In this paper, polymethylhydrosiloxane (PMHS) and ethanol were used as raw materials to synthesize the ceramic precursor of side ethoxy polysiloxane (PESO) using dehydration and a dealcoholization reaction, which had a ceramic yield of 87.15% and a very low residual carbon content. With the quartz fiber as a reinforcer, the silica matrix composites (SiO2f/SiO2) with a double-layer interface (PyC-SiO2/BNNSs) coating were manufactured using precursor impregnation pyrolysis (PIP). The as-prepared SiO2f/SiO2 possessed an excellent mechanical property, which exhibited obvious fiber pull-out and debonding phenomena from a fracture morphology. The flexural strength and fracture toughness of SiO2f/SiO2 reached 63.3 MPa and 2.52 MPa·m1/2, respectively. Moreover, the SiO2f/SiO2 had suitable dielectric properties, with a dielectric constant of about 2.5 and a dielectric loss of less than 0.01. This work provides an important concept for the enhancement of the dielectric properties and mechanical properties of quartz fiber-reinforced ceramic matrix composites, as well as in the preparation of wave-transmissivity composites.
The precursor-derived ceramic route is recognized as an advanced and efficient technique for fabricating ceramic matrix composites, particularly suitable for the development and microstructural tailoring of continuous fiber-reinforced ceramic matrix composites. In this work, octamethylcyclotetrasiloxane and tetravinylcyclotetrasiloxane were employed as monomers to synthesize a branched siloxane via ring-opening polymerization. A subsequent hydrosilylation reaction led to the formation of polyvinylsiloxane with a three-dimensional crosslinked structure. The precursor exhibited excellent fluidity, adjustable viscosity, and superior thermosetting characteristics, enabling efficient impregnation and densification of reinforcements through the polymer infiltration and pyrolysis process. Upon pyrolysis, the polyvinylsiloxane gradually converted from an organic polymer to an amorphous inorganic ceramic phase, yielding silicon oxycarbide ceramics with a high ceramic yield of 81.3%. Elemental analysis indicated that the resulting ceramic mainly comprised silicon and oxygen, with a low carbon content. Furthermore, the material demonstrated a stable dielectric constant (~2.5) and low dielectric loss (<0.01), which are beneficial for enhanced thermal stability and dielectric performance. These findings offer a promising precursor system and process reference for the low-cost production of high-performance, multifunctional ceramic matrix composites with strong potential for engineering applications.
SiC-W2B5/C composites were prepared through a novel and simple processing route (reaction hot-pressing). The density of composites increased from 96.1% to 99.2% with the increase in SiC content from 5 to 30 vol%, leading to significant improvements in mechanical properties such as flexural strength, fracture toughness, and Vickers hardness, which for the highest W15S30 composite were measured at 292.3 MPa, 6.12 MPa·m1/2, and 3.32 GPa, respectively. The fracture morphology exhibited a mixed fracture mode of transgranular and intergranular, along with a pull-out phenomenon, indicating a well-combined interface. The sintering process involved Si powder acting as a liquid-phase sintering agent, reacting with B4C to increase the B concentration and promote the generation of W2B5, as well as reacting with the carbon phase to generate a transition phase of Si-B-C. The presence of this transition phase enhanced the interface bonding strength and catalyzed the graphitization process. As the SiC content increased, the promotion effect became more pronounced, with the degree of graphitization increasing from 59.2% to 66.2%.