The recovery of scandium (Sc) from wastes and various resources using solvent extraction (SX) was discussed in detail. Moreover, the metallurgical extractive procedures for Sc recovery were presented. Acidic and neutral organophosphorus (OPCs) extractants are the most extensively used in industrial activities, considering that they provide the highest extraction efficiency of any of the valuable components. Due to the chemical and physical similarities of the rare earth metals, the separation and purification processes of Sc are difficult tasks. Sc has also been extracted from acidic solutions using carboxylic acids, amines, and acidic β-diketone, among other solvents and chemicals. For improving the extraction efficiencies, the development of mixed extractants or synergistic systems for the SX of Sc has been carried out in recent years. Different operational parameters play an important role in the extraction process, such as the type of the aqueous phase and its acidity, the aqueous (A) to organic (O) and solid (S) to liquid (L) phase ratios, as well as the type of the diluents. Sc recovery is now implemented in industrial production using a combination of hydrometallurgical and pyrometallurgical techniques, such as ore pre-treatment, leaching, SX, precipitation, and calcination. The hydrometallurgical methods (acid leaching and SX) were effective for Sc recovery. Furthermore, the OPCs bis(2-ethylhexyl) phosphoric acid (D2EHPA/P204) and tributyl phosphate (TBP) showed interesting potential taking into consideration some co-extracted metals such as Fe(III) and Ti(IV).

The purpose of this work was to develop, characterize and test new low-cost materials suitable for removing methylene blue dye from water and wastewater by adsorption. The solid materials consisted of silica gel powder (SG), silica gel mixed with eggshell powder (SG-ES) and a mixture of silica gel with sand from the western Iraqi desert (SG-SI). The samples were milled by using an electrical mixer and a ball mill, followed by a drying step. In addition, desert sand was acid-treated in order to remove impurities. The structure and chemical composition of the samples were investigated by X-ray diffraction (XRD), a scanning electron microscopy technique equipped with an energy-dispersive X-ray spectrometer (SEM-EDX), a low-temperature nitrogen adsorption (BET) technique, thermo-analytical (TG/TGA) measurements and Fourier-transformed infrared spectroscopy (FTIR). The previously mentioned materials were tested to remove methylene blue from an aqueous solution. The adsorption experiments were monitored by ultraviolet–visible (UV-Vis) spectrophotometry and showed that SG and SG-ES gave promising results for the methylene blue removal from water. After 40 min of treatment of the aqueous solution containing 10 mg/L of MB at room temperature, the tested SG, SG-ES and SG-SI materials were found to have 86%, 80% and 57% dye adsorption efficiency, respectively. Taking into consideration not only the adsorption activity of the studied material but their availability, cost and concepts of cleaner production and waste minimization, the developed silica gel with eggshell can be considered as a good, cost-effective alternative to commercially available activated-carbon-based adsorbents. Different kinetic and isotherm models were fitted to the experimental results. A pseudo-second-kinetics-order model revealed high correlation fitting, while the Freundlich model was found to appropriately describe the adsorption isotherm. The thermal stability during the possible regeneration process of the SG-ES adsorbent mixture and its interaction mechanism with cationic dye was discussed.