An organic dual-wavelength distributed feedback (DFB) laser empowered by a dye-doped holographic polymer dispersed liquid crystal (HPDLC) grating is reported for the first time. The dual-wavelength laser operates at 586.6 nm and 670.2 nm simultaneously in one laser beam via the seventh and eighth Bragg orders of a one dimensional (1D) HPDLC grating with a special period. We theoretically and experimentally demonstrate the mechanism of our dual-wavelength DFB laser and investigate the threshold and spectral properties of the output laser. Our organic dual-wavelength DFB laser shows the advantages of simple configuration, one-step fabrication, cost-effectiveness and the potential application to be integrated in all optical networks.
A low threshold, high energy conversion organic distributed feedback laser based on a holographic polymer dispersed liquid crystal as an external light feedback layer was reported.
An organic dual-wavelength surface-emitting distributed feedback (DFB) laser based on a waveguide configuration containing a holographic photo-curable polymer/liquid crystal (LC) periodic structure and two laser gain media is reported for the first time. In such a laser configuration, a laser dye [4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran, DCM]-doped polymer/LC periodic grating was formed on the top of a semiconducting laser gain [poly(2-methoxy-5-(2′-ethyl-hexyloxy)-p-phenylenevinylene), MEH-PPV] layer. A dual-wavelength laser emission at 627.8 nm and 606.6 nm was obtained from the two different laser gain media. The working mechanism of the two lasing behaviors and the methods to modulate lasing wavelength positions are elaborated and demonstrated, which shows the potential to extend the applications of organic lasers.
25 October 2016 in Journal of Physics D: Applied Physics
Holographic polymer dispersed liquid crystal (HPDLC) based distributed feedback (DFB) lasers were prepared with poly (-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene-vinylene) (MEH-PPV) film as the active medium layer. The HPDLC grating film was fabricated via holographic induced photopolymerization. The pure film spectra of MEH-PPV and the amplified spontaneous emission (ASE) spectrum were investigated. The laser device was single-longitudinal mode operation. The tunability of the HPDLC DFB laser was achieved by selecting different grating periods. The lasing performances were also characterized and compared from different diffraction orders. The lasing threshold increased with the diffraction order and the third order laser possessed the largest conversion efficiency in this device. The experimental results were in good agreement with the theoretical calculations.
Anisotropic waveguide theory is developed for electrically tunable distributed feedback (DFB) laser from dye-doped holographic polymer dispersed liquid crystal (HPDLC) grating. The period grating structure, optical anisotropy of the liquid crystal (LC) and practical light propagation path in the HPDLC have been considered. The emitted lasing wavelength is deduced on basis of the dielectric anisotropy of the LC, transverse-magnetic (TM) light wave propagation in the core layer and DFB laser theory. An experimental method to determine the tilt angle of the LC and the lasing behaviours under different electric fields are used to verify the validity of the anisotropic numerical analysis. The results show that a more accurate agreement between the theoretical calculations and the experimental data is achieved. The anisotropic numerical analysis presented here is very useful when designing and optimising tunable lasers for optical communications and integrated optics.
Systematic experiments were performed to investigate solvent-dependent morphology and aggregation of the semiconducting polymer film poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV), which was span-cast from nonaromatic strong polarity solvents tetrahydrofuran (THF), trichloromethane (TCM) and aromatic weak polarity solvents chlorobenzene (CB), toluene, and p-xylene. The results indicated that the conformation of the spin-cast MEH-PPV films with weak aggregation such as THF and TCM demonstrated excellent lasing emission performances because of inhibiting the fluorescence quenching induced by bi-molecule process. The Atomic Force Microscope (AFM) images confirmed the distinct morphologies of the spin-cast MEH-PPV films. The amplified spontaneous emission (ASE) was investigated in a simple asymmetric slab planar waveguide structure by methods of variable stripe length (VSL) and shifting excitation stripe (SES). The amplified spontaneous emission (ASE) experiments confirmed the distinct polymer chain conformation. The conformation, which preserved from the spin-cast process, indicated the distinct interactions between solvents and MEH-PPV polymer chains. The pure film spectra were performed to confirm the effect of distinct conformation on the material energy level. This work provides insights into the morphology and aggregation effect of the spin-cast polymer films on the performances of lasers.