Recently we proposed a novel polarimetric method, based on Stokes polarimetry, enabling the characterization of the linear retardance and its flicker amplitude in electro-optic devices behaving as variable linear retarders. In this work we apply extensively the technique to parallel-aligned liquid crystal on silicon devices (PA-LCoS) under the most typical working conditions. As a previous step we provide some experimental analysis to delimitate the robustness of the technique dealing with its repeatability and its reproducibility. Then we analyze the dependencies of retardance and flicker for different digital sequence formats and for a wide variety of working geometries.
A polarimetric method for the measurement of linear retardance in the presence of phase fluctuations is presented. This can be applied to electro-optic devices behaving as variable linear retarders. The method is based on an extended Mueller matrix model for the linear retarder containing the time-averaged effects of the instabilities. As a result, an averaged Stokes polarimetry technique is proposed to characterize both the retardance and its flicker magnitude. Predictive capability of the approach is experimentally demonstrated, validating the model and the calibration technique. The approach is applied to liquid crystal on silicon displays (LCoS) using a commercial Stokes polarimeter. Both the magnitude of the average retardance and the amplitude of its fluctuation are obtained for each gray level value addressed, thus enabling a complete phase characterization of the LCoS.
Parallel aligned liquid crystal on silicon (PA-LCoS) displays have found wide acceptance in applications requiring phase-only modulation. Among LCoS devices, and PA-LCoS as a specific case, digital addressing has become a very common technology. In principle, modern digital technology provides some benefits with respect to analog addressing such as reduced interpixel cross-talk, lower power consumption and supply voltage, gray level scale repeatability, high programmability, and noise robustness. However, there are also some degradating issues, such as flicker, which may be enhanced. We analyze the characteristics of the digital pulse width modulated voltage signals in relation to their effect on the optical modulation capabilities of LCoS displays. We apply calibration techniques developed in our laboratory, basically the classical linear polarimeter extended to take into account the existence of flicker. Various digital sequence formats are discussed, focusing the analysis on the variations in the magnitude of the applied voltages across the LC layer. From this analysis, we obtain how to amplify the retardance dynamic range and how to enhance linearity in the device without enhancing flicker and without diminishing the number of available quantization levels. Electrical configurations intended for phase-only and intensity modulation regimes, useful in diffractive optics, are given.
We focus on the novelty of three elements in holographic data storage systems (HDSS): the data pager, where we introduce a parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplay; the recording material, where we consider the highly versatile PVA/AA photopolymer; and also in the architecture of the object arm, where a convergent correlator system is introduced. We show that PA-LCoS devices cannot implement pure hybrid-ternary modulated (HTM) data pages but a rather close approximation. Validation of the HDSS expressions for the convergent correlator and comparison with the widespread 4-f system is performed. Experimental results with PVA/AA material showing bit-error rates (BER) in the range of 10−3, further show its potential application for HDSS, and also demonstrate the validity of the testing platform and PA-LCoS calibration and optimization.
We focus on the evaluation of the applicability of the classical and well-established linear polarimeter to the measurement of linear retardance in the presence of phase flicker. This analysis shows that there are large errors in the results provided by the linear polarimeter when measuring the linear retardance of a device. These errors depend on the specific retardance value under measurement. We show that there are some points where this limitation can be used to measure the fluctuation amplitude consistently. An elegant method is further proposed, enabling the measurement of the average retardance value, thus extending the applicability of the classical linear polarimeter. Experimental characterization results are provided for various electrical sequences addressed onto a parallel aligned liquid crystal on silicon (LCoS) display. Good agreement is obtained with experiment, thus validating the linear polarimeter methodology proposed. Furthermore, results are provided for the LCoS in two reflection geometries, perpendicular incidence with and without nonpolarizing beam splitter, demonstrating robustness of the method. As a result, the evaluation of both phase modulation range and flicker magnitude for any electrical sequence addressed can be easily obtained, which is very important for optimal use of LCoS displays in applications.