Much has been written about the fundamental aspects of the metal–organic frameworks (MOFs). Still, details concerning the MOFs with structural flexibility are not comprehensively understood. However, a dramatic increase in research activities concerning rigid MOFs over the years has brought deeper levels of understanding for their properties and applications. Nonetheless, robustness and flexibility of such smart frameworks are intriguing for different research areas such as catalysis, adsorption, etc. This manuscript overviews the different aspects of framework flexibility. The review has touched lightly on several ideas and proposals, which have been demonstrated within the selected examples to provide a logical basis to obtain a fundamental understanding of their synthesis and behavior to external stimuli.

The recovery of scandium (Sc) from wastes and various resources using solvent extraction (SX) was discussed in detail. Moreover, the metallurgical extractive procedures for Sc recovery were presented. Acidic and neutral organophosphorus (OPCs) extractants are the most extensively used in industrial activities, considering that they provide the highest extraction efficiency of any of the valuable components. Due to the chemical and physical similarities of the rare earth metals, the separation and purification processes of Sc are difficult tasks. Sc has also been extracted from acidic solutions using carboxylic acids, amines, and acidic β-diketone, among other solvents and chemicals. For improving the extraction efficiencies, the development of mixed extractants or synergistic systems for the SX of Sc has been carried out in recent years. Different operational parameters play an important role in the extraction process, such as the type of the aqueous phase and its acidity, the aqueous (A) to organic (O) and solid (S) to liquid (L) phase ratios, as well as the type of the diluents. Sc recovery is now implemented in industrial production using a combination of hydrometallurgical and pyrometallurgical techniques, such as ore pre-treatment, leaching, SX, precipitation, and calcination. The hydrometallurgical methods (acid leaching and SX) were effective for Sc recovery. Furthermore, the OPCs bis(2-ethylhexyl) phosphoric acid (D2EHPA/P204) and tributyl phosphate (TBP) showed interesting potential taking into consideration some co-extracted metals such as Fe(III) and Ti(IV).

In this research, multi-walled carbon nanotubes (MWCNTs) were functionalized by oxidation with strong acids HNO₃, H₂SO₄, and H₂O₂. Then, magnetite/MWCNTs nanocomposites were prepared and polystyrene was added to prepare polystyrene/MWCNTs/magnetite (PS:MWCNTs:Fe) nanocomposites. The magnetic property of the prepared nano-adsorbent PS:MWCNTs:Fe was successfully checked. For characterization, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and BET surface area were used to determine the structure, morphology, chemical nature, functional groups, and surface area with pore volume of the prepared nano-adsorbents. The adsorption procedures were carried out for fresh MWCNTs, oxidized MWCNTs, MWCNTs-Fe, and PS:MWCNTs:Fe nanocomposites in batch experiments. Toluene standard was used to develop the calibration curve. The results of toluene adsorption experiments exhibited that the PS:MWCNTs:Fe nonabsorbent achieved the highest removal efficiency and adsorption capacity of toluene removal. The optimum parameters for toluene removal from water were found to be 60 min, 2 mg nano-sorbent dose, pH of 5, solution temperature of 35 °C at 50 mL volume, toluene concentration of 50 mg/L, and shaking speed of 240 rpm. The adsorption kinetic study of toluene followed the pseudo-second-order kinetics, with the best correlation (R²) value of 0.998, while the equilibrium adsorption study showed that the Langmuir isotherm was obeyed, which suggested that the adsorption is a monolayer and homogenous.

Catalysts for visible-light-driven oxidative cleaning processes and antibacterial applications (also in the dark) were developed. In order to extend the photoactivity of titanium dioxide into the visible region, nitrogen-doped TiO₂ catalysts with hollow and non-hollow structures were synthesized by co-precipitation (NT-A) and sol–gel (NT-U) methods, respectively. To increase their photocatalytic and antibacterial efficiencies, various amounts of silver were successfully loaded on the surfaces of these catalysts by using a facile photo-deposition technique. Their physical and chemical properties were evaluated by using scanning electron microscopy (SEM), transmission electron microscopy–energy dispersive X-ray spectroscopy (TEM–EDS), Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). The photocatalytic performances of the synthesized catalysts were examined in coumarin and 1,4-hydroquinone solutions. The results showed that the hollow structure of NT-A played an important role in obtaining high specific surface area and appreciable photoactivity. In addition, Ag-loading on the surface of non-hollow structured NT-U could double the photocatalytic performance with an optimum Ag concentration of 10⁻⁶ mol g⁻¹, while a slight but monotonous decrease was caused in this respect for the hollow surface of NTA upon increasing Ag concentration. Comparing the catalysts with different structures regarding the photocatalytic performance, silverized non-hollow NT-U proved competitive with the hollow NT-A catalyst without Ag-loading for efficient visible-light-driven photocatalytic oxidative degradations. The former one, due to the silver nanoparticles on the catalyst surface, displayed an appreciable antibacterial activity, which was comparable to that of a reference material practically applied for disinfection in polymer coatings.

In this paper, the application of multiwalled carbon nanotubes (MWCNTs) based on metal oxide nanocomposites as adsorbents for the removal of hydrocarbons such as kerosene from water was investigated. Functionalized MWCNTs were obtained by chemical oxidation using concentrated sulfuric and nitric acids. V₂O₅, CeO_2, and V₂O₅:CeO₂ nanocomposites were prepared using the hydrothermal method followed by deposition of these oxides over MWCNTs. Individual and mixed metal oxides, fresh MWCNTs, and metal oxide nanoparticle-doped MWCNTs using different analysis techniques were characterized. XRD, TEM, SEM, EDX, AFM, Raman, TG/DTA, and BET techniques were used to determine the structure as well as chemical and morphological properties of the newly prepared adsorbents. Fresh MWCNTs, Ce/MWCNTs, V/MWCNTs, and V:Ce/MWCNTs were applied for the removal of kerosene from a model solution of water. GC analysis indicated that high kerosene removal efficiency (85%) and adsorption capacity (4270 mg/g) after 60 min of treatment were obtained over V:Ce/MWCNTs in comparison with fresh MWCNTs, Ce/MWCNTs and V/MWCNTs. The kinetic data were analyzed using the pseudo-first order, pseudo-second order, and intra-particle diffusion rate equations.

The aim of this study was to prepare novel supramolecular hybrid nanoparticles (HNPs) that can selectively separate and recover scandium metal ions, Sc(III), from an aqueous phase based on molecular recognition technology (MRT). Moreover, this approach is fully compatible with green chemistry principles. In this work, natural amorphous silica (SiO₂) nanoparticles were prepared by a precipitation method from Iraqi rice husk (RH) followed by surface modification with 3-amino-propyl triethoxysilane (APTES) as coupling agent and Kryptofix 2.2.2 (K2.2.2) as polycyclic ligand. To evaluate the potential of the hybrid nanoparticles, the prepared HNPs were used for the solid–liquid extraction of scandium, Sc(III), ions from model solutions due to the fact that K2.2.2 are polycyclic molecules. These polycyclic molecules are able to encapsulate cations according to the corresponding cavity size with the ionic radius of metal by providing a higher protection due their cage-like structures. Moreover, the authors set the objectives to design a high-technology process using these HNPs and to develop a Sc recovery method from the aqueous model solution prior to employing it in industrial applications, e.g., for Sc recovery from red mud leachate. The concentrations of Sc model solutions were investigated using the UV-Vis spectrophotometer technique. Different characterization techniques were used including scanning electron microscope (SEM), atomic force microscopy (AFM), Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), X-ray fluorescence (XRF), and Fourier transform infrared (FTIR). The extraction efficiency of Sc varied from 81.3% to 96.7%. Moreover, the complexed Sc ions were efficiently recovered by HCl with 0.1 mol/L concentration. The stripping ratios of Sc obtained ranged from 93.1% to 97.8%.