according to Fick’s laws, and the moisture transfer mechanism of single-lap adhesively bonded composites under the effect of seawater was evaluated.

5 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
SYSenai YALÇINKAYA
Senai YALÇINKAYA
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
The depletion of fossil fuels and the rise of environmental concerns have increased the importance of renewable energy sources, positioning wind energy as a key alternative. Modern wind turbine blades are predominantly manufactured from composite materials due to their light weight, high strength, and resistance to corrosion. In offshore applications, approximately 95% of the composite content is glass fiber-reinforced polymer (GFRP), while the remaining 5% is carbon fiber-reinforced polymer (CFRP). GFRP is favored for its low cost and fatigue resistance, whereas CFRP offers superior strength and stiffness but is limited by high production costs. This study investigates the durability of adhesively bonded GFRP and CFRP joints under marine exposure. Seven-layer GFRP and eight-layer CFRP laminates were produced using a 90° unidirectional twill weave and prepared in accordance with ASTM D5868-01. Specimens were immersed in natural Aegean Sea water (21 °C, salinity 3.3–3.7%) for 1, 2, and 3 months. Measurements revealed that GFRP absorbed significantly more moisture (1.02%, 2.97%, 3.78%) than CFRP (0.49%, 0.76%, 0.91%). Four-point bending tests conducted according to ASTM D790 showed reductions in Young’s modulus of up to 9.45% for GFRP and 3.48% for CFRP. Scanning electron microscopy (SEM) confirmed that moisture-induced degradation was more severe in GFRP joints compared to CFRP. These findings highlight the critical role of environmental exposure in the mechanical performance of marine composite joints.

14 February 2026 in Polymers
Verified
Journal Article
Open access
PDF file
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
GAGurcan ATAKOK
Gurcan ATAKOK
The aim of this study is to experimentally evaluate the damage mechanisms occurring in the adhesive-bonded regions of glass fiber-reinforced polymer (GFRP) and carbon fiber-reinforced polymer (CFRP) composites, which are widely used in marine and offshore wind turbine applications, under environmental conditions. In particular, this study focuses on the degradation caused by long-term seawater exposure and its effects on the bending behavior and load-carrying capacity of adhesive joints. For this purpose, the specimens were prepared in accordance with ASTM D5868-01, using 7-layer GFRP and 8-layer CFRP laminates. Single-lap adhesive joints were fabricated. To simulate marine environmental conditions, the single-lap adhesive joints were immersed in natural seawater obtained from the Aegean Sea (22 °C temperature and 3.3–3.7% salinity) for 1, 2, and 3 months in separate containers. Three-point bending (3PB) tests were performed on specimens representing marine applications, while four-point bending (4PB) tests were conducted on specimens representing offshore wind turbine blade structures. The results quantitatively revealed the influence of seawater on adhesive-bonded composite joints. In 3PB tests, the reductions in the Young’s modulus of GFRP specimens after 1, 2, and 3 months of exposure were measured as 5.94%, 8.90%, and 12.98%, respectively. For CFRP specimens, degradation was more limited, with corresponding reductions of 1.28%, 3.39%, and 3.74%. A similar trend was observed in 4PB tests representing offshore wind turbine applications, where GFRP joints exhibited modulus reductions of 3.15%, 6.42%, and 9.45%, while CFRP joints showed reductions of 1.29%, 2.62%, and 3.48% for the same exposure durations. Overall, the findings demonstrate that CFRP composites exhibit more stable mechanical behavior under environmental exposure, whereas GFRP structures undergo more pronounced performance losses, particularly in moisture- and salt-rich environments. These results highlight the critical importance of material selection for long-term durability in offshore composite structures. The outcomes of this study contribute to a better understanding of the damage processes occurring in composite adhesive joints under environmental conditions and provide a scientific basis for developing more reliable design and material selection strategies in both the marine and wind energy sectors.

Verified
Journal Article
Open access
PDF file
DYDUDU MERTGENÇ YOLDAŞ
DUDU MERTGENÇ YOLDAŞ
MYMEHMET FATİH YOLDAŞ
MEHMET FATİH YOLDAŞ
In this study, the effects of exposure to seawater on the material properties of glass fiber-reinforced polymer (GFRP) and carbon fiber-reinforced polymer (CFRP) samples were investigated. The samples were stored in seawater with a salinity of 3.3–3.7% and a temperature of 23.5 °C taken from the Aegean Sea in September for different periods (1, 2, 3, 6 and 15 months). The samples prepared in accordance with the ASTM D5868-01 standard were subjected to axial impact testing. In the first stage of this study, moisture retention percentages were determined, and, then, axial impact tests were performed. In the tests, a total of 36 samples bonded with single-lap adhesive were subjected to 30 Joule impact energy, and their mechanical strength was evaluated. In line with the experimental results, moisture absorption and axial impact energy values were compared in order to determine the most durable composite material connection, and the most durable connection was selected by evaluating the mechanical properties. Damage analysis on the samples was performed at the DEU Science and Technology Application and Research Center with ZEISS GEMINI SEM 560. (Oberkochen, Germany). The fracture surfaces of the CFRP and GFRP samples after gold coating were examined in detail with a scanning electron microscope, and their interface properties and internal structures were observed. The fracture toughness of GFRP specimens increased from 4.6% in a dry environment to 27.96% after 15 months in seawater. CFRP specimens increased from 4.2% in a dry environment to 11.96% after 15 months in seawater, but the increase was less pronounced compared to GFRP. According to the experimental results, CFRP samples exhibited superior mechanical performance compared to GFRP samples.