High-shielding coefficient and low-noise magnetic shielding systems play an important role in the field of ultrahigh-sensitive magnetic field sensors and biomagnetism measurements. Currently, the magnetic shielding systems often suffer from high intrinsic magnetic noise generated by μ-metal. In this study, cobalt-based metallic glass with high permeability and excellent soft magnetic properties was employed to design magnetic shielding cylinders with an inner diameter of 240 mm. Using the Finite Element Method simulation, the shielding coefficient S of the single-layer cobalt-based metallic glass (20 μm thickness) magnetic shielding cylinder was 11.27 for the geomagnetic field. The magnetic noise characteristics of cobalt-based metallic glass magnetic shielding cylinder were analyzed based on complex permeability and resistivity in the obtained frequency band. In addition, we also experimentally studied the effectiveness of cobalt-based metallic glass magnetic shielding cylinder with different layers, when used as the innermost magnetic shielding layer, in suppressing the magnetic noise generated by μ-metal. The experimental results show that the minimum magnetic noise of the ten-layer cobalt-based metallic glass magnetic shielding cylinder is only 1.3 fT/Hz1/2, which indicates that cobalt-based metallic glass as an innermost magnetic shielding layer material can effectively reduce the magnetic noise generated by μ-metal and verifies the superiority of cobalt-based metallic glass in achieving low noise. Moreover, the ultra-thin structure and low cost of the cobalt-based metallic glass magnetic shielding cylinder offer significant advantages for other applications requiring the measurement of extremely weak magnetic fields. This study confirms the potential of cobalt-based metallic glass in improving the performance of magnetic shielding systems.
Cobalt-based metallic glasses have sparked intensive attention because of their extraordinary properties. In this work, a series of Co66Fe4Mo2-xTaxSi16B12 (x = 0, 0.5, 1.0, 1.5, 2.0) metallic glass ribbons were systematically designed to investigate the influence of the minor Ta substitution for Mo on the thermal behavior and magnetic performance. The results reveal that the width of the supercooled liquid region initially increases with Ta content, reaching 98 K at x = 1.0, and subsequently decreases with further Ta addition. It indicates that the Co66Fe4Mo1.0Ta1.0Si16B12 alloy has the optimal glass-forming ability. Moreover, the crystallization onset temperature and crystallization peak temperature of all as-quenched ribbons were improved with the Ta content x increasing to 2.0, which is due to the higher melting temperature of the element Ta (3290 K). In addition, these ribbons exhibit outstanding soft magnetic properties, including ultralow coercivity (Hc < 1.1 A/m) and moderate saturation magnetization, which indicates that these ribbons are suitable for magnetic shielding. These results offer valuable insights into the design of soft magnetic metallic glass.
20 November 2025 in Journal of Alloys and Compounds
The precision measurement of extremely weak magnetic fields using spin‐exchange relaxation‐free atomic magnetometers demands magnetic shielding system with high shielding efficiency and low magnetic noise. Conventional magnetic shielding system (CMSS) based on µ ‐metal, however, often exhibits high magnetic noise. Herein, we propose a strategy to overcome this challenge, which is realized by using the Fe‐based nanocrystalline (Fe‐Nano) magnetic shielding cylinder (MSC) as the innermost magnetic shield of CMSS. The Fe‐based nanocrystals (Fe‐Nanos) prepared via the melt‐spinning method followed by a three‐step annealing process exhibit excellent soft magnetic properties with the permeability of 64 000, indicating superior magnetic shielding performance. The average loss factor of the Fe‐Nanos is only 2.4 × 10 −7 , which is significantly lower than that of µ ‐metal and indicates that Fe‐Nanos has lower intrinsic magnetization noise. The Fe‐Nano MSC with different thicknesses significantly suppresses magnetic noise when used as the innermost magnetic shield of CMSS. In particular, the ten‐layer Fe‐Nano MSC achieves an average magnetic noise of 0.84 fT Hz −1/2 in the frequency range of 20–100 Hz. This work provides a lightweight, easily processable, and cost‐effective strategy for the magnetic shielding system with ultra‐low magnetic noise, which will promote its large‐scale application in emerging fields such as biomagnetism and fundamental physics.