Recently we proposed a novel polarimetric method, based on Stokes polarimetry, enabling the characterization of the linear retardance and its flicker amplitude in electro-optic devices behaving as variable linear retarders. In this work we apply extensively the technique to parallel-aligned liquid crystal on silicon devices (PA-LCoS) under the most typical working conditions. As a previous step we provide some experimental analysis to delimitate the robustness of the technique dealing with its repeatability and its reproducibility. Then we analyze the dependencies of retardance and flicker for different digital sequence formats and for a wide variety of working geometries.
1 August 2010 in Mathematical and Computer Modelling
A polarimetric method for the measurement of linear retardance in the presence of phase fluctuations is presented. This can be applied to electro-optic devices behaving as variable linear retarders. The method is based on an extended Mueller matrix model for the linear retarder containing the time-averaged effects of the instabilities. As a result, an averaged Stokes polarimetry technique is proposed to characterize both the retardance and its flicker magnitude. Predictive capability of the approach is experimentally demonstrated, validating the model and the calibration technique. The approach is applied to liquid crystal on silicon displays (LCoS) using a commercial Stokes polarimeter. Both the magnitude of the average retardance and the amplitude of its fluctuation are obtained for each gray level value addressed, thus enabling a complete phase characterization of the LCoS.
Interference and diffraction of light are elementary topics in optics. The aim of the work presented here is to develop an accurate and cheap optical-system simulation software that provides a virtual laboratory for studying the effects of propagation in both time and space for the near- and far-field regions. In laboratory sessions, this software can let optical engineering undergraduates simulate many optical systems based on thin slits. The numerical method used is the finite-difference time-domain (FDTD) method that has been successfully applied in many engineering fields. Using this numerical method, the irradiance distribution can be successfully evaluated in different planes far from the simulation grid without degrading performance. In addition, an easy-to-use MATLAB GUI handles all the parameters of the FDTD simulation and computes theoretical values of irradiance for both the Fresnel and Fraunhofer regions. Therefore, by using this software, the student is able to analyze the behavior of the Fresnel and Fraunhofer expressions as a function of the distance. This distance is defined as the space between the slits plane and the plane that contains the virtual screen on which the irradiance pattern is represented.
Parallel aligned liquid crystal on silicon (PA-LCoS) displays have found wide acceptance in applications requiring phase-only modulation. Among LCoS devices, and PA-LCoS as a specific case, digital addressing has become a very common technology. In principle, modern digital technology provides some benefits with respect to analog addressing such as reduced interpixel cross-talk, lower power consumption and supply voltage, gray level scale repeatability, high programmability, and noise robustness. However, there are also some degradating issues, such as flicker, which may be enhanced. We analyze the characteristics of the digital pulse width modulated voltage signals in relation to their effect on the optical modulation capabilities of LCoS displays. We apply calibration techniques developed in our laboratory, basically the classical linear polarimeter extended to take into account the existence of flicker. Various digital sequence formats are discussed, focusing the analysis on the variations in the magnitude of the applied voltages across the LC layer. From this analysis, we obtain how to amplify the retardance dynamic range and how to enhance linearity in the device without enhancing flicker and without diminishing the number of available quantization levels. Electrical configurations intended for phase-only and intensity modulation regimes, useful in diffractive optics, are given.